이미지는 참조용만

24LC1025-I/P

Name: 24LC1025-I/P
Rating: 4.7 (12 reviews)

IC EEPROM 1MBIT I2C 400KHZ 8DIP

제조업체
Mfr.부분 #24LC1025-I/P
패키지 8-DIP (0.300, 7.62mm)
데이터시트 24LC1025-I/P DataSheet
재고 있음4155

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Supplier	Microchip Technology
Package	Tube
ProductStatus	Active
MemoryType	Non-Volatile
MemoryFormat	EEPROM
Technology	EEPROM
MemorySize	1Mb (128K x 8)
MemoryInterface	I²C
ClockFrequency	400 kHz
WriteCycleTime-WordPage	5ms
AccessTime	900 ns
Voltage-Supply	2.5V ~ 5.5V
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Through Hole
Package/Case	8-DIP (0.300, 7.62mm)

개요

Description

24LC1025-I/P is Microchip’s 1-Mbit I2C serial EEPROM in an 8-pin package (Industrial temperature range, Plastic package). It provides non-volatile storage for microcontrollers with random and sequential access.
Key points:
- Capacity and organization: 1,048,576 bits ≈ 128 kBytes of storage.
- Interface: I2C two-wire bus (SCL/SDA); supports standard and fast I2C modes.
- Addressing: Uses 16-bit memory addressing to access the full array.
- Features: Page write and sequential read support; hardware write-protect (WP) pin to guard memory; low-power operation.
- Packaging: Available in common 8-pin packages; the –I/P suffix denotes Industrial temperature range and Plastic packaging.
Typical uses: storing configuration data, calibration parameters, logs, or any non-volatile data that must survive power cycles.
For exact electrical specs, timing, pinout, and device addressing details, consult the Microchip 24LC1025 datasheet.

Features

Here are concise features of 24LC1025-I/P (Industrial temp, Plastic package):
- 1 Kbyte (1024 × 8) I2C Serial EEPROM
- I2C two-wire interface; standard mode (100 kHz) and fast mode (400 kHz)
- 128-byte page write capability (writes within a page; wrap at page end)
- A0–A2 hardware address pins for multiple devices on the same bus (base address 0x50–0x57)
- WP (Write Protect) pin for hardware protection of memory
- Endurance: ~1,000,000 write cycles; data retention ~40 years
- Write cycle time: about ~5 ms; device supports ACK polling during write
- Industrial temperature range: -40°C to +85°C
- 8-pin Plastic package (I/P suffix indicates Industrial temp, Plastic package)
- Low-power operation with standby/idle modes
Note: specifics like exact voltage range and access times are per datasheet; ensure compatibility with your system.

Package

8-pin Plastic DIP (DIP-8) package, industrial temperature range.

Pinout

8 pins. It is a 2‑wire I2C serial EEPROM (non-volatile memory) with address pins A0–A2 and a write‑protect (WP) input. Pins: VCC, GND, SDA, SCL, WP, A0, A1, A2.

Manufacturer

- Manufacturer: Microchip Technology Inc.
- What kind of company: A US-based semiconductor company that designs and manufactures embedded control solutions, including microcontrollers (PIC), memory devices (EEPROMs like 24LC1025), analog ICs, and related products.

Application

24LC1025-I/P is a 1 Mbit I2C EEPROM with industrial temperature range (-40°C to 85°C) in a plastic package. Applications: nonvolatile storage of microcontroller parameters, calibration data, and device IDs; system configuration data and small logs; look-up tables, fonts, and display assets; data-logging buffers for embedded controllers; asset-tracking and sensor/metering parameter storage; boot/config memory for firmware-driven devices in industrial and consumer electronics.

Equivalent

Equivalent parts (I2C 1Kb EEPROMs) include:
- AT24C1025 (Atmel/Microchip)
- 24AA1025 (Microchip)
- M24C1025 (STMicroelectronics)
These are functionally equivalent to 24LC1025-I/P (1024 × 8, I2C). Check voltage range, temperature rating, and package to match your design.