이미지는 참조용만

74HC14PW,118

Name: 74HC14PW,118
Rating: 4.7 (12 reviews)

IC INVERTER 6CH 1-INP 14TSSOP

제조업체
Mfr.부분 #74HC14PW,118
패키지
데이터시트 74HC14PW,118 DataSheet
재고 있음210

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Supplier	Nexperia USA Inc.
Package	Tape & Reel (TR),Cut Tape (CT)
Series	74HC
ProductStatus	Active
LogicType	Inverter
NumberofCircuits	6
NumberofInputs	1
Features	Schmitt Trigger
Voltage-Supply	2V ~ 6V
Current-Quiescent(Max)	2 µA
Current-OutputHighLow	5.2mA, 5.2mA
LogicLevel-Low	0.3V ~ 1.2V
LogicLevel-High	1.5V ~ 4.2V
MaxPropagationDelay@VMaxCL	21ns @ 6V, 50pF
OperatingTemperature	-40°C ~ 125°C
MountingType	Surface Mount
SupplierDevicePackage	14-TSSOP

개요

Description

74HC14PW is a hex Schmitt-trigger inverter from the 74HC CMOS family. It contains six independent inverting gates with Schmitt-trigger inputs, giving hysteresis for clean switching of noisy or slowly varying signals.
Key points:
- Operation: 2–6 V supply (typical 5 V).
- Features: six SCHMITT-trigger gates, high input impedance, CMOS output drivers.
- Performance: fast switching with propagation delays in the tens of nanoseconds range (depends on Vcc and load).
- Package: PW suffix denotes a 14-pin plastic surface-mount package (SOP-like). Pinout is one input per gate (1A→1Y, …, 6A→6Y); power pins are Vcc and GND per device datasheet.
Common uses:
- Debouncing switches, waveform shaping, RC oscillators.
- Conditioning slow/noisy signals for CMOS logic downstream.
- Level shifting within the HC voltage range.
Note: Specs (thresholds, exact tpd, and pinouts) vary by manufacturer and exact PW variant, so consult the vendor datasheet for your part.

Features

74HC14PW is a hex Schmitt-trigger inverter (six independent inverters) in a 14-pin plastic package (PW). Key features:
- Six Schmitt-trigger inverters for clean switching of noisy or slowly changing signals
- Wide operating supply: 2 V to 6 V (typical at 5 V)
- CMOS device: low static and dynamic power, high fan-out capability
- Rail-to-rail output stages; suitable for driving standard CMOS/TTL loads
- Fast switching: propagation delay in the low tens of nanoseconds (depends on Vcc and load)
- Low input leakage and good noise margins due to hysteresis
- Ideal for debouncing, waveform shaping, oscillators, and level shifting
- Package: 14-pin plastic package (PW variant); alternative package types may be available
Note: exact electrical parameters (VIT+, VIT−, tpd, Icc) vary by supplier and device lot; consult the specific datasheet for precise numbers.

Package

Plastic DIP (PDIP), 14-pin through-hole package. The “PW” family variant indicates plastic DIP packaging, with “118” likely a lot/date code.

Pinout

Pin count: 14 pins.
Function: 74HC14PW is a hex Schmitt-trigger inverter (six independent inverting gates with hysteresis) in the HC logic family. Vcc on pin 14, GND on pin 7; inputs on pins 1,3,5,9,11,13 and outputs on pins 2,4,6,8,10,12.

Manufacturer

Manufacturer: Nexperia (formerly Philips/NXP Semiconductors).
Company type: A global semiconductor company that specializes in discrete components, logic ICs, and other standard integrated circuits.

Application

74HC14PW: Hex Schmitt-trigger inverter. Applications: switch debouncing, noise-immune input conditioning, RC oscillator/clock generation, pulse shaping/edge detection, level shifting, buffering for microcontroller interfaces, driving small loads, PWM signal conditioning.
For 74HC118, please confirm the exact part number; there isn’t a standard 74HC118 in common HC catalogues.

Equivalent

Equivalent parts (same function: hex Schmitt-trigger inverter, 14-pin):
- 74HC14 (NXP/Nexperia, ST, Onsemi, etc.)
- SN74HC14 (TI)
- 74HCT14 (TTL-compatible variant)
Other vendors’ 74HC14 in matching packages (DIP-14/SO-14) are interchangeable.