이미지는 참조용만

74HC245PW,118

Name: 74HC245PW,118
Rating: 4.7 (12 reviews)

IC TRANSCVR TRI-ST 8BIT 20TSSOP

제조업체
Mfr.부분 #74HC245PW,118
패키지 20-TSSOP (0.173, 4.40mm Width)
데이터시트 74HC245PW,118 DataSheet
재고 있음487

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Supplier	Rochester Electronics, LLC
Package	Bulk
Series	74HC
ProductStatus	Active
LogicType	Transceiver, Non-Inverting
NumberofElements	1
NumberofBitsperElement	8
OutputType	3-State
Current-OutputHighLow	7.8mA, 7.8mA
Voltage-Supply	2V ~ 6V
OperatingTemperature	-40°C ~ 125°C (TA)
MountingType	Surface Mount
Package/Case	20-TSSOP (0.173, 4.40mm Width)

개요

Description

74HC245PW,118 is an 8-bit bidirectional bus transceiver from the 74HC family. It connects two 8-bit buses (A0–A7 and B0–B7) with a single direction control (DIR) and an active-low output enable (/OE).
- Operation: When /OE is low, data flows in the direction specified by DIR: DIR = 0 transfers A→B; DIR = 1 transfers B→A. When /OE is high, both sides are high-impedance.
- Power: Vcc typically 4.5–5.5 V (can operate from 2–6 V).
- Packaging: PW denotes a plastic DIP 20-pin package.
- Use cases: bus sharing/isolation between devices (microcontrollers, memories, peripherals), where tri-state control is needed to prevent bus contention.
- Notes: Check the datasheet for exact pinout and timing. The “118” is likely a date/lot code and doesn’t affect function.

Features

Key features of 74HC245PW,118:
- 8-bit bidirectional bus transceiver with 3-state outputs
- A and B data buses (A0–A7 and B0–B7)
- Direction control input (DIR): A↔B data flow selection
- Output enable (G): tri-states both ports when asserted
- CMOS technology, high speed, low power
- Supply voltage: typically 2 V to 6 V (5 V CMOS common)
- TTL/CMOS-compatible input thresholds (at applicable Vcc)
- Suitable for bus interfacing, data buffering, and isolation in microprocessor/mmemory systems
- Package: 20-pin plastic package (PW variant) commonly available as DIP/PLASTIC variants
Notes: Always check the exact datasheet for temperature range and packaging options for your specific lot/version.

Package

Plastic DIP (20-pin DIP, 0.3" wide). The “PW” indicates Plastic DIP; “118” is a date/lot code.

Pinout

- Pin count: 20 pins (DIP-20 / SOIC-20).
- Function: 8-bit bidirectional bus transceiver with tri-state outputs. Data can transfer between two buses (A0–A7 and B0–B7) controlled by DIR (direction) and OE (output enable). Used to connect buses while allowing high-impedance when disabled.

Manufacturer

Manufacturer: Nexperia.
Type of company: A Dutch multinational semiconductor company that specializes in discrete components, logic ICs, and MOSFET devices (a spin-off from Philips/NXP).

Application

- 74HC245PW: Octal bidirectional bus transceiver with 3-state outputs. Applications: CPU/memory and CPU/I/O bus buffering, bus isolation, level shifting between logic families, and data-path multiplexing in microprocessor systems.
- 74HC118: Typically a decoder/demultiplexer in the 74HC family. Applications: address/data decoding and device selection in memory-mapped systems, peripheral demultiplexing, display decoding, and simple logic routing.

Equivalent

Equivalent parts (octal bidirectional bus transceiver with 3-state outputs):
- TI SN74HC245N (SN74HC245 family)
- STMicroelectronics 74HC245 (D/SO variants)
- NXP/Philips 74HC245PW (same device in PW package; 118 is date code)
- 74HCT245N (TTL-input compatible)
- 74LVC245A (low‑voltage CMOS)
- 74F245 / 74ACT245 (faster CMOS variants)
Note: check voltage/pinout for exact packaging and compatibility.