이미지는 참조용만

74LCX125MX

Name: 74LCX125MX
Rating: 4.7 (12 reviews)

BUS DRIVER, LVC/LCX/Z SERIES, 4-

제조업체
Mfr.부분 #74LCX125MX
패키지
데이터시트 74LCX125MX DataSheet
재고 있음2132

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Supplier	Rochester Electronics, LLC
Package	Bulk
ProductStatus	Active

개요

Description

74LCX125MX is a quad buffer/driver with tri-state (3-state) outputs built on a low-power CMOS LCX process. It contains four independent noninverting buffer sections; each has its own active-low output-enable (OE). When OE is low, the corresponding input passes to the output; when OE is high, the output is high-impedance. This allows you to buffer signals, isolate devices on a shared bus, or perform level shifting between domains.
Key points:
- Four buffers with separate OE inputs
- Noninverting data path
- Outputs go hi-Z when enabled (OE high)
- Suitable for buffering/isolating digital signals and bus sharing
- Low-power LCX family device; CMOS/TTL-compatible inputs
Typical uses: expanding fan-out from a microcontroller, buffering data/address buses, or acting as a controllable buffer between subsystems.
For exact electrical specs (voltage range, drive, timing, and package details), refer to the specific 74LCX125MX datasheet.

Features

Key features of 74LCX125MX:
- Quad noninverting buffers with 3-state outputs (four independent buffers)
- Each buffer has its own output-enable input (tri‑state control)
- Outputs go high impedance when disabled, suitable for bus interfacing
- CMOS low-power LCX technology with relatively wide Vcc range
- Operates typically at 2.7–3.6 V (3.3 V systems common)
- TTL/CMOS input compatibility, robust ESD protection
- Fast switching suitable for medium-speed logic applications
- 14-pin package variant (MX) available (e.g., SOIC-14/DIP-14 formats)
Applications include bus interfacing, level shifting between parts, and any circuit requiring four independent buffers with tri-state outputs.

Package

MX indicates a molded small-outline package. The 74LCX125MX is a 14-pin plastic Small Outline package (SOIC-14).

Pinout

Pin count: 14 pins (14‑pin package).
Function: Quad buffer/line driver with 3‑state outputs. It contains four independent non‑inverting buffers (A1→Y1, A2→Y2, A3→Y3, A4→Y4) each with its own active‑low output enable (OE1–OE4). When OE is low, the input is passed to the output; when OE is high, the corresponding output is high impedance.

Manufacturer

Manufacturer: Nexperia (a Dutch semiconductor company, spun off from NXP/Philips).
What kind of company: A global semiconductor company that designs and manufactures discrete components and logic integrated circuits used in electronics.

Application

74LCX125MX is a quad buffer/line driver with 3-state outputs. Common applications:
- Buffering and isolating data/address bus signals in microprocessor/microcontroller systems
- Level-shifting between different logic voltages (e.g., 5V to 3.3V)
- Driving multiple loads or long lines to reduce CPU load
- Enabling/disabling data paths with OE for tri-state bus sharing and multiplexing
- Backplane/general bus interface signaling and signal conditioning

Equivalent

74LCX125MX is a 4‑bit quad buffer/line driver with 3-state outputs. Equivalents (quad 3-state buffers):
- TI: SN74LCX125, SN74LVC125A (MX is just the package)
- ON Semiconductor: MC74LCX125A, MC74LCX125MX
- NXP/Nexperia: 74LCX125 (and 74LVC125A variants)
- STMicroelectronics: 74LVC125A
Note: all are functionally equivalent; choose based on voltage/pin/package needs.