ACS724LLCTR-10AB-T

이미지는 참조용만

ACS724LLCTR-10AB-T

SENSOR CURRENT HALL 10A AC/DC

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package Tape & Reel (TR),Cut Tape (CT),Bulk
ProductStatus Active
ForMeasuring AC/DC
SensorType Hall Effect, Open Loop
Current-Sensing 10A
NumberofChannels 1
Output Ratiometric, Voltage
Sensitivity 200mv/A
Frequency DC ~ 120kHz
Linearity ±1.5%
Accuracy ±1%
Voltage-Supply 4.5V ~ 5.5V
ResponseTime 4µs
Current-Supply(Max) 14mA
OperatingTemperature -40°C ~ 150°C
Polarization Bidirectional
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

개요

Description

The ACS724LLCTR-10AB-T is a Hall-effect current sensor IC manufactured by Allegro MicroSystems. It is designed to provide accurate and reliable current measurement in both AC and DC systems. The sensor can measure currents up to 10 Amperes and outputs an analog voltage proportional to the detected current. The device features a wide operating voltage range and high bandwidth, making it suitable for various applications, including motor control, load detection, and overcurrent fault protection.
Key features of the ACS724LLCTR-10AB-T include its low-noise analog signal path, near-zero magnetic hysteresis, and high electrical isolation between the measured current and the output signal. It operates over a wide temperature range, making it robust for harsh environments. The chip is designed to be surface-mounted (TSSOP package), which allows for easy integration into circuit designs. Its low-profile design and precision make it ideal for compact applications where space is a constraint. The ACS724LLCTR-10AB-T offers a cost-effective and efficient solution for current sensing needs in industrial, automotive, and consumer electronics.

Features

The ACS724LLCTR-10AB-T is a Hall-effect-based current sensor IC designed for AC or DC current sensing in industrial, automotive, commercial, and communications systems. Key features include:
1. Current Sensing Range: It can measure currents up to ±10 A with high accuracy.

2. Sensitivity: It provides a sensitivity of 264 mV/A, allowing for precise current measurements.
3. Bandwidth: The sensor offers a bandwidth of 120 kHz, suitable for applications requiring fast response times.
4. Accuracy: The device is designed to minimize error at ±1% full-scale output error.
5. Supply Voltage: It operates on a single 3.3 V or 5 V supply.
6. Output: Provides an analog voltage output proportional to the sensed current.
7. Isolation: Offers galvanic isolation with a typical isolation voltage of 2.4 kV RMS, making it safe for measuring high voltages.
8. Temperature Range: The sensor operates over a wide temperature range from -40°C to 150°C, making it suitable for harsh environments.
9. Package: It comes in a small, surface-mount SOIC-8 package.
These features make the ACS724LLCTR-10AB-T ideal for precise and reliable current sensing across various applications.

Package

The ACS724LLCTR-10AB-T is packaged in a surface-mount SOIC-8 (Small Outline Integrated Circuit) package.

Pinout

The ACS724LLCTR-10AB-T is a Hall-effect-based linear current sensor IC manufactured by Allegro MicroSystems. It typically comes in a SOIC-8 package, which means it has 8 pins. The primary function of the ACS724LLCTR-10AB-T is to provide economical and precise solutions for AC or DC current sensing. Here’s a brief overview of its pin functions:
1. VCC (Pin 1): Power supply pin, typically 5V.
2. VIOUT (Pin 2): Analog output voltage pin, providing a voltage proportional to the sensed current.
3. FILTER (Pin 3): Optional external filter capacitor connection to enhance performance.
4. GND (Pin 4): Ground pin for power return.
5-8. IP+ (Pin 5 & 6), IP- (Pin 7 & 8): Current path pins. The current to be measured flows through these pins, creating a magnetic field detected by the Hall sensor.
These sensors are used widely in various applications, including motor control, load detection and management, and overcurrent fault protection.

Manufacturer

The ACS724LLCTR-10AB-T is manufactured by Allegro MicroSystems. Allegro MicroSystems is a company that specializes in developing, manufacturing, and marketing high-performance power and sensing semiconductor products. They focus on providing innovative solutions primarily for motion control and energy-efficient systems. Allegro serves markets such as automotive, industrial, and consumer electronics, with a strong emphasis on sensor ICs and power ICs.

Application

The ACS724LLCTR-10AB-T is a Hall-effect-based linear current sensor IC used in various applications requiring accurate current sensing. Key application areas include motor control, power management systems, load detection, overcurrent protection, and battery monitoring. It is widely used in industrial automation, consumer electronics, and automotive systems due to its ability to detect AC and DC currents with high precision and reliability. Its small form factor and surface-mount package also make it suitable for compact electronic designs.

Equivalent

The ACS724LLCTR-10AB-T is a Hall-effect current sensor. Equivalent products include:
1. ACS712 series (e.g., ACS712ELCTR-05B-T) from Allegro MicroSystems.
2. ACS725 series for higher bandwidth or isolation.
3. INA219 from Texas Instruments for digital output with I2C interface.
4. LEM’s HO series for similar Hall-effect based solutions.
5. Tamura's L01Z series.
Ensure specification compatibility, such as current range, sensitivity, and package size, when selecting equivalents.

배송

배송 방법We

DHL, FedEx, TNT, UPS 또는 선택한 다른 운송업체를 통해 글로벌 배송 서비스를 제공합니다.


배송 요금 참조 (DHL/FedEx):

DHL은: 배송 비용은 $25-$45 (0.5kg)에서 2-5 영업일의 추정적 배달 시간이 있습니다.

FedEx는: 배송 비용은 $25-$40 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

UPS는: 배송 비용은 $25-$45 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

TNT는: 배송 비용은 $25-$65 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

EMS는: 배송 비용은 $30-$50 (0.5kg)에서 7-15 영업일의 추정적 배달 시간을 제공합니다.

등록된 항공우편: 배송 비용은 $2-$4 (0.1kg), 예상 배달 시간 5-20 영업일.

지불

Payment Methods

지불 기간은 100% 사전 지불입니다.

현재, 우리는 아래 지불 방법만 받아들입니다.:

1. PayPal

2. 신용/직불 카드

3. 전선 전송