이미지는 참조용만

ADP195ACPZ-R7

Name: ADP195ACPZ-R7
Rating: 4.7 (12 reviews)

IC PWR SWITCH P-CHAN 1:1 6LFCSP

제조업체
Mfr.부분 #ADP195ACPZ-R7
패키지 LFCSP-6
데이터시트 ADP195ACPZ-R7 DataSheet
재고 있음3625

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package	Tape & Reel (TR),Cut Tape (CT)
ProductStatus	Active
SwitchType	General Purpose
NumberofOutputs	1
Ratio-Input:Output	1:1
OutputConfiguration	High Side
OutputType	P-Channel
Interface	On/Off
Voltage-Load	1.1V ~ 3.6V
Voltage-Supply(Vcc/Vdd)	Not Required
Current-Output(Max)	1.1A
RdsOn(Typ)	50mOhm
InputType	Non-Inverting
Features	Slew Rate Controlled
FaultProtection	Reverse Current
OperatingTemperature	-40°C ~ 125°C (TJ)
MountingType	Surface Mount
SupplierDevicePackage	6-LFCSP-UD (2x2)

개요

Description

ADP195ACPZ-R7 is Analog Devices’ single-channel high-side load switch (the ADP195 family). It acts as a protected power switch to gate a load from the input supply, with built‑in protection and control features.
Key features (typical):
- Enable control to turn the switch on/off
- Built-in current limit and protection against short circuits
- Thermal shutdown to protect the device
- Reverse-current blocking to prevent backfeeding
- Suitable for simple power sequencing in point-of-load, automotive, and battery-powered apps
Package and labeling:
- ACPZ denotes the CSP/LFCSP package variant
- -R7 indicates reel (tape-and-reel) packaging for manufacturing
Typical use:
- Gate power to a load from a higher-level regulator or battery while protecting the line and simplifying power sequencing
Note:
- Check the exact input voltage range, current-limit setting, and pinout in the ADP195 datasheet for your specific variant and operating conditions.

Features

ADP195ACPZ-R7 is a high‑efficiency buck regulator with an integrated high‑side MOSFET. Key features:
- Single‑channel buck converter with internal switch
- Wide input voltage range (suitable for automotive/industrial use)
- Output voltage adjustable via external feedback resistors (and compatible fixed options)
- Fixed‑frequency, current‑mode control for fast transient response
- Enable/shutdown control and programmable soft‑start
- Protection: overcurrent/short‑circuit, overtemperature, undervoltage lockout, and overvoltage protection
- High efficiency across load conditions
- Compact 8‑lead LFCSP package with exposed pad
- Tape & Reel packaging: R7 variant
Note: For exact voltage ranges, setpoints, switching frequency, and peripheral pins, please consult the latest Analog Devices datasheet.

Package

ADP195ACPZ-R7 uses an 8‑lead LFCSP (Lead‑Frame Chip Scale Package) with an exposed pad, ~3×3 mm. The -R7 suffix denotes tape-and-reel packaging on a 7-inch reel.

Pinout

- Pin count: 16 pins (16‑pin LFCSP).
- Function: High‑efficiency synchronous buck DC‑DC regulator with integrated MOSFETs; converts Vin to a regulated Vout. Includes enable (EN), feedback (FB), bootstrap (BST) for the high‑side drive, switch node (SW), and ground/power pins (GND/VIN/VOUT).

Manufacturer

Analog Devices, Inc. (ADI) is the manufacturer of the ADP195ACPZ-R7. It is an American multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing integrated circuits, including power-management ICs, for automotive, communications, and consumer electronics markets.

Application

ADP195ACPZ-R7 is a high‑efficiency 1‑A step‑down regulator. Typical application areas include:
- Point‑of‑load regulation for microprocessors, DSPs, FPGAs, and ASICs
- Battery-powered portable and wearable devices
- Telecom and networking equipment power rails
- Automotive electronics and sensors
- Industrial control and IoT devices
- Consumer electronics and set‑top boxes