이미지는 참조용만

AQY412EHA

Name: AQY412EHA
Rating: 4.7 (12 reviews)

SSR RELAY SPST-NC 550MA 0-60V

제조업체
Mfr.부분 #AQY412EHA
패키지
데이터시트
재고 있음21723

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Series	PhotoMOS™ AQY
Part Status	Active
Base Product Number	AQY412
Mounting Type	Surface Mount
Relay Type	Photo-Coupled Relay (Photorelay)
Circuit	SPST-NC (1 Form B)
Output Type	AC, DC
Voltage - Input	1.14VDC
Voltage - Load	0 V ~ 60 V
Load Current	550 mA
Termination Style	Gull Wing
Operating Temperature	-40°C ~ 85°C
Package	4-SMD (0.300", 7.62mm)
Supplier Device Package	4-SMD
Approval Agency	BSI, cURus
Packaging	Tube
On-State Resistance (Max)	2.5 Ohms

개요

Description

AQY412EHA is Panasonic’s single-channel photomos relay (optically isolated MOSFET output) in the AQY family. It uses an input LED to optically actuate two MOSFETs on the output side, providing galvanic isolation between input and output.
Key points:
- 1-channel optically isolated switch; MOSFET output can switch DC and AC loads.
- High input-to-output isolation for safety and noise immunity.
- Input side requires only a small drive current (LED forward current in the few mA range) to turn on; off-state leakage is small.
- Output side offers bidirectional MOSFET switching with low on-resistance when on (no mechanical wear, fast switching).
Typical uses:
- Signal isolation for microcontrollers and logic circuits
- Interface between low-voltage controllers and higher-voltage loads
- Industrial, automotive, and consumer electronics where galvanic isolation is desired
For exact electrical specifications (Vds, If, Id, Rds(on), isolation voltage, package), refer to the AQY412EHA datasheet.

Features

AQY412EHA is a Panasonic PhotoMOS relay (MOSFET output). Key features:
- 1-channel, Form A (normally open) output
- MOSFET output with no mechanical contacts (no bounce, long life)
- High input–output isolation (several kV RMS typical)
- Low input drive current (LED-driven)
- Quick switching with very low on resistance and leakage when OFF
- Small surface-mount package (8-pin) and RoHS compliant
- Wide operating temperature range
Note: exact electrical ratings (Vds, Id, Ron, leakage, etc.) vary by part; consult the datasheet for the precise values of AQY412EHA.

Package

AQY412EHA is a Panasonic PhotoMOS relay in an 8-pin surface-mount package (SOP-8, gull-wing).

Pinout

AQY412EHA has 4 pins. Function: it’s a PhotoMOS (solid‑state) relay — a single‑pole, normally‑open (1 Form A) optically‑isolated device. Two pins are the LED input (anode, cathode) and two are the MOSFET output terminals (isolated source/drain) used to switch AC/DC loads.

Manufacturer

- Manufacturer: Panasonic (Panasonic Corporation, via its Semiconductor Solutions division; AQY series PhotoMOS relays).
- Company type: A Japanese multinational electronics company that designs and manufactures consumer electronics, semiconductors, and other electronic components.

Application

AQY412EHA is a PhotoMOS relay (optically isolated MOSFET output). Typical applications include:
- Isolated switching of low-power loads controlled by microcontrollers
- Relay replacement in control circuits
- Driving small AC/DC loads in consumer electronics
- LED lighting control
- Signal isolation in industrial automation
- Telecom/network equipment
- Measurement/test equipment
- Home appliances and HVAC controller boards