AT24C02C-SSPD-T

The AT24C02C-SSPD-T is a 2-kilobit (256 x 8-bit) EEPROM (Electrically Erasable Programmable Read-Only Memory) device from Microchip Technology. It utilizes I2C (Inter-Integrated Circuit) communication protocol, allowing multiple devices to connect using only two wires (SDA and SCL). This chip operates with a supply voltage typically between 1.7V and 5.5V, making it suitable for a wide range of applications, including consumer electronics, automotive, and industrial devices.
The AT24C02C features a standard write cycle time of 5 ms, with up to 1 million write/erase cycles, ensuring durability and reliability. It includes built-in write protection mechanisms to prevent accidental overwrites. The device is packaged in a compact surface mount format (SSPD), enabling easy integration into space-constrained designs.
Overall, the AT24C02C-SSPD-T is ideal for applications needing non-volatile memory storage for configuration settings, calibration data, or any application requiring persistent storage even when power is removed.

The AT24C02C-SSPD-T is a 2K-bit (256 x 8) electrically erasable programmable read-only memory (EEPROM) device designed for low-power applications. Key features include:
1. Interface: I2C-compatible, supporting standard and fast modes, allowing up to 400 kHz data rates.
2. Memory Organization: 256 bytes of memory with a page write capability of 16 bytes.
3. Endurance: Supports a minimum of 1 million write/erase cycles per byte and a data retention of over 40 years.
4. Low Power Consumption: Operates at a wide voltage range (1.7V to 5.5V) with low active and standby current.
5. Addressing: 2-wire addressable with up to 8 devices on the same bus.
6. Package: Available in a small 8-pin SOIC and TSSOP packages, suitable for space-constrained designs.
7. Write Protection: Hardware write protect feature to enhance data security.
These attributes make the AT24C02C-SSPD-T ideal for various applications, including consumer electronics, automotive, and industrial systems.

The AT24C02C-SSPD-T is packaged in an 8-pin SOIC (Small Outline Integrated Circuit) package.

The AT24C02C-SSPD-T is a 2K bit (256 x 8) EEPROM (Electrically Erasable Programmable Read-Only Memory) with a total of 8 pins.
Pin Functions:
1. VCC (Pin 1): Power supply (typically 1.8V to 5.5V).
2. GND (Pin 2): Ground reference.
3. SDA (Pin 3): Serial Data Line for data input/output.
4. SCL (Pin 4): Serial Clock Line for synchronizing data transmission.
5. WP (Pin 5): Write Protect; when connected to VCC, write operations are disabled.
6. A0 (Pin 6): Address pin 0; used to select the device address for multiple devices on the same bus.
7. A1 (Pin 7): Address pin 1; also used for device address selection.
8. A2 (Pin 8): Address pin 2; further extends device address selection capabilities.
The device communicates using the I²C protocol, allowing for efficient data storage and retrieval.

The AT24C02C-SSPD-T is manufactured by Microchip Technology Inc. Microchip is a leading provider of microcontroller, mixed-signal, analog, and Flash-IP solutions. Established in 1989, the company specializes in semiconductor products and offers a wide range of solutions for various applications, including automotive, industrial, consumer, and communication sectors. Microchip is recognized for its commitment to innovation and quality in embedded control products, supporting engineers with development tools, software, and technical support.

The AT24C02C-SSPD-T is a 2Kb I2C EEPROM primarily used in applications such as consumer electronics, automotive systems, smart meters, and industrial automation. Its non-volatile memory is ideal for storing configuration settings, calibration data, and firmware updates. Additionally, it serves in portable devices, RFID tags, and data logging applications where reliable and low-power memory storage is essential.

The AT24C02C-SSPD-T chip is a 2K-bit I2C EEPROM. Equivalent products include:
1. Microchip 24LC02
2. STMicroelectronics M24C02
3. NXP/NXP PCF EEPROMs like PCF8572
4. Winbond W25X02
5. Maxim MAX1602
Always verify specifications for compatibility regarding voltage, speed, and pin configuration before selecting an equivalent.