이미지는 참조용만

ATXMEGA64A1U-CUR

Name: ATXMEGA64A1U-CUR
Rating: 4.7 (12 reviews)

IC MCU 8/16BIT 64KB FLSH 100CBGA

제조업체
Mfr.부분 #ATXMEGA64A1U-CUR
패키지 100-TFBGA
데이터시트 ATXMEGA64A1U-CUR DataSheet
재고 있음5342

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Supplier	Microchip Technology
Package	Tape & Reel (TR),Cut Tape (CT)
Series	AVR® XMEGA® A1U
ProductStatus	Active
CoreProcessor	AVR
CoreSize	8/16-Bit
Speed	32MHz
Connectivity	EBI/EMI, I²C, IrDA, SPI, UART/USART
Peripherals	Brown-out Detect/Reset, DMA, POR, PWM, WDT
NumberofI/O	78
ProgramMemorySize	64KB (32K x 16)
ProgramMemoryType	FLASH
EEPROMSize	2K x 8
RAMSize	4K x 8
Voltage-Supply(Vcc/Vdd)	1.6V ~ 3.6V
DataConverters	A/D 16x12b; D/A 4x12b
OscillatorType	Internal
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	100-TFBGA

개요

Description

ATxmega64A1U-CUR is an AVR XMEGA microcontroller from Microchip/Atmel. It’s an 8/16-bit MCU with 64 KB of flash program memory and integrated USB 2.0 full‑speed device support, designed for USB-enabled embedded applications.
Key features (typical for this device family):
- Rich peripheral set: multiple USARTs, SPI, TWI/I2C, several timers, and a 12-bit ADC.
- Flexible I/O and clock options, plus advanced peripherals like the Event System and a Peripheral DMA Controller (PDCA) for efficient data transfer.
- Power-management modes suitable for low-power designs.
- Commercial-temperature/packaging variant indicated by the CUR suffix (verify exact package/pinout in the datasheet).
Development tools:
- Supported by Microchip Studio (formerly Atmel Studio), AVR-GCC, and MPLAB X.
- Commonly used in USB peripherals, data acquisition, and consumer/embedded control projects.
Note: The CUR suffix specifies packaging/temperature variant; check the datasheet for exact pin count, package type, and electrical details.

Features

Key features of ATXMEGA64A1U-CUR:
- 8-bit AVR XMEGA core with hardware multiplier; up to 32 MHz operation
- Memory: 64 KB Flash, 8 KB SRAM, 2 KB EEPROM
- USB: Full-Speed USB 2.0 device controller
- Communications: up to 4 USARTs, SPI, TWI (I2C)
- Analog: 12-channel, 12-bit ADC; Analog comparator; onboard voltage reference
- Timers: multiple 16-bit timers with PWM capabilities
- DMA/Event System for peripherals and memory transfers
- CRC engine for data integrity
- Power management: sleep modes, brown-out detector
- In-System Programming with boot loader support
- Package: 64-pin (CUR) pinout
Notes: exact peripheral counts may vary by package/revision; consult the datasheet for precise specs.

Package

64‑pin LQFP (Thin Quad Flat Pack) package.

Pinout

Pin count: 100 pins (CUR package).
Function: USB-enabled 8-bit AVR XMEGA microcontroller (ATxmega64A1U) with 64 KB flash, intended for embedded control applications.

Manufacturer

Manufacturer: Atmel Corporation (now part of Microchip Technology).
What kind of company: A semiconductor company that designs and manufactures microcontrollers and other embedded integrated circuits; after 2016, Atmel products are sold under Microchip Technology.

Application

- Industrial automation and process control
- Motor control and power electronics
- Sensing, data acquisition, and instrumentation
- USB-enabled peripherals and communication devices
- Building/home automation and IoT gateways
- General embedded/consumer electronics needing low power and rich peripherals

Equivalent

Equivalents depend on intent: there isn’t a published exact cross-reference for ATXMEGA64A1U-CUR. It’s part of the XMEGA A1U family (64 KB Flash, USB). Closest substitutes are other XMEGA A1U devices with the same memory/USB in a different package (e.g., ATxmega64A1U in another code) or similar 64 KB parts in the A1U family. For a guaranteed substitute, use Microchip’s cross-reference tool or specify required package and peripherals.