이미지는 참조용만

CY7C64215-28PVXCT

Name: CY7C64215-28PVXCT
Rating: 4.7 (12 reviews)

IC CNTRLR USB FS 28SSOP

제조업체
Mfr.부분 #CY7C64215-28PVXCT
패키지 28-SSOP (0.209, 5.30mm Width)
데이터시트 CY7C64215-28PVXCT DataSheet
재고 있음8920

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Supplier	Cypress Semiconductor Corp
Package	Tape & Reel (TR),Cut Tape (CT)
Series	enCoRe™ III
ProductStatus	Active
Applications	USB Microcontroller
CoreProcessor	M8C
ProgramMemoryType	FLASH (16kB)
ControllerSeries	CY7C642xx
RAMSize	1K x 8
Interface	I²C, USB
NumberofI/O	22
Voltage-Supply	3V ~ 5.25V
OperatingTemperature	0°C ~ 70°C
MountingType	Surface Mount
Package/Case	28-SSOP (0.209, 5.30mm Width)

개요

Description

CY7C64215-28PVXCT is a Cypress (Infineon) EZ-USB USB 2.0 peripheral controller from the FX2/FX2LP family. It combines a USB 2.0 transceiver, an on‑chip 8051‑class microcontroller, RAM, and multiple endpoints with a DMA engine, enabling you to implement a USB device without a separate MCU or host controller.
Key points:
- Used to build custom USB peripherals (HID, bulk transfer devices, USB bridges, data acquisition, etc.).
- Firmware runs on the on‑chip MCU via Cypress FX2/FX2LP APIs to manage USB enumeration, transfers, and endpoint handling.
- -28PVXCT denotes the package/industrial variants (roughly a 28‑pin package; package code and temperature range).
- Supports USB full/hi‑speed operation depending on design and host capabilities.
For precise electrical specs, memory, endpoint counts, GPIOs, and programming details, consult the CY7C64215 datasheet and Cypress/Infineon FX2LP development tools.

Features

CY7C64215-28PVXCT is a Cypress USB 2.0 slave-FIFO controller. Key features (typical for this device family):
- Hi-Speed USB 2.0 interface (480 Mbps) with full-speed compatibility
- Slave FIFO architecture: two independent FIFOs (A and B) for streaming data to/from a host MCU or FPGA
- Flexible data path: supports 8-bit or 16-bit data bus widths
- On-chip USB transceiver and protocol engine (no external PHY required)
- Configurable FIFO sizes, thresholds, and flow control; supports efficient, DMA-like transfers
- Interrupts and status signals for robust host–device handshaking
- EEPROM/configuration support for easy integration
- 28-pin PVXCT package option (compact, suitable for surface-mount designs)
Note: exact FIFO sizes, supported endpoint configurations, and voltage ranges can vary by variant; consult the official datasheet for precise specifications for your exact package/revision.

Package

It's a 28-pin Plastic Small-Outline package (SOIC). The -28P indicates 28 pins; PVX is Cypress’ package family code, and CT denotes cut-tape packaging.

Pinout

- Pin count: 28 pins (28-pin package)
- Function: Cypress EZ-USB USB 2.0 peripheral/controller (USB interface/bridge device with general-purpose I/O for a microcontroller system).

Manufacturer

- Manufacturer: Cypress Semiconductor Corporation (now part of Infineon Technologies AG).
- Company type: A semiconductor company that designs and manufactures integrated circuits (e.g., USB controllers, microcontrollers, memory, and analog/mixed-signal ICs) for various markets.

Application

CY7C64215-28PVXCT is a USB 2.0 high-speed hub controller. Typical applications include:
- External USB hubs (2/4 ports)
- Docking stations and USB PCIe/embedded add-on cards
- USB bridge/adapter solutions
- Portable storage enclosures
- USB peripherals (printers, scanners, cameras, keyboards/mice) in embedded, consumer electronics and industrial equipment.

Equivalent

Are you asking for a cross-reference to a pin‑compatible replacement? There isn’t a single exact non‑Cypress equivalent. For closest substitutions, use distributor cross‑reference tools (Digi‑Key/Mouser) or Infineon/Cypress support—provide the package, required features, and USB function.