이미지는 참조용만

DG408DY

Name: DG408DY
Rating: 4.7 (12 reviews)

IC MULTIPLEXER 8X1 16SOIC

제조업체
Mfr.부분 #DG408DY
패키지 16-SOIC (0.154, 3.90mm Width)
데이터시트
재고 있음4389

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Supplier	Analog Devices Inc./Maxim Integrated
Package	Tube
ProductStatus	Active
Multiplexer/DemultiplexerCircuit	8:1
NumberofCircuits	1
On-StateResistance(Max)	100Ohm
Channel-to-ChannelMatching(ΔRon)	1.5Ohm
Voltage-SupplySingle(V+)	5V ~ 30V
Voltage-SupplyDual(V±)	±5V ~ 20V
SwitchTime(TonToff)(Max)	150ns, 150ns
ChargeInjection	2pC
ChannelCapacitance(CS(off)CD(off))	3pF, 26pF
Current-Leakage(IS(off))(Max)	500pA
Crosstalk	-92dB @ 100kHz
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	16-SOIC (0.154, 3.90mm Width)

개요

Description

DG408DY is an 8-channel CMOS analog switch/multiplexer. It lets you connect one of eight analog inputs to a common output (or route a common input to one of eight outputs) under control of three select lines. It provides high-impedance paths for non-selected channels and a low, defined on-resistance for the selected path. Typical uses include signal routing in data acquisition, instrumentation, sensor multiplexing, and test equipment. Key features usually include break-before-make switching, a wide supply range, and low leakage. The “DY” suffix denotes a specific packaging/variant of the device (temperature/lead form). For exact electrical specs (on-resistance, leakage, bandwidth), timing diagrams, pinout, and rail requirements, consult the official datasheet from the manufacturer.

Features

DG408DY is a CMOS analog switch (DG408 family) used as an 8-channel analog switch/multiplexer/demultiplexer. Typical features (common to DG408-type parts):
- CMOS bilateral analog switch with multiple pass channels
- Wide supply range (single or dual supply; supports rail-to-rail signaling in many ranges)
- Low on-resistance and low leakage when off
- High off-isolation and good signal integrity
- Fast switching with low charge injection
- Control inputs compatible with TTL/CMOS logic levels
- Low quiescent power
- Available in compact packages; DY suffix commonly indicates a specific package (e.g., DIP-8 or related)
Note: exact parameters (R_on, leakage, bandwidth, control voltage ranges, and package options) vary by vendor and exact DG408DY revision. For precise figures, consult the datasheet for the specific manufacturer/year.

Package

DG408DY is in a 16‑pin plastic DIP package (DIP-16).

Pinout

- Pin count: 8 (DIP-8/SO-8 package)
- Function: DG408DY is an SPDT analog switch (single-pole double-throw) used to route an analog signal between two terminals under a control input.

Manufacturer

Manufacturer: Vishay Intertechnology (Siliconix brand).
What kind of company: A global semiconductor company that designs and manufactures discrete semiconductors, integrated circuits, and passive components for the electronics industry.

Application

DG408DY is an analog switch/multiplexer IC. Typical applications include:
- Signal routing and channel multiplexing in data acquisition and instrumentation
- Sample-and-hold and programmable analog front-ends
- Audio/video routing in consumer/professional gear
- Test and measurement equipment for selecting references or sensor/calibration signals
- Reconfigurable analog signal paths in portable and lab equipment

Equivalent

Possible equivalents for DG408DY (8-channel CMOS analog mux/demux):
- ADG408 / ADG409 (Analog Devices)
- CD4051B (Renesas/TI/NXP line)
- 74HC4051 / 74HCT4051 (TI, NXP, etc.)
Note: pinouts and voltage ranges vary; verify against the DG408DY datasheet for exact replacement.