이미지는 참조용만

FODM217A

Name: FODM217A
Rating: 4.7 (12 reviews)

OPTOISO 3.75KV 1CH TRANS 4-SOP

제조업체
Mfr.부분 #FODM217A
패키지
데이터시트
재고 있음27543

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Series	FODM217
Part Status	Active
Base Product Number	FODM217
Number of Channels	1
Voltage - Isolation	3750Vrms
Current Transfer Ratio (Min)	80% @ 5mA
Current Transfer Ratio (Max)	160% @ 5mA
Turn On / Turn Off Time (Typ)	3µs, 3µs
Rise / Fall Time (Typ)	2µs, 3µs
Input Type	DC
Output Type	Transistor
Voltage - Output (Max)	80V
Current - Output / Channel	50mA
Voltage - Forward (Vf) (Typ)	1.2V
Current - DC Forward (If) (Max)	50 mA
Vce Saturation (Max)	400mV
Operating Temperature	-55°C ~ 110°C
Mounting Type	Surface Mount
Package	4-SOIC (0.173", 4.40mm Width)
Supplier Device Package	4-SOP
Packaging	Tube

개요

Description

FODM217A is a photomos/optical isolator (photocoupler) used to provide galvanic isolation between input and output. It typically contains an infrared LED on the input side and MOSFET output on the other side, so driving the LED turns the output MOSFETs on and completes a load circuit without a direct electrical connection.
Key points:
- Single-channel, solid-state relay style device
- LED input drives a MOSFET output for isolated switching
- No mechanical contacts, good for long life and high-frequency switching
- Suitable for switching AC/DC loads depending on the output configuration
- Commonly used for isolated signal interfaces, microcontroller protection, measurement equipment, and power-supply control
For exact electrical specs (IF, VDS, RON, leakage, isolation voltage, switching times, and package type), refer to the datasheet for the specific FODM217A revision.

Package

FODM217A uses an 8-pin package: DIP-8 (through-hole). It is also available in an 8-pin SO-8 surface-mount version.

Pinout

FODM217A is an 8-pin device (DIP-8/SO-8) and is a 1-channel optocoupler with a MOSFET output. The input is an LED; the output is two MOSFETs connected back-to-back to provide isolated, bidirectional switching suitable for solid-state relay-style applications.

Manufacturer

Manufacturer: Fairchild Semiconductor (now part of ON Semiconductor).
What kind of company: A global semiconductor company that designs, manufactures, and markets integrated circuits, discrete semiconductors, and optoelectronic devices.

Application

FODM217A is a dual MOSFET optocoupler (Photomos) for galvanic isolation with load switching. Typical applications:
- Isolated switching of DC/low-voltage AC loads (relay replacement)
- Gate-drive isolation for power MOSFETs/IGBTs
- Isolated signal interfaces in industrial automation and instrumentation
- Power supplies and telecom equipment needing control/load-side isolation
- Safety-critical medical devices and consumer electronics requiring galvanic isolation