이미지는 참조용만

FT24C64A-ESR-T

Name: FT24C64A-ESR-T
Rating: 4.7 (12 reviews)

IC EEPROM 64KBIT I2C 800KHZ 8SOP

제조업체
Mfr.부분 #FT24C64A-ESR-T
패키지 8-SOIC (0.154, 3.90mm Width)
데이터시트
재고 있음2152

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package	Tape & Reel (TR),Cut Tape (CT)
ProductStatus	Active
MemoryType	Non-Volatile
MemoryFormat	EEPROM
Technology	EEPROM
MemorySize	64Kb (8K x 8)
MemoryInterface	I²C
ClockFrequency	800 kHz
WriteCycleTime-WordPage	5ms
AccessTime	1.2 µs
Voltage-Supply	1.8V ~ 5.5V
OperatingTemperature	-40°C ~ 85°C
MountingType	Surface Mount
Package/Case	8-SOIC (0.154, 3.90mm Width)

개요

Description

FT24C64A-ESR-T is a 64-kbit I2C serial EEPROM (8K x 8) used for nonvolatile storage in microcontroller projects. Key points:
- Interface: I2C two-wire bus; device address 1010xxx with A0–A2 selecting the specific device.
- Memory: 8,192 bytes accessible via a two-byte memory address field (MSB, LSB).
- Operations: Random reads and sequential reads; write operations are page-oriented (typical page size: 32 bytes).
- Performance: Typical write cycle around a few milliseconds (e.g., ~4–5 ms); low-power standby; data retention of many years.
- Voltage and temp: Operates over a wide supply range (commonly 2.7–5.5 V); temperature grades vary by part.
- Packaging: -T usually denotes tape-and-reel packaging; device comes in a standard 8-pin package (SOIC/Mini-DIP variants).
Common uses: microcontroller parameter storage, configuration data, calibration tables, and data logging where nonvolatile memory is needed. For exact electrical specs, timings, and pinout, consult the specific FT24C64A-ESR-T datasheet.

Features

Here are the typical features of FT24C64A-ESR-T (64Kbit I2C serial EEPROM, extended-temp variant):
- Memory: 64 Kbit (8 KBytes) organized as 8K × 8
- Interface: I2C two-wire bus; standard mode up to 100 kHz, fast mode up to 400 kHz
- Addressing: two-byte memory addressing (MSB/LSB) to access full memory
- Page size: 32-byte page write
- Write: random and sequential read; write cycle time ≈ 5 ms (typical)
- Endurance/Retention: ~1,000,000 write cycles; data retention ~100 years
- Hardware addressing: A2–A0 pins for up to 8 devices on one bus
- Write protection: WP pin to lock memory or sectors
- Supply voltage: typically 2.5–5.5 V
- Operating temperature: -40°C to +85°C (industrial/extended temp)
- Package: 8-pin package (ESR variant, RoHS compliant)
Note: please consult the official datasheet for exact electrical specs and any variant-specific nuances.

Package

8-pin SOP (SOIC) package; the -T suffix indicates tape-and-reel packaging.

Pinout

- Pin count: 8 pins
- Function: 64-kbit I2C serial EEPROM (8K × 8). Uses I2C with 2-byte addressing; has A0–A2 hardware address pins, WP write-protect pin, plus VCC and GND. Typical pinout: 1=A0, 2=A1, 3=A2, 4=GND, 5=SDA, 6=SCL, 7=WP, 8=VCC.

Manufacturer

Manufacturer: Faraday Technology Corporation (FTC).
What kind of company: A Taiwan-based fabless semiconductor company that designs and licenses integrated circuits and SoC/IP blocks (does not own a silicon fabrication foundry).

Application

FT24C64A-ESR-T is a 64K-bit I2C EEPROM. Typical applications include:
- Non-volatile storage for MCU parameters, configuration data, and calibration constants
- Small data logging (events, counters, usage history)
- Device identity (serial numbers, asset tracking)
- Boot/configuration parameters or parameter tables
- Embedded systems in consumer electronics, automotive/industrial controllers, meters, and medical devices

Equivalent

FT24C64A-ESR-T is a 64Kbit I2C serial EEPROM. Equivalents (pin-compatible, 8-pin) include:
- AT24C64A (Atmel/Microchip)
- 24LC64 / 24AA64 (Microchip)
- M24C64-W (STMicroelectronics)
- CAT24C64 / CAT24C64D (ON Semiconductor)
- FM24C64A (Fudan Microelectronics)
These share the same 2-wire I2C interface and 64Kbit capacity.