이미지는 참조용만

GD25B64CSIGR

Name: GD25B64CSIGR
Rating: 4.7 (12 reviews)

IC FLASH 64MBIT SPI/QUAD 8SOP

제조업체
Mfr.부분 #GD25B64CSIGR
패키지
데이터시트
재고 있음17047

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Series	GD25B
Part Status	Active
Memory Type	Non-Volatile
Memory Format	FLASH
Technology	FLASH - NOR (SLC)
Memory Size	64Mbit
Memory Organization	8M x 8
Memory Interface	SPI - Quad I/O
Clock Frequency	120 MHz
Write Cycle Time - Word, Page	50µs, 2.4ms
Voltage - Supply	2.7V ~ 3.6V
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Package	8-SOIC (0.209", 5.30mm Width)
Supplier Device Package	8-SOP
Packaging	Tape & Reel (TR)
Access Time	7 ns

개요

Description

GD25B64CSIGR is a GigaDevice 64-Mbit serial NOR flash memory with an SPI interface. It’s used to store firmware, configuration, or data in embedded systems and can be embedded alongside microcontrollers or processors.
Key points:
- Density: 64 Mbit (8 MBytes)
- Interface: standard SPI (single I/O); clock up to ~104 MHz; modes 0–3
- Supply: 2.7–3.6 V
- Package: 8-pin SOP (SIGR denotes RoHS-compliant package)
- Memory organization: 256-byte page size; 4 KB sectors; 64 KB blocks; full-chip erase
- Operations: Read, Fast Read; Page Program (up to 256 bytes); Write Enable/Disable; sector/block/chip erase
- Features: Write protection, status registers (WIP/WEL), Deep power-down, typical low-power operation
- Applications: bootloaders, firmware storage, configuration data, nonvolatile code storage
Note: exact features/speeds may vary by revision. For precise electrical characteristics and timing, consult the latest datasheet.

Features

Here are concise features of GD25B64CSIGR:
- 64 Mbit (8 MB) serial flash memory
- SPI-compatible serial interface (3-byte address; standard read/fast read)
- Supply voltage: 2.7V–3.6V
- Clock speed: up to about 104 MHz for fast read
- Page program: up to 256 bytes per write
- Memory organization: 4 KB erase sectors; 32 KB and 64 KB blocks; full-chip erase
- Endurance: typically 100,000 erase cycles per sector
- Data retention: ~20 years
- Power modes: Deep Power-Down and low-power standby
- Operating temperature: -40°C to +85°C
- Package: 8-pin SOP (GD25B64CSIGR)
- Security/protection: hardware write protection (WP#), status register protection bits
- Standard manufacturer features: status/config registers, basic erase/program commands
Note: Non-volatile, single‑die SPI flash suitable for code and data storage in embedded systems.

Package

8-pin SOP (SOIC-8) package.

Pinout

- Pin count: 8 pins (8-pin SOP/SOIC).
- Function: 64-Mbit serial SPI flash memory (GD25B64C) with standard SPI interface: CS, CLK, DI (MOSI), DO (MISO), WP#, HOLD#, VCC, and VSS. Used for nonvolatile code/data storage.

Manufacturer

- Manufacturer: GigaDevice Semiconductor Inc. (GigaDevice)
- What kind of company: A Beijing-based fabless semiconductor company that designs and sells flash memory (SPI NOR/NAND) and microcontroller products, i.e., non-volatile memory and MCU solutions.

Application

GD25B64CSIGR is a 64-Mbit SPI flash memory. Applications:
- External program memory for microcontrollers/SoCs (XIP or boot code)
- Firmware updates and storage in embedded/IoT devices
- Data logging and non-volatile storage of configuration/calibration data
- General-purpose non-volatile storage in consumer electronics, industrial, and automotive electronics

Equivalent

Equivalent parts for GD25B64CSIGR (64‑Mbit SPI NOR Flash, 3.3V SOP‑8):
- Winbond W25Q64FV / W25Q64JV
- Macronix MX25L64F
- ISSI IS25LP064A
- Spansion S25FL064P (S25FL064K)
- Micron N25Q064A
Note: check exact voltage, timing, and package in datasheets; cross‑references can vary by supplier.