이미지는 참조용만

GD25Q16CTIG

Name: GD25Q16CTIG
Rating: 4.7 (12 reviews)

IC FLASH 16MBIT SPI/QUAD 8SOP

제조업체
Mfr.부분 #GD25Q16CTIG
패키지 8-SOIC (0.154, 3.90mm Width)
데이터시트
재고 있음6940

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package	Tube
ProductStatus	Not For New Designs
MemoryType	Non-Volatile
MemoryFormat	FLASH
Technology	FLASH - NOR
MemorySize	16Mb (2M x 8)
MemoryInterface	SPI - Quad I/O
ClockFrequency	120 MHz
WriteCycleTime-WordPage	50µs, 2.4ms
Voltage-Supply	2.7V ~ 3.6V
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	8-SOIC (0.154, 3.90mm Width)

개요

Description

The GD25Q16CTIG is a 16 Mb (megabit) serial NOR flash memory chip manufactured by GigaDevice. It utilizes the SPI (Serial Peripheral Interface) protocol for communication, making it suitable for various embedded applications. The device operates at a voltage range of 2.7V to 3.6V and supports high-speed data transfer rates, enabling efficient read and write operations.
With a dual and quad output capability, the GD25Q16CTIG can significantly enhance performance, particularly in applications requiring fast data access. It features various modes, including Quad SPI mode, which allows for faster data throughput compared to standard SPI.
This flash memory is widely used in automotive, consumer electronics, and industrial applications for firmware storage, data logging, and code execution. Its small footprint and low power consumption make it ideal for space-constrained designs.
In summary, the GD25Q16CTIG is a versatile and high-performance flash memory solution suitable for a range of modern electronic devices.

Features

The GD25Q16CTIG is a 16Mb (2MB) Serial NOR Flash memory chip. Key features include:
1. Interface: Supports SPI (Serial Peripheral Interface) with standard, dual, and quad modes for high-speed data transfer.
2. Operating Voltage: Operates typically at 3V (2.7V to 3.6V) with a low power consumption mode.
3. Speed: Offers a maximum clock frequency of up to 104 MHz in Quad SPI mode.
4. Endurance: Provides a write/erase cycle endurance of over 100,000 cycles.
5. Data Retention: Ensures data retention for up to 20 years.
6. Form Factor: Available in various packages, including SOIC (8-pin) and WSON (8-lead), suitable for different applications.
7. Memory Organization: Organized as 2048 pages of 256 bytes each, allowing for efficient data access and management.
8. Security Features: Includes a unique ID and a protection feature for critical areas of memory.
Ideal for applications in consumer electronics, automotive, and industrial devices, this chip is known for its reliability and performance.

Package

The GD25Q16CTIG is typically offered in a SOIC-8 package type. This surface-mount package features eight pins and is commonly used for flash memory applications.

Pinout

The GD25Q16CTIG is a 16M-bit (2MB) Serial NOR Flash memory chip. It features a total of 8 pins. The functions of these pins are as follows:
1. CS# (Chip Select): Active low signal to select the device.
2. SO (Serial Output): Data output pin for sending data to the host.
3. SI (Serial Input): Data input pin for receiving data from the host.
4. SCK (Serial Clock): Clock signal for synchronous data transfer.
5. WP# (Write Protect): Active low signal to enable or disable write protection.
6. RESET#: Active low pin for resetting the device.
7. VCC: Power supply pin (typically 2.7V to 3.6V).
8. GND: Ground pin.
This chip supports various SPI modes and commands for reading, writing, and erasing memory. Its compact design and interface make it suitable for a range of applications in embedded systems.

Manufacturer

The GD25Q16CTIG is manufactured by GigaDevice Semiconductor Inc., a company that specializes in the design and production of flash memory products, including NOR flash and SRAM. Founded in 2005, GigaDevice is based in Beijing, China, and focuses on providing high-performance memory solutions for various applications, including consumer electronics, automotive, and industrial sectors. The company plays a significant role in the semiconductor industry, offering a range of products that cater to the growing demand for memory in modern electronic devices.

Application

The GD25Q16CTIG is a 16 Mb SPI NOR flash memory chip commonly used in embedded systems, consumer electronics, and IoT devices. Its application areas include firmware storage, code execution in microcontrollers, data logging, and configuration storage in devices like automotive systems, industrial equipment, and smart appliances. Its high-speed performance and reliability make it suitable for applications requiring quick read and write capabilities.

Equivalent

The GD25Q16CTIG chip, a 16Mb (2MB) serial NOR Flash memory, has several equivalent products. Notable alternatives include the Winbond W25Q16JV, Micron MT25QL16, and Spansion S25FL116K. Ensure compatibility by checking specifications such as voltage, pin configuration, and read/write speeds before substitution.