이미지는 참조용만

GD25Q40EEIGR

Name: GD25Q40EEIGR
Rating: 4.7 (12 reviews)

IC FLASH 4MBIT SPI/QUAD 8USON

제조업체
Mfr.부분 #GD25Q40EEIGR
패키지
데이터시트
재고 있음13003

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Series	GD25Q
Part Status	Active
Base Product Number	GD25Q40
Memory Type	Non-Volatile
Memory Format	FLASH
Technology	FLASH - NOR (SLC)
Memory Size	4Mbit
Memory Organization	512K x 8
Memory Interface	SPI - Quad I/O
Clock Frequency	133 MHz
Write Cycle Time - Word, Page	70µs, 2ms
Voltage - Supply	2.7V ~ 3.6V
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Package	8-XFDFN Exposed Pad
Supplier Device Package	8-USON (3x2)
Packaging	Cut Tape (CT), Tape & Reel (TR)
Access Time	7 ns

개요

Description

GD25Q40EEIGR is a Gigadevice 4 Mbit serial flash memory (GD25Q40E family). It uses a standard SPI-compatible interface to store firmware and data for embedded systems. Key features:
- Capacity: 4 Mbit (512 KB)
- Package: 8-pin, RoHS-compliant (likely SOP8)
- Supply: typically 2.7–3.6 V
- Performance: fast read up to around 104 MHz; supports standard SPI read, page program (256 bytes), and sector/block erases (4 KB, 32 KB, 64 KB) plus chip erase
- Operations: write enable/disable, status register with write protection, power-down/deep power-down modes
- Compatibility: JEDEC-compatible IDs; optional dual/quad I/O modes on some variants
Uses: boot code storage, firmware updates, and data storage in microcontroller and embedded designs. For exact timing, voltage, temperature range, and packaging details, consult the official datasheet.

Features

Here are the typical features of GD25Q40EEIGR:
- 4 megabit (512 KB) serial flash memory
- SPI interface (SI, SO, SCK, CS) in an 8-pin package
- 3-byte addressing (no 4-byte address needed)
- Fast Read up to ~104 MHz
- Page program: up to 256 bytes
- Erase granularity: 4 KB sectors; 32 KB and 64 KB blocks; Chip erase option
- Power-down mode with fast wake-up
- Hardware protection: block/sector protection; WP# and HOLD# pins
- Endurance: typical around 100,000 P/E cycles; data retention ~years
- Supply voltage: 2.7–3.6 V
- Operating temp ranges available (industrial grade options, e.g., -40°C to 85°C)
- RoHS-compliant,GD25Q40E family in an 8-pin SOP (IGR) package
Notes:
- Specifics (e.g., exact voltage/ temp ranges, endurance) may vary by lot/grade; always refer to the latest datasheet for exact figures.

Package

The GD25Q40EEIGR comes in an 8-pin SOP (SOIC-8) package (lead-free/RoHS compliant).

Pinout

- Pin count: 8 pins (SOP-8).
- Function: 4 Mbit serial SPI flash memory (GD25Q40E family). Used to store code/data; supports standard SPI and Dual/Quad I/O modes. Pinout typically: CS, CLK, DI (MOSI), DO (MISO), WP#, HOLD#, VCC, GND. Common operations include Read, Fast Read, Page Program, Sector/Evac/Erase commands, and Chip Erase.

Manufacturer

- Manufacturer: GigaDevice Semiconductor Inc. (GD).
- What kind of company: A Chinese fabless semiconductor company that designs and markets flash memory (NOR/NAND) and microcontroller products, headquartered in Beijing.

Application

GD25Q40EEIGR is a 4-Mbit SPI serial flash. Common applications:
- External firmware/code storage for microcontrollers and SoCs
- Boot memory and firmware update/rollback
- Non-volatile storage for configuration data, calibration data, and logs (IoT/embedded)
- Storage for consumer electronics (routers, set-top boxes, printers, wearables)
- Non-volatile storage in automotive and industrial control units

Equivalent

Equivalents (4Mbit SPI NOR Flash, 2.7–3.6V, 8‑pin):
- Winbond W25Q40BV
- Macronix MX25L4006E
- ISSI IS25LP040D
- Cypress/S25FL004A
- Micron N25Q040A
- Adesto AT25SF040
Note: these are functionally similar drop-ins; verify exact pinout, timing, JEDEC IDs, and WP/BP/VPP pins for your board.