이미지는 참조용만
GD25Q40ETIGR
NOR Flash
- 제조업체
- Mfr.부분 #GD25Q40ETIGR
- 패키지
- 데이터시트
- 재고 있음7209
100% 원래 &새로운
배송 준비 24 시간
365 일 보장
RFQ 및더 많은 할인
사양
| Packaging | Cut Tape |
| Standard Pack Qty | 3000 |
개요
Description
The GD25Q40ETIGR is a 4Mb (512KB x 8) Serial NOR Flash memory chip produced by GigaDevice. It uses a standard SPI (Serial Peripheral Interface) protocol, providing fast data transfer rates up to 104MHz. The device supports various modes including Dual I/O and Quad I/O, enhancing performance for high-speed applications.
The GD25Q40ETIGR features a 3.3V power supply and offers several features such as sector and block erase, page programming, and an advanced security mechanism including 64-bit unique ID and write protection. It operates effectively in a wide temperature range, making it suitable for automotive, industrial, and consumer electronics applications.
Additionally, the chip is packaged in a compact 8-pin SOIC, facilitating easy integration into various circuit designs. Its reliable performance and flexibility make the GD25Q40ETIGR a popular choice for embedded systems, firmware storage, and data logging applications.
The GD25Q40ETIGR features a 3.3V power supply and offers several features such as sector and block erase, page programming, and an advanced security mechanism including 64-bit unique ID and write protection. It operates effectively in a wide temperature range, making it suitable for automotive, industrial, and consumer electronics applications.
Additionally, the chip is packaged in a compact 8-pin SOIC, facilitating easy integration into various circuit designs. Its reliable performance and flexibility make the GD25Q40ETIGR a popular choice for embedded systems, firmware storage, and data logging applications.
Features
The GD25Q40ETIGR is a 4Mb (512KB x 8) serial NOR Flash memory manufactured by GigaDevice. Key features include:
1. Interface: Supports Quad SPI (QSPI), Dual-SPI, and Standard SPI, providing high-speed data transfer.
2. Voltage Range: Operates with a supply voltage of 2.7V to 3.6V.
3. Data Rate: Offers a high-speed clock frequency of up to 104MHz in Quad SPI mode.
4. Uniform Sector Architecture: Contains 64 sectors of 64KB each, allowing for flexible data storage management.
5. Erase/Programming: Features fast page programming and sector erase capabilities, enhancing efficiency.
6. Low Power Consumption: Designed for low-power applications, making it suitable for battery-operated devices.
7. Temperature Range: Available in industrial (-40°C to 85°C) and commercial (0°C to 70°C) temperature ranges.
8. Packages: Offered in various package types, including SOP-8 and WSON-8, for versatile integration into designs.
This makes it ideal for applications in consumer electronics, automotive, and industrial devices where reliable non-volatile storage is required.
1. Interface: Supports Quad SPI (QSPI), Dual-SPI, and Standard SPI, providing high-speed data transfer.
2. Voltage Range: Operates with a supply voltage of 2.7V to 3.6V.
3. Data Rate: Offers a high-speed clock frequency of up to 104MHz in Quad SPI mode.
4. Uniform Sector Architecture: Contains 64 sectors of 64KB each, allowing for flexible data storage management.
5. Erase/Programming: Features fast page programming and sector erase capabilities, enhancing efficiency.
6. Low Power Consumption: Designed for low-power applications, making it suitable for battery-operated devices.
7. Temperature Range: Available in industrial (-40°C to 85°C) and commercial (0°C to 70°C) temperature ranges.
8. Packages: Offered in various package types, including SOP-8 and WSON-8, for versatile integration into designs.
This makes it ideal for applications in consumer electronics, automotive, and industrial devices where reliable non-volatile storage is required.
Package
The GD25Q40ETIGR is packaged in a SOIC-8 (Small Outline Integrated Circuit, 8 leads) format.
Pinout
The GD25Q40ETIGR is a 4Mb (512KB x 8) serial NOR flash memory chip manufactured by GigaDevice. It features a total of 8 pins in a SOIC-8 package.
### Pin Functions:
1. CS# (Chip Select): Active low signal to enable the chip.
2. SO (Serial Output): Data output pin for reading data.
3. W# (Write Protect): Active low signal to protect the memory from accidental writes.
4. SI (Serial Input): Data input pin for sending commands and data to the chip.
5. SCK (Serial Clock): Clock signal for synchronizing data transfer.
6. HOLD#: Active low signal used to pause the current operation without resetting it.
7. VCC: Power supply pin.
8. GND: Ground pin.
This chip supports various operations, including reading, writing, and erasing, through a Serial Peripheral Interface (SPI).
### Pin Functions:
1. CS# (Chip Select): Active low signal to enable the chip.
2. SO (Serial Output): Data output pin for reading data.
3. W# (Write Protect): Active low signal to protect the memory from accidental writes.
4. SI (Serial Input): Data input pin for sending commands and data to the chip.
5. SCK (Serial Clock): Clock signal for synchronizing data transfer.
6. HOLD#: Active low signal used to pause the current operation without resetting it.
7. VCC: Power supply pin.
8. GND: Ground pin.
This chip supports various operations, including reading, writing, and erasing, through a Serial Peripheral Interface (SPI).
Manufacturer
The GD25Q40ETIGR is manufactured by Winbond Electronics Corporation. Winbond is a Taiwanese company specializing in semiconductor products, particularly memory solutions. They produce a range of memory devices, including NOR Flash, DRAM, and other related products used in various applications such as consumer electronics, automotive, and industrial sectors. Established in 1987, Winbond has grown to be a significant player in the memory chip market, known for its innovative technologies and commitment to quality.
Application
The GD25Q40ETIGR is a 4Mb Flash memory chip commonly used in embedded systems, consumer electronics, and Internet of Things (IoT) devices. Its application areas include firmware storage, code execution, data logging, and configuration settings in products like smart appliances, automotive systems, and industrial automation equipment. Its high-speed performance and reliability make it suitable for applications requiring quick data access and persistent storage.
Equivalent
The GD25Q40ETIGR is a 4Mb SPI NOR Flash memory. Equivalent products include:
1. Winbond W25Q40FW - Similar specifications and pinout.
2. Micron MT25QL040 - Offers similar performance and memory capacity.
3. Adesto Technologies AT25DF041 - Comparable in features and functionality.
Always verify specific datasheets for detailed compatibility and any potential differences in programming or electrical characteristics.
1. Winbond W25Q40FW - Similar specifications and pinout.
2. Micron MT25QL040 - Offers similar performance and memory capacity.
3. Adesto Technologies AT25DF041 - Comparable in features and functionality.
Always verify specific datasheets for detailed compatibility and any potential differences in programming or electrical characteristics.
배송
배송 방법We
DHL, FedEx, TNT, UPS 또는 선택한 다른 운송업체를 통해 글로벌 배송 서비스를 제공합니다.
배송 요금 참조 (DHL/FedEx):
DHL은: 배송 비용은 $25-$45 (0.5kg)에서 2-5 영업일의 추정적 배달 시간이 있습니다.
FedEx는: 배송 비용은 $25-$40 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.
UPS는: 배송 비용은 $25-$45 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.
TNT는: 배송 비용은 $25-$65 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.
EMS는: 배송 비용은 $30-$50 (0.5kg)에서 7-15 영업일의 추정적 배달 시간을 제공합니다.
등록된 항공우편: 배송 비용은 $2-$4 (0.1kg), 예상 배달 시간 5-20 영업일.
지불
Payment Methods
지불 기간은 100% 사전 지불입니다.
현재, 우리는 아래 지불 방법만 받아들입니다.:
1. PayPal
2. 신용/직불 카드
3. 전선 전송
비슷한
-
MX25R8035FM1IL0
Macronix
-
MX25L3233FZBI-08Q
Macronix
-
MX29F400CBTI-70G
Macronix
-
MX25V4035FZUI
Macronix
-
MX25V16066M1I02
Macronix
-
MX25L8035EM2I-10G
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25U51279GXDR00
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25R1635FZUIH0
Macronix
-
MX25L6433FM2I-08G
Macronix