이미지는 참조용만

HCPL-0631#500

Name: HCPL-0631#500
Rating: 4.7 (12 reviews)

OPTOISO 3.75KV 2CH OPEN COLL 8SO

제조업체
Mfr.부분 #HCPL-0631#500
패키지
데이터시트
재고 있음7592

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Part Status	Active
Base Product Number	HCPL-0631
Number of Channels	2
Inputs - Side 1/Side 2	2/0
Voltage - Isolation	3750Vrms
Common Mode Transient Immunity (Min)	10kV/µs
Input Type	DC
Output Type	Open Collector, Schottky Clamped
Current - Output / Channel	50 mA
Data Rate	10MBd
Propagation Delay tpLH / tpHL (Max)	100ns, 100ns
Rise / Fall Time (Typ)	24ns, 10ns
Voltage - Forward (Vf) (Typ)	1.5V
Current - DC Forward (If) (Max)	15mA
Voltage - Supply	4.5V ~ 5.5V
Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount
Package	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package	8-SO Tall
Packaging	Tape & Reel (TR)

개요

Description

HCPL-0631 is a high-speed optocoupler from Broadcom/Avago that provides electrical isolation between input and output for digital signals. It contains an infrared LED input and a photodetector with on-chip amplification and a TTL/CMOS-compatible output transistor. Typical isolation is around 5 kV rms. It is designed for faster performance than standard optocouplers and supports data rates in the Mbps range (varies by version) with fast propagation delay. The input LED requires a modest drive current (sense with a current-limiting resistor); the output side is powered separately (commonly 3.3 V or 5 V) and may use a pull-up if the output is open-collector. Applications include microcontroller I/O isolation, PLCs, industrial control, motor drives, and power-supply interfaces. The “#500” suffix is typically a batch/variant code for a specific lot or distributor—check the latest datasheet for exact CTR, propagation delay, CMR, and operating conditions for your part.

Features

Key features of HCPL-0631 (high‑speed optocoupler with logic output):
- 5 kV rms input–output isolation
- 25 kV/µs minimum common‑mode transient immunity
- TTL/CMOS‑compatible logic output (totem‑pole)
- Data rate up to 2.5 Mbps
- 8‑pin DIP or SO‑8 package (industrial variants available)
- Operating temperature range: -40°C to +85°C
- RoHS/compliant; suitable for isolated logic I/O to microprocessors
- Suitable for fast, reliable digital signal isolation in controllers and interfaces
(Applications: microprocessor I/O isolation, digital signal isolation, high‑speed gating with isolation.)

Package

An 8-pin DIP (through-hole) package.

Pinout

- Pin count: 8 pins (DIP package).
- Function: One-channel high-speed optocoupler with TTL/CMOS-compatible output; provides galvanic isolation between the input LED (input side) and the output logic (output side, which requires Vcc and GND). The #500 suffix indicates the specific package/reel variant.

Manufacturer

Manufacturer: Broadcom Inc. (formerly Avago Technologies).
Broadcom is a multinational semiconductor company that designs and manufactures semiconductor devices and related technologies (and, more broadly, infrastructure software).

Application

HCPL-0631#500 is a high-speed optically isolated amplifier with 5 kV rms isolation. Applications:
- Isolated data paths between microcontrollers/DSPs and high-voltage/noisy power electronics
- Industrial automation, PLCs, and motor drives (inverters, servo controllers, SMPS)
- Isolated sensor front-ends for current/voltage, data acquisition, instrumentation
- Test and measurement equipment
- Medical instrumentation requiring electrical safety isolation

Equivalent

Equivalent parts (same device family, different prefix/packaging):
- ACPL-0631
- ACPL-0630
- HCPL-0630
- HCPL-0632
Note: 6N137 is a common TTL-output optocoupler used as a functional substitute, but it is not pin-for-pin or speed-equivalent.