ICM-20608D

이미지는 참조용만

ICM-20608D

MOTION TRACKING DEVICE

  • 제조업체
  • Mfr.부분 #ICM-20608D
  • 패키지
  • 데이터시트
  • 재고 있음11078

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Part Status Obsolete
Packaging Bulk

개요

Description

ICM-20608D is a 6‑axis MEMS IMU from InvenSense (now part of TDK). It combines a 3‑axis accelerometer and a 3‑axis gyroscope with an on‑chip digital motion processor (DMP) for on‑board sensor fusion.
Key points:
- Interfaces: I2C or SPI
- Output: high data rates (up to ~1 kHz) with FIFO buffering
- Full-scale ranges: accelerometer typically ±2/4/8/16 g; gyroscope ±125/250/500/1000/2000 dps
- Power modes: configurable for low power
- Extras: temperature sensor, self‑test, interrupt outputs
- Applications: drones, robotics, wearables, motion sensing in devices
Note: exact pinout, register map, and DMP options vary by revision; consult the official datasheet and reference software for implementation details.

Features

Key features of the ICM-20608D:
- 6‑axis IMU: 3‑axis accelerometer + 3‑axis gyroscope.
- 16‑bit sensor data with programmable full scales: accelerometer ±2/4/8/16 g; gyroscope ±125/250/500/1000/2000 dps.
- High ODR with configurable digital filtering (up to 1 kHz data rate; configurable LPF).
- On‑chip temperature sensor for bias/temperature compensation.
- FIFO buffer and multiple interrupt options (data ready, FIFO watermark, etc.) for efficient data handling.
- Flexible serial interfaces: I2C and SPI (standard voltage compatibility).
- Low-power operation with sleep and accelerometer‑only modes.
- Self‑test and factory calibration for drift reduction.
- Small form factor (LGA package) and wide operating conditions: −40 °C to 85 °C.

Package

ICM-20608D is packaged in a 3×3 mm QFN (24-pin) package.

Pinout

ICM-20608D pin count: 28-pin LGA package.
Main pin functions (grouped):
- Power/grounds: AVDD, DVDD, VIO/VLOGIC (IO), multiple GND pins.
- Clock: XIN/XOUT (or EXT_CLK) for oscillator.
- Interface (digital I/O): I2C: SCL, SDA; SPI: SCK, MOSI, MISO, CS (NCS).
- Interrupt/status: INT, FSYNC, DRDY (data-ready).
- Address/select: AD0/AD1 (optional configurable I2C address).
- Other/pad pins: NC or reserved as per datasheet.
Note: exact pin mapping and available signals can vary by package variant; please consult the official datasheet for the precise pinout.

Manufacturer

- Manufacturer: InvenSense (a MEMS motion-sensor company; now a subsidiary of TDK Corporation).
- What kind of company: A global MEMS sensors designer/manufacturer specializing in inertial measurement units (accelerometers and gyroscopes) for smartphones, wearables, drones, automotive, and other electronics.

Application

ICM-20608D is a 6‑axis MEMS IMU (3‑axis accel + 3‑axis gyro). Key applications include:
- Mobile devices and wearables (motion sensing, gesture/UI)
- Gaming controllers and peripherals
- Drones and robotics (attitude estimation, stabilization)
- IoT and smart devices (gesture recognition, activity monitoring)
- Industrial monitoring (vibration, tilt, motion sensing)

Equivalent

Equivalent 6-axis IMUs (accelerometer + gyroscope, I2C/SPI):
- InvenSense ICM-20602
- MPU-6050 / MPU-6500 (InvenSense)
- Bosch BMI160
- STMicroelectronics LSM6DS3
Note: not pin-compatible; check interface, full-scale ranges, and power/performance specs to ensure suitability.

배송

배송 방법We

DHL, FedEx, TNT, UPS 또는 선택한 다른 운송업체를 통해 글로벌 배송 서비스를 제공합니다.


배송 요금 참조 (DHL/FedEx):

DHL은: 배송 비용은 $25-$45 (0.5kg)에서 2-5 영업일의 추정적 배달 시간이 있습니다.

FedEx는: 배송 비용은 $25-$40 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

UPS는: 배송 비용은 $25-$45 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

TNT는: 배송 비용은 $25-$65 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

EMS는: 배송 비용은 $30-$50 (0.5kg)에서 7-15 영업일의 추정적 배달 시간을 제공합니다.

등록된 항공우편: 배송 비용은 $2-$4 (0.1kg), 예상 배달 시간 5-20 영업일.

지불

Payment Methods

지불 기간은 100% 사전 지불입니다.

현재, 우리는 아래 지불 방법만 받아들입니다.:

1. PayPal

2. 신용/직불 카드

3. 전선 전송

비슷한