이미지는 참조용만

ICM7555ESA+T

Name: ICM7555ESA+T
Rating: 4.7 (12 reviews)

IC OSC SGL TIMER 500KHZ 8-SOIC

제조업체
Mfr.부분 #ICM7555ESA+T
패키지 8-SOIC (0.154, 3.90mm Width)
데이터시트
재고 있음9649

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Supplier	Analog Devices Inc./Maxim Integrated
Package	Tape & Reel (TR)
ProductStatus	Obsolete
Type	555 Type, Timer/Oscillator (Single)
Frequency	500kHz
Voltage-Supply	2V ~ 16.5V
Current-Supply	30 µA
OperatingTemperature	-40°C ~ 85°C
Package/Case	8-SOIC (0.154, 3.90mm Width)
SupplierDevicePackage	8-SOIC

개요

Description

ICM7555ESA+T is a dual retriggerable CMOS monostable multivibrator (two independent one-shot timers) from Intersil (Renesas). Each channel has its own trigger input and output; the output goes high for a duration set by an external resistor and capacitor. It is a low-power CMOS device with a broad supply range.
Key features
- Two independent, retriggerable timing channels
- Trigger inputs are active-low
- Timing determined by external RC network (pulse width ≈ RC timer)
- Low input current and RoHS-compliant
Common applications
- Pulse stretching and debouncing
- Fixed-width timing pulses and delay generation
- Edge detection and simple timing control in logic circuits
Packaging note
- ESA+T denotes the package code (8-pin) with tape-and-reel option. For exact supply range, timing equations, and pinout, consult the datasheet.

Features

Here are the key features of the ICM7555ESA+T (CMOS 7555 timer):
- 8-pin device, CMOS version of the 555 timer; pin-compatible with NE555
- Modes: astable and monostable operation
- Wide supply voltage: typically 3 V to 18 V
- Very low quiescent current (suitable for battery operation)
- High drive outputs suitable for logic interfacing (can source/sink significant current)
- Internal discharge transistor for timing network
- Trigger and threshold levels at 1/3 and 2/3 of Vcc (with reset input)
- Timing determined by external resistor and capacitor (supports large RC values)
- Improved temperature stability and lower drift vs. bipolar timers
- Packaging variants including 8-pin DIP/SOIC; Tape & Reel availability (ESA+T)
Ideal uses: low-power timers, oscillators, PWM, waveform generation, and delay circuits in battery-powered or space-constrained apps.

Package

An 8-pin surface-mount package (SOIC-8) with Tape & Reel packaging.

Pinout

- Pin count: 8 pins (DIP-8/SO-8 package).
- Function: ICM7555ESA+T is a CMOS timer IC (7555 family), used as a monostable/astable timer or oscillator (equivalent in function to the 555). Pins: 1 GND, 2 TRIG, 3 OUT, 4 RESET, 5 CTRL, 6 THR, 7 DIS, 8 VCC.

Manufacturer

- Manufacturer: Intersil (now part of Renesas Electronics Corporation).
- About the company: Renesas/Intersil is a semiconductor company that designs and manufactures analog, mixed-signal, and power integrated circuits for electronics.

Application

Applications of ICM7555ESA+T (CMOS 555 timer):
- Monostable and astable timer circuits using RC networks
- Delay generators and one-shot pulses (wake-up, sensor debouncing)
- PWM/duty-cycle control for LEDs and small motors
- RC oscillators and tone generators
- Clock generation and pulse shaping for microcontrollers
- Timer-based alarms and portable-device timing circuits

Equivalent

Equivalent cross-references to ICM7555ESA+T (CMOS 7555 timer):
- LMC555 (TI)
- TLC555 (TI)
- MCP555 (Microchip)
- NJM7555 (New Japan Radio)
Note: NE555 can substitute functionally (bipolar version, not CMOS). Check pinout and supply range in datasheets for exact compatibility.