이미지는 참조용만

IR2136

Name: IR2136
Rating: 4.7 (12 reviews)

IC GATE DRVR HALF-BRIDGE 28DIP

제조업체
Mfr.부분 #IR2136
패키지
데이터시트
재고 있음9489

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Part Status	Obsolete
Base Product Number	IR2136
DigiKey Programmable	Not Verified
Driven Configuration	Half-Bridge
Channel Type	3-Phase
Number of Drivers	6
Gate Type	IGBT, MOSFET (N-Channel)
Voltage - Supply	10V ~ 20V
Logic Voltage - VIL, VIH	0.8V, 3V
Current - Peak Output (Source, Sink)	200mA, 350mA
Input Type	Inverting
Rise / Fall Time (Typ)	125ns, 50ns
Operating Temperature	-40°C ~ 150°C (TJ)
Mounting Type	Through Hole
Package	28-DIP (0.600", 15.24mm)
Supplier Device Package	28-PDIP
Packaging	Tube
High Side Voltage - Max (Bootstrap)	600 V

개요

Description

IR2136 is a high-voltage, dual MOSFET gate driver for N-channel devices in a half-bridge (high-side and low-side) from International Rectifier (now Infineon). It drives HO (high-side gate) and LO (low-side gate) using a bootstrap-floating supply for the high-side (VB–VS) and a standard supply for the low-side (VCC). Typical applications: PWM motor drives, inverters, and switching power supplies.
Key features (typical): input/enable controls (e.g., IN and/or HIN/LIN with a shutdown option), undervoltage lockout on VCC and VB, shoot-through protection, and fast turn-off. The high-side supply is bootstrap-dependent and requires an external diode and capacitor. The high-side can withstand the bus voltage range, while the driver logic runs from VCC (usually 10–20 V).
Design notes: ensure proper bootstrap refresh by toggling the low-side, size the bootstrap cap for required peak current, and follow good PCB layout to minimize loop areas. If you want, I can add pinout specifics or a typical application circuit.

Features

IR2136 is a high-voltage, dual gate driver for N-channel MOSFETs in a half-bridge. Key features:
- Floating high-side driver up to VB–VS ≈ 600 V (bootstrap operation)
- Independent HO (high-side) and LO (low-side) outputs with totem-pole drive
- Bootstrap supply requires external diode and capacitor
- Gate-drive voltage typically 10–12 V; logic supply VCC 10–20 V
- UVLO protection on VCC and VB to prevent unsafe gate drive
- Input interface (e.g., IN and SD/Shutdown) with TTL/CMOS compatibility
- Fast switching with low propagation delay and crisp rise/fall times
- Wide operating temperature range (typical -40°C to +125°C) and robust packaging (8-pin SOIC/DIP)
Uses: offline switcher power supplies, motor-control half-bridges, and other high-voltage MOSFET driver applications.

Package

IR2136 comes in 8-pin packages: DIP-8 and SO-8 (surface-mount).

Pinout

- Pin count: 16-pin package (DIP16/SO16).
- Function: Dual high-side/low-side gate driver for a half-bridge. Provides HO and LO outputs to drive N-channel MOSFETs, with a bootstrap high-side supply (VB and VS) and a logic supply (VCC/VSS). Inputs are HIN and LIN (separate control), often with an enable/shutdown; includes UVLO and fault protections. Requires a bootstrap capacitor between VB and VS.

Manufacturer

Manufacturer: Infineon Technologies (the IR2136 originates from International Rectifier, now part of Infineon).
What kind of company: Infineon is a German multinational semiconductor company that designs and manufactures power management ICs, discrete semiconductors, and related electronics.

Application

IR2136 is a high-voltage dual-channel gate driver (bootstrap high-side, independent low-side) for two N-channel MOSFETs. Applications: driving half-bridge/topology stages in switch‑mode power supplies, LLC resonant converters, DC‑DC converters, motor drives (BLDC/induction), and full‑bridge inverters in solar inverters, UPS, PFC front ends, and other high‑voltage SMPS systems.

Equivalent

IR2136 is a dual high-side/low-side bootstrap gate driver for N-channel MOSFETs (HV). Direct substitutes from other vendors are generally other dual HV gate drivers. Common cross‑references include:
- TI: UCC27xx/UCC2xx series
- ST: L638x/L638xA series
- Onsemi: NCP8x2x/NCP8123x series
Note: exact pinout, voltage rating, drive strength, and features vary. For a precise drop‑in, match the voltage (e.g., up to 600 V), logic levels, and package; share your requirements for an exact substitute.