이미지는 참조용만

ISO1410BDW

Name: ISO1410BDW
Rating: 4.7 (12 reviews)

IC TRANSCEIVER HALF 1/1 16SOIC

제조업체
Mfr.부분 #ISO1410BDW
패키지 SOIC (DW)-16
데이터시트
재고 있음4026

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package	Tube
ProductStatus	Active
Type	Transceiver
Protocol	RS422, RS485
NumberofDrivers/Receivers	1/1
Duplex	Half
ReceiverHysteresis	30 mV
DataRate	500kbps
Voltage-Supply	1.71V ~ 1.89V, 2.25V ~ 5.5V
OperatingTemperature	-40°C ~ 125°C (TA)
MountingType	Surface Mount
Package/Case	16-SOIC (0.295, 7.50mm Width)

개요

Description

ISO 1410BDW refers to a specific standard or guideline related to a particular field, possibly in the context of international standards set by the International Organization for Standardization (ISO). However, as of my last update in October 2023, there is no widely recognized standard explicitly labeled "ISO 1410BDW." It's possible that it could relate to a niche application or a specific industry standard not broadly documented.
ISO standards typically provide frameworks for quality management, environmental practices, safety, and other operational protocols to ensure consistency and quality across different sectors. If you are looking for information on a specific standard or its applications, it would be best to consult official ISO publications or relevant industry documentation for more accurate and detailed information.

Features

The ISO1410BDW is a dual-channel operational amplifier designed for precision applications. Key features include:
1. Dual Channel: Provides two independent amplifiers in a single package, enhancing design flexibility.
2. Low Noise: Designed for minimal noise performance, making it suitable for sensitive applications.
3. Wide Supply Range: Operates with a broad supply voltage range, typically from ±2.5V to ±15V.
4. High Slew Rate: Offers a fast response to signal changes, improving performance in dynamic applications.
5. Low Input Offset Voltage: Ensures high accuracy in signal amplification.
6. Rail-to-Rail Output: Allows the output voltage to swing close to the supply rails, maximizing output range.
7. Low Power Consumption: Ideal for battery-operated devices, contributing to longer battery life.
These features make the ISO1410BDW suitable for various applications, including instrumentation, audio processing, and data acquisition systems.

Package

The ISO1410BDW is packaged in a TSSOP (Thin Shrink Small Outline Package) format, which typically features a thin, compact design suitable for surface mounting on printed circuit boards (PCBs). This package type allows for efficient space utilization in electronic designs.

Pinout

The ISO1410BDW is an isolation amplifier with a pin count of 8. Its primary function is to provide electrical isolation while amplifying analog signals, making it suitable for use in applications where safety and signal integrity are critical, such as in industrial and medical environments.
The pin configuration is as follows:
1. V-: Negative power supply
2. V+: Positive power supply
3. IN-: Negative input terminal
4. IN+: Positive input terminal
5. OUT: Output signal
6. COM: Common reference point
7. NC: Not connected (do not use)
8. NC: Not connected (do not use)
The device features high common-mode rejection and low offset voltage, allowing for precise signal transmission across its isolation barrier.

Manufacturer

The ISO1410BDW is manufactured by Texas Instruments, a leading American technology company specializing in semiconductor design and manufacturing. Founded in 1930, Texas Instruments (TI) is known for its innovation in analog and embedded processing products. The company serves a wide range of markets, including automotive, industrial, consumer electronics, and communications. TI is a crucial player in the semiconductor industry, providing components that power various devices and applications globally.

Application

ISO1410BDW is primarily used in industrial applications such as data acquisition, process control, and automation systems. It is often employed in environments requiring robust communication between devices, including manufacturing, transportation, and energy management. Its design enables reliable performance in harsh conditions, making it suitable for smart grid applications, remote monitoring, and telemetry systems.

Equivalent

The ISO1410BDW is an isolated data transceiver. Equivalent products include the ISO1042, ISO1041, and ISO7210. For specific applications, consider similar isolated transceivers from manufacturers like Texas Instruments, Analog Devices, or Analog Isolation. Always check the datasheets for compatibility in terms of voltage, current, and isolation ratings.