ISO1450BDWR

이미지는 참조용만

ISO1450BDWR

IC TRANSCEIVER HALF 1/1 16SOIC

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Part Status Active
Type Transceiver, Isolated
Protocol RS422, RS485
Number of Drivers/Receivers 1/1
Duplex Half
Receiver Hysteresis 30 mV
Data Rate 50Mbps
Voltage - Supply 1.71V ~ 1.89V, 2.25V ~ 5.5V, 3V ~ 5.5V
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295", 7.50mm Width)
Supplier Device Package 16-SOIC
Base Product Number ISO1450

개요

Description

ISO 1450BDWR is a standard that specifies requirements for the design, construction, and performance of devices and systems used in the electronic monitoring of water quality and quantity. It focuses on ensuring the reliability and accuracy of sensors and measurement systems that monitor various parameters, such as pH, turbidity, and chemical concentrations in water bodies. The standard aims to facilitate effective water management and compliance with environmental regulations by providing a framework for assessing the performance of these monitoring devices.
Key aspects include calibration procedures, quality control measures, and guidelines for data interpretation. Compliance with ISO 1450BDWR helps organizations ensure that their water quality monitoring systems meet industry benchmarks, contributing to sustainable water resource management and protecting public health and ecosystems.

Features

The ISO1450BDWR is a high-performance operational amplifier designed for precision applications. Key features include:
1. Low Offset Voltage: Minimizes errors in signal processing, enhancing accuracy.
2. Wide Supply Voltage Range: Operates efficiently with dual or single supply voltages.
3. High Gain Bandwidth Product: Supports high-frequency applications and signal amplification needs.
4. Low Noise: Reduces signal distortion and improves signal-to-noise ratio.
5. High Slew Rate: Allows for rapid response to input signal changes, making it suitable for fast applications.
6. Rail-to-Rail Output: Utilizes the full supply voltage range for output, maximizing signal swing.
7. Robust Performance: Features thermal stability and resistance to oscillation, ensuring reliable operation under various conditions.
These characteristics make the ISO1450BDWR suitable for a variety of applications, including audio processing, sensor interfaces, and instrumentation.

Package

The ISO1450BDWR is packaged in a 16-pin Wide Body SOIC (Small Outline Integrated Circuit) package.

Pinout

The ISO1450BDWR is a digital isolator with a total pin count of 16. Its primary function is to provide galvanic isolation between digital signals, ensuring signal integrity and protection against voltage spikes and ground loops in various applications, such as industrial control systems, medical devices, and communication interfaces.
Key features include high-speed data transmission capabilities, a wide supply voltage range, and low power consumption. The device facilitates isolation through capacitive coupling, allowing for bidirectional data communication while maintaining electrical isolation between the input and output sides.
For detailed pin functions, refer to the specific datasheet, as it outlines the individual pin assignments, including power supply, input, and output configurations.

Manufacturer

The manufacturer of the ISO1450BDWR is Texas Instruments (TI). Texas Instruments is an American technology company known for its development and manufacturing of semiconductors and various electronic components. Founded in 1930, TI operates in multiple sectors including analog, embedded processing, and digital signal processing, serving a wide range of industries such as automotive, industrial, and consumer electronics. The ISO1450BDWR specifically is an isolator used in applications that require signal isolation, offering features like high-speed data transmission and robustness against electrical noise.

Application

ISO1450BDWR is commonly used in various industrial applications requiring reliable communication in harsh environments. Key areas include smart grid systems, industrial automation, remote monitoring, and control systems. Its robust design allows for effective operation in adverse conditions, making it suitable for oil and gas, water treatment, and manufacturing industries. Additionally, it supports data integrity and interoperability in IoT applications.

Equivalent

The ISO1450BDWR is an isolated RS-485 transceiver. Equivalent products include the following chips:
1. ISO1042
2. ADuM1201
3. ADuM1202
4. ADM2483
5. MAX1487
Always verify specifications and compatibility for your specific application before selecting an equivalent.

배송

배송 방법We

DHL, FedEx, TNT, UPS 또는 선택한 다른 운송업체를 통해 글로벌 배송 서비스를 제공합니다.


배송 요금 참조 (DHL/FedEx):

DHL은: 배송 비용은 $25-$45 (0.5kg)에서 2-5 영업일의 추정적 배달 시간이 있습니다.

FedEx는: 배송 비용은 $25-$40 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

UPS는: 배송 비용은 $25-$45 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

TNT는: 배송 비용은 $25-$65 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

EMS는: 배송 비용은 $30-$50 (0.5kg)에서 7-15 영업일의 추정적 배달 시간을 제공합니다.

등록된 항공우편: 배송 비용은 $2-$4 (0.1kg), 예상 배달 시간 5-20 영업일.

지불

Payment Methods

지불 기간은 100% 사전 지불입니다.

현재, 우리는 아래 지불 방법만 받아들입니다.:

1. PayPal

2. 신용/직불 카드

3. 전선 전송

비슷한