이미지는 참조용만

LM4040D50IDBZR

Name: LM4040D50IDBZR
Rating: 4.7 (12 reviews)

IC VREF SHUNT 1% SOT23-3

제조업체
Mfr.부분 #LM4040D50IDBZR
패키지 SOT-23 (DBZ)-3
데이터시트 LM4040D50IDBZR DataSheet
재고 있음3084

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package	Tape & Reel (TR),Cut Tape (CT)
ProductStatus	Active
ReferenceType	Shunt
OutputType	Fixed
Voltage-Output(Min/Fixed)	5V
Current-Output	15 mA
Tolerance	±1%
TemperatureCoefficient	150ppm/°C
Noise-10Hzto10kHz	80µVrms
Current-Cathode	95 µA
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	TO-236-3, SC-59, SOT-23-3

개요

Description

The LM4040D50IDBZR is a fixed-output shunt voltage reference from Texas Instruments (LM4040 family). It provides a precise reference voltage referenced to ground for analog circuitry, using only a small bias current from the supply.
Key points:
- Fixed Vout: the nominal output is defined by the D50 variant (check the datasheet for the exact value).
- Shunt regulator: Anode to ground, cathode to Vin via a bias resistor; Vout is the voltage across the device.
- Low power and good temperature stability; suitable as a precision reference for ADC/DACs, regulators, and sensor interfaces.
- Package: IDBZR indicates a RoHS-compliant, compact SOT-23–style package.
Design notes:
- Bias current must be chosen per datasheet to keep the device in regulation across temperature.
- Use the recommended resistor to set current; ensure Vin exceeds Vout by the required headroom.
For exact electrical specs (tolerance, tempco, Iout range, pinout), consult the TI LM4040D50IDBZR datasheet.

Features

LM4040D50IDBZR is TI’s fixed-output shunt voltage reference. Key features:
- Fixed reference: 4.096 V nominal (D50 variant) with high accuracy
- Precision/shunt regulator: low dynamic impedance and tight initial accuracy
- Temperature stability: low tempco for stable output over temperature
- Wide operating current: supports a broad Imin…Imax range (works from microamps to a few milliamps)
- Low noise and good line/load regulation
- Easy to use: two-terminal shunt device (no external reference resistor needed for regulation)
- Package options: small, surface-mount packages (e.g., SOT-23, SC‑70) with RoHS-compliant variants
- Robustness: suitable for ADC references, voltage references in instrumentation, and regulator ancillary applications
Note: exact electrical specs (accuracy, tempco, current ranges) vary by lot and package. Please consult the TI datasheet for the precise numbers for your lot/marking.

Package

SOT-23 (3-pin) package; Pb-free RoHS-compliant (IDBZR suffix).

Pinout

- Pin count: 3 pins (SOT-23-3 package).
- Function: Fixed shunt voltage reference (2.50 V). It clamps its cathode-to-anode voltage to ~2.5 V and is used as a precision reference in regulator circuits (cathode to the input through a resistor, anode to ground; third pin typically not connected or used as per package).

Manufacturer

Texas Instruments (TI). TI is a global semiconductor company that designs and manufactures analog and mixed-signal integrated circuits used in a wide range of electronic systems.

Application

LM4040D50IDBZR is a low‑power, precision shunt voltage reference. Applications include:
- Stable reference for ADC/DAC and precision analog circuits
- Bias/reference for op-amps, comparators, and sensor front‑ends
- Reference node for microcontrollers and battery‑ powered portable gear
- Reference in small linear or switching power supplies
- LED driver and display circuit references needing stable voltage

Equivalent

LM4040D50IDBZR is TI’s 2.5 V fixed shunt voltage reference (two-terminal). Do you want cross-references to parts from specific vendors (e.g., Analog Devices, ON Semiconductor, Microchip, NXP, Renesas)? If yes, tell the target vendors and I’ll provide exact equivalents.