이미지는 참조용만

LMC7221AIM5

Name: LMC7221AIM5
Rating: 4.7 (12 reviews)

IC COMP TINY CMOS R-R IN SOT23-5

제조업체
Mfr.부분 #LMC7221AIM5
패키지 SOT-23 (DBV)-5
데이터시트 LMC7221AIM5 DataSheet
재고 있음6405

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package	Tape & Reel (TR),Cut Tape (CT)
ProductStatus	Active
Type	General Purpose
NumberofElements	1
OutputType	Open Drain
Voltage-SupplySingle/Dual(±)	2.7V ~ 15V, ±1.35V ~ 7.5V
Voltage-InputOffset(Max)	5mV @ 5V
Current-InputBias(Max)	0.04pA @ 5V
Current-Output(Typ)	30mA
Current-Quiescent(Max)	14µA
CMRRPSRR(Typ)	75dB CMRR, 80dB PSRR
PropagationDelay(Max)	10µs
OperatingTemperature	-40°C ~ 85°C
Package/Case	SC-74A, SOT-753
MountingType	Surface Mount

개요

Description

The LMC7221AIM5 is a precision voltage comparator designed for use in various electronic applications. It features a low offset voltage, low input bias current, and a wide supply voltage range, making it ideal for high-accuracy signal processing. The device operates on a single or dual power supply, allowing flexibility in circuit design.
Key specifications include a maximum input offset voltage of 500 µV, a high common-mode rejection ratio (CMRR), and a low supply current, making it suitable for battery-powered devices. The LMC7221 is packaged in a small form factor, enhancing its usability in compact designs.
Typical applications include level detection, voltage monitoring, and signal conditioning in instrumentation and control systems. Its excellent noise performance and thermal stability further enhance its applicability in precision measurement scenarios. Overall, the LMC7221AIM5 is a versatile and reliable choice for engineers seeking a high-performance comparator.

Features

The LMC7221AIM5 is a high-performance, precision operational amplifier designed for low-noise applications. Key features include:
1. Low Noise: Excellent low noise performance, making it suitable for audio and instrumentation applications.
2. Wide Bandwidth: High unity-gain bandwidth, typically around 1 MHz, allowing for fast signal processing.
3. Low Input Offset Voltage: Features low input offset voltage, enhancing accuracy in sensitive applications.
4. High Slew Rate: Fast slew rate, which improves response time for dynamic signals.
5. Single Supply Operation: Operates from a single power supply, simplifying circuit design.
6. Rail-to-Rail Output: Provides rail-to-rail output swing, maximizing output voltage range.
7. Low Power Consumption: Designed for low power usage, making it suitable for battery-powered devices.
These features make the LMC7221AIM5 ideal for applications such as sensor signal conditioning, active filters, and audio processing.

Package

The LMC7221AIM5 is packaged in a 5-Pin SOT-23 configuration.

Pinout

The LMC7221AIM5 is a high-speed, single-supply, precision operational amplifier. It features a pin count of 8 pins. The functions of the pins are as follows:
1. Inverting Input (Pin 2): The input where the signal to be amplified is applied in an inverted manner.
2. Non-Inverting Input (Pin 3): The input for the signal to be amplified without inversion.
3. Output (Pin 6): The amplifier's output where the amplified signal is available.
4. Negative Supply Voltage (Pin 4): Typically connected to ground for single-supply operation.
5. Positive Supply Voltage (Pin 7): Connects to the positive power supply.
6. Offset Null (Pin 1): Used for adjusting the input offset voltage.
7. NC (Pin 5): No connection; this pin is not used.
8. Compensation (Pin 8): For frequency compensation, though often connected internally.
The LMC7221AIM5 is commonly used in precision signal processing applications due to its low offset voltage and high slew rate.

Manufacturer

The LMC7221AIM5 is manufactured by Texas Instruments (TI). Texas Instruments is a global semiconductor design and manufacturing company headquartered in Dallas, Texas. Founded in 1930, TI is known for its wide range of products, including analog and embedded processing devices. The company serves various sectors, including automotive, industrial, communications, and consumer electronics. TI is recognized for its innovative solutions and contributions to the development of analog and digital signal processing technologies.

Application

The LMC7221AIM5 is a precision, low-power, single-supply operational amplifier primarily used in applications such as signal conditioning, instrumentation, data acquisition systems, and active filters. Its high input impedance and low offset voltage make it suitable for medical devices, sensor interfaces, and battery-operated equipment. Additionally, it can be employed in voltage followers and amplifiers for audio applications.

Equivalent

Equivalent products to the LMC7221AIM5 chip include the TLV221, TLV225, and LMV721. These op-amps offer similar specifications such as supply voltage range, bandwidth, and output characteristics. Always check the datasheets for specific parameters to ensure compatibility for your application.