이미지는 참조용만

LP2950CDTX-3.3/NOPB

Name: LP2950CDTX-3.3/NOPB
Rating: 4.7 (12 reviews)

IC REG LINEAR 3.3V 100MA TO252-3

제조업체
Mfr.부분 #LP2950CDTX-3.3/NOPB
패키지 TO-252 (NDP)-3
데이터시트
재고 있음7228

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package	Tape & Reel (TR),Cut Tape (CT)
ProductStatus	Active
OutputConfiguration	Positive
OutputType	Fixed
NumberofRegulators	1
Voltage-Input(Max)	30V
Voltage-Output(Min/Fixed)	3.3V
VoltageDropout(Max)	0.6V @ 100mA
Current-Output	100mA
Current-Quiescent(Iq)	120 µA
Current-Supply(Max)	14 mA
ProtectionFeatures	Over Current, Over Temperature, Short Circuit
OperatingTemperature	-40°C ~ 125°C (TJ)
MountingType	Surface Mount
Package/Case	TO-252-3, DPak (2 Leads + Tab), SC-63

개요

Description

The LP2950CDTX-3.3/NOPB is a fixed 3.3 V low‑dropout regulator from National Semiconductor/TI. It provides a simple, three-terminal LDO supply for battery or portable electronics, with:
- Output: 3.3 V fixed
- Dropout: around 0.5 V at 100 mA (low dropout)
- Quiescent current: very low (microamps to tens of microamps, depending on mode)
- Protection: built‑in current limit and thermal shutdown
- External caps: requires an input cap and an output cap (typical 4.7 µF or larger, tantalum or aluminum; ESR matters for stability)
- Packaging: Pb‑free (NOPB) in a surface‑mount package (CDTX denotes the package variant)
Common uses: microcontroller and analog circuitry in portable/battery-powered designs.
Notes: Pinout and exact ESR/Capacitance requirements vary by package; consult the datasheet for the CDTX package pin order and stability criteria.

Features

LP2950CDTX-3.3/NOPB Features:
- Fixed 3.3V low-dropout regulator (LDO)
- Max load current: ~100 mA
- Low dropout voltage (about 0.5 V at 100 mA)
- Low quiescent current
- Internal current limit and thermal shutdown protection
- Requires an output capacitor for stability (minimum ~1 µF; typical 4.7 µF recommended)
- Input voltage up to ~26 V
- Wide temperature range: -40°C to +125°C
- Pb-free (NOPB) and available in CDTX package
(Edited for conciseness; numbers may vary slightly by datasheet revision.)

Package

A three-pin TO-92 plastic package (through-hole) regulator.

Pinout

- Pin count: 3 pins
- Function: Fixed 3.3V low-dropout regulator (LDO) with input, ground, and output pins (Vin, GND, Vout) to provide a regulated 3.3V supply.

Manufacturer

Manufacturer: Texas Instruments (TI).
TI is an American multinational semiconductor company that designs and manufactures analog, embedded processing, and other integrated circuits. It acquired National Semiconductor, the original creator of the LP2950 family.

Application

LP2950CDTX-3.3/NOPB is a 3.3V fixed low-dropout regulator (up to about 150 mA). Applications: battery-powered portable devices needing a stable 3.3V rail; microcontrollers, sensors and peripheral analog/digital circuits; embedded systems and consumer electronics; telecom/industrial equipment power management; post-regulation from higher voltages (e.g., 5V). Requires suitable input/output capacitors for stability.

Equivalent

Common equivalents (3.3V LDOs; check pinout and current):
- LM2950-3.3 (TI/NSC)
- AMS1117-3.3 (Analog Devices/other makers)
- LT1117-3.3 (Linear Tech)
- LD1117V33 (ON Semi/others)
- MCP1700-3302E (Microchip)
Note: pinouts and max current differ; verify datasheets before substituting.