LT1076CR

이미지는 참조용만

LT1076CR

IC REG MULTI CONFIG ADJ 2A D2PAK

  • 제조업체
  • Mfr.부분 #LT1076CR
  • 패키지
  • 데이터시트
  • 재고 있음27324

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Part Status Discontinued at DigiKey
Base Product Number LT1076
Mounting Type Surface Mount
Package TO-263-8, D2PAK (7 Leads + Tab), TO-263CA
Supplier Device Package DDPAK-7
Packaging Tube

개요

Description

LT1076CR is a Linear Technology (now Analog Devices) buck switching regulator IC. It’s a high‑efficiency, monolithic controller with an internal power switch used to convert a higher DC input to a lower, regulated output.
Key points:
- Buck regulator architecture: requires external components (inductor, Schottky diode, input/output capacitors, and a feedback network) to set the output.
- Features typically include current‑mode control, overcurrent/overtemperature protection, and good transient response.
- Output voltage is set by a feedback divider; device is suitable for point‑of‑load and other DC‑DC applications.
- CR suffix denotes the package/temperature/lead‑frame variant (e.g., commercial temperature range in a specific package).
Common use:
- DC‑DC power supplies for embedded systems, battery-powered gear, telecom, and other applications needing efficient voltage conversion.
Note:
- For exact electrical specs (input range, output options, switching frequency, pinout), refer to the LT1076CR datasheet.

Features

LT1076CR is a 5A, high-voltage, step-down switching regulator. Key features include:
- Wide input range up to about 60V
- Adjustable output via external resistor divider (feedback control)
- Internal 5A switch with current-mode PWM
- Fixed-frequency operation (typical ~100 kHz)
- Protection: cycle-by-cycle current limit, overtemperature shutdown
- Enable/shutdown input forLatch-free shutoff
- Soft-start and minimal external components for regulation
- Requires external components: inductor, Schottky catch diode, input/output capacitors
- Packaging: CR suffix denotes RoHS/compliant 8-pin package (DIP/SO-8 variants)
Note: external components and layout are required for proper operation.

Package

LT1076CR is in an 8-pin plastic DIP (DIP-8) package.

Pinout

- Pin count: 8 pins (SO-8/DIP-8)
- Function: High-voltage switching regulator controller with an internal switch; used to implement switch-mode power supplies (buck/boost/inverting topologies) with external inductor, diode, and output components. Includes reference, error amplifier, oscillator, current limit, and shutdown.

Manufacturer

Analog Devices (the LT1076 originated with Linear Technology; Linear Technology was acquired by Analog Devices in 2017).
Analog Devices is a multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing (DSP) integrated circuits.

Application

LT1076CR is a 60V, 3A switching regulator capable of buck, boost and inverting topologies. Applications: automotive and industrial DC-DC converters, high-voltage pre-regulators, battery-powered power supplies, auxiliary rails for microprocessors/telecom, and LED driver/topology circuits using a wide input range.

배송

배송 방법We

DHL, FedEx, TNT, UPS 또는 선택한 다른 운송업체를 통해 글로벌 배송 서비스를 제공합니다.


배송 요금 참조 (DHL/FedEx):

DHL은: 배송 비용은 $25-$45 (0.5kg)에서 2-5 영업일의 추정적 배달 시간이 있습니다.

FedEx는: 배송 비용은 $25-$40 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

UPS는: 배송 비용은 $25-$45 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

TNT는: 배송 비용은 $25-$65 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

EMS는: 배송 비용은 $30-$50 (0.5kg)에서 7-15 영업일의 추정적 배달 시간을 제공합니다.

등록된 항공우편: 배송 비용은 $2-$4 (0.1kg), 예상 배달 시간 5-20 영업일.

지불

Payment Methods

지불 기간은 100% 사전 지불입니다.

현재, 우리는 아래 지불 방법만 받아들입니다.:

1. PayPal

2. 신용/직불 카드

3. 전선 전송

비슷한