이미지는 참조용만

LT1963ES8-3.3#PBF

Name: LT1963ES8-3.3#PBF
Rating: 4.7 (12 reviews)

IC REG LINEAR 3.3V 1.5A 8SOIC

제조업체
Mfr.부분 #LT1963ES8-3.3#PBF
패키지 SOP8
데이터시트 LT1963ES8-3.3#PBF DataSheet
재고 있음5499

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package	Bulk,Tube
ProductStatus	Active
OutputConfiguration	Positive
OutputType	Fixed
NumberofRegulators	1
Voltage-Input(Max)	20V
Voltage-Output(Min/Fixed)	3.3V
VoltageDropout(Max)	0.55V @ 1.5A
Current-Output	1.5A
Current-Quiescent(Iq)	1.5 mA
Current-Supply(Max)	120 mA
PSRR	63dB (120Hz)
ControlFeatures	Enable
ProtectionFeatures	Over Current, Over Temperature, Reverse Polarity
OperatingTemperature	-40°C ~ 125°C
MountingType	Surface Mount
Package/Case	8-SOIC (0.154, 3.90mm Width)

개요

Description

LT1963ES8-3.3#PBF is a fixed 3.3-volt low‑dropout regulator in an 8‑pin package (ES8 usually MSOP-8/SO-8 style; PBF means Pb‑free). It’s part of the LT1963 family from Linear Technology (now Analog Devices) and is used to generate a stable 3.3V rail from a higher input. Key features typically include: a fixed 3.3V output, enable/shutdown control, current‑limit protection, thermal shutdown, and good line/load regulation. It requires an appropriate output capacitor (with ESR within the datasheet’s range) and a suitable input supply to meet the load current with dropout considerations. The enable pin lets you turn the regulator on/off. For exact electrical specs, pinout, input/output ranges, quiescent current, and layout recommendations, consult the LT1963 datasheet and the Analog Devices product page.

Features

Here are concise features of LT1963ES8-3.3#PBF:
- Fixed 3.3 V output LDO regulator in an 8‑pin ES8 Pb‑Free (PBF) package.
- Enable/shutdown input to turn the regulator on/off.
- Wide input voltage range above 3.3 V (suitable for various sources).
- Low dropout with low quiescent current for efficiency.
- Internal protection: current limit and thermal/shutdown protection.
- Short‑circuit and protection against fault conditions.
- Output capacitor requirements (stability depends on capacitor ESR; follow datasheet).
- Good line/transeunt regulation and low output ripple/noise.
- RoHS compliant; operating temp typically from -40°C to 125°C.
Note: Exact electrical numbers (dropout, quiescent current, max load) vary by variant and conditions. Refer to the datasheet (LT1963ES8-3.3#PBF) for precise specs.

Package

8-pin surface-mount package (SO-8, S8), Pb-free (PBF).

Pinout

- Pin count: 8 pins (ES8 package)
- Function: Fixed 3.3V low-dropout linear regulator (LDO).

Manufacturer

- Manufacturer: Analog Devices, Inc. (ADI).
- What kind of company: A multinational American semiconductor company that designs, manufactures, and markets analog, mixed-signal, and digital signal processing integrated circuits. The LT prefix originates from Linear Technology, which ADI acquired.

Application

- Local 3.3V regulator for microcontrollers and logic circuits
- Clean power for precision analog front-ends (ADC/DAC, op-amps, instrumentation)
- Battery-powered/portable devices needing compact, efficient regulation
- RF/telecom front-ends and circuits needing good PSRR and fast transient response
- General-purpose fixed 3.3V supply in embedded systems and consumer electronics

Equivalent

Possible equivalents (3.3 V operation, 8-pin package, RRIO I/O):
- TI OPA2333
- Analog Devices AD8602
- Analog Devices AD8542
- Microchip MCP6002
Note: these are similar-function devices, not guaranteed pin-for-pin drop-ins. Check each datasheet for exact pinout, package, and specs before replacement.