이미지는 참조용만

LT3680IMSE#TRPBF

Name: LT3680IMSE#TRPBF
Rating: 4.7 (12 reviews)

IC REG BUCK ADJ 3.5A 10MSOP

제조업체
Mfr.부분 #LT3680IMSE#TRPBF
패키지 MSOP10
데이터시트
재고 있음3579

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package	Tape & Reel (TR)
ProductStatus	Active
Function	Step-Down
OutputConfiguration	Positive
Topology	Buck
OutputType	Adjustable
NumberofOutputs	1
Voltage-Input(Min)	3.6V
Voltage-Input(Max)	36V
Voltage-Output(Min/Fixed)	0.79V
Voltage-Output(Max)	30V
Current-Output	3.5A
Frequency-Switching	230kHz ~ 2.45MHz
SynchronousRectifier	No
OperatingTemperature	-40°C ~ 125°C (TJ)
MountingType	Surface Mount
Package/Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad

개요

Description

LT3680IMSE#TRPBF is the LT3680 DC-DC converter/controller in an IMSE package (MSOP with exposed pad) with tape-and-reel Pb-free packaging. The LT3680 is a high-voltage, high-efficiency dc-dc regulator that requires external passive components (inductor, diode or synchronous switch, sense/feedback resistors) and can be configured for buck, boost, or buck-boost applications depending on the surrounding circuitry. Key features typically include: wide input range, adjustable output, soft-start, enable/shutdown, current limit, and over-temperature protection. The “#TRPBF” suffix simply denotes the packaged tape-and-reel version that is Pb-free. For exact pinout, electrical specs, and reference circuit implementations, refer to the official datasheet and application notes.

Features

Here are the key features of the LT3680IMSE#TRPBF (Pb-free, Tape-and-Repair MSOP-8 variant):
- Dual synchronous buck regulator with integrated high-/low-side FETs
- Wide input voltage range suitable for automotive/industrial applications
- Two independently adjustable outputs (via feedback) with current-mode control
- Programmable switching frequency and/or synchronization options
- Enable input and Power-Good status output
- Soft-start to minimize inrush and output overshoot
- Comprehensive protection: overcurrent/short-circuit, undervoltage lockout, overvoltage protection, thermal shutdown
- High efficiency with fast transient response
- Small footprint in MSOP-8 package with exposed pad
- Pb-free, Tape-and-Reel packaging (TRPBF)
Note: For exact electrical specs (voltage ranges, currents, frequencies, and precise pinout), please consult the LT3680 datasheet.

Package

An MSOP-8 (3×3 mm) package. It’s Pb-free and comes on Tape & Reel (TR) packaging, as indicated by #TRPBF.

Pinout

Package: 10 pins (10-lead MSOP, suffix IMSE) plus exposed thermal pad.
Function (grouped, see datasheet for exact pin numbers and names):
- Power nodes: VIN (input supply), GND (ground/thermal pad), SW (switch/inductor node).
- Gate-drive: BOOST/ BST (bootstrap supply for internal switch).
- Regulation/control: FB (feedback), COMP (error‑amp/loop compensation).
- Control/interface: RUN/EN (enable/shutdown), MODE/SYNC (mode selection and/or external sync).
- Remaining pin(s): device-specific functions or NC.
For the precise pin‑number assignment and electrical details, consult the LT3680 datasheet.

Manufacturer

Manufacturer: Linear Technology Corporation (now part of Analog Devices, Inc.).
Type of company: a semiconductor company that designs and supplies high-performance analog integrated circuits—especially power-management ICs, voltage regulators, data converters, amplifiers and other signal-conditioning devices for industrial, communications, automotive and consumer electronics.

Application

LT3680IMSE#TRPBF is a high‑efficiency DC–DC converter/LED driver. Typical application areas:
- Constant-current LED drivers for backlighting and signage
- Automotive lighting and dashboard/backlit displays
- Portable/battery-powered devices needing efficient buck/boost regulation
- Power supplies for LCD panels, displays, and keyboard backlighting
- Solar-powered lighting and other energy‑harvesting standalone systems