LTC1485IS8

이미지는 참조용만

LTC1485IS8

IC TRANSCEIVER HALF 1/1 8SOIC

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Supplier Rochester Electronics, LLC
Package Bulk
ProductStatus Active
Type Transceiver
Protocol RS422, RS485
NumberofDrivers/Receivers 1/1
Duplex Half
ReceiverHysteresis 60 mV
Voltage-Supply 4.75V ~ 5.25V
OperatingTemperature -40°C ~ 85°C
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

개요

Description

The LTC1485IS8 is an 8-pin high-side hot-swap controller from Linear Technology (Analog Devices). It protects a power rail during plug-in by driving an external N‑channel MOSFET and limiting inrush current.
Key points:
- Provides current-limit protection via a sense resistor to protect against shorts and overloads.
- Soft-start to control inrush when a board powers up.
- Overvoltage/undervoltage protection and thermal shutdown to guard the rail.
- Fault/flag output for remote indication; can be used for latch or auto-retry behavior depending on configuration.
- Uses an external MOSFET and sense resistor; the IS8 suffix indicates the 8-pin package.
Typical uses: hot-plug or hot-swap protection for boards in servers, telecom equipment, or any live power rail where controlled power-up and fault indication are needed.
For exact electrical specs, pinout, and application recommendations, see the LTC1485IS8 datasheet.

Package

The LTC1485IS8 is in an 8-pin plastic Small Outline package (SO-8), i.e., an 8‑lead SOIC package.

Pinout

Pin count: 8 pins (IS8 package).
Function: High-side hot-swap controller with current limit for protecting a supply rail; drives an external MOSFET and provides fault/status signaling with inrush/current protection.

Manufacturer

Manufacturer: Analog Devices, Inc. (ADI). It is a multinational semiconductor company that designs and manufactures analog, mixed-signal, and DSP integrated circuits (originally Linear Technology, acquired by ADI in 2017).

Application

Applications areas for LTC1485IS8:
- Hot-swap controllers and overvoltage protection for DC power rails
- High-side/low-side MOSFET gate drive for DC-DC converters
- Power-path protection in automotive and industrial systems
- Load switching and sequencing in distributed power architectures
- Fault protection and current-limit implementations in battery packs and power supplies

배송

배송 방법We

DHL, FedEx, TNT, UPS 또는 선택한 다른 운송업체를 통해 글로벌 배송 서비스를 제공합니다.


배송 요금 참조 (DHL/FedEx):

DHL은: 배송 비용은 $25-$45 (0.5kg)에서 2-5 영업일의 추정적 배달 시간이 있습니다.

FedEx는: 배송 비용은 $25-$40 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

UPS는: 배송 비용은 $25-$45 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

TNT는: 배송 비용은 $25-$65 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

EMS는: 배송 비용은 $30-$50 (0.5kg)에서 7-15 영업일의 추정적 배달 시간을 제공합니다.

등록된 항공우편: 배송 비용은 $2-$4 (0.1kg), 예상 배달 시간 5-20 영업일.

지불

Payment Methods

지불 기간은 100% 사전 지불입니다.

현재, 우리는 아래 지불 방법만 받아들입니다.:

1. PayPal

2. 신용/직불 카드

3. 전선 전송

비슷한