이미지는 참조용만

LTC4219IDHC-12

Name: LTC4219IDHC-12
Rating: 4.7 (12 reviews)

IC HOT SWAP CTRLR GP 16DFN

제조업체
Mfr.부분 #LTC4219IDHC-12
패키지 16-WFDFN Exposed Pad
데이터시트
재고 있음4551

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package	Tube
ProductStatus	Obsolete
Type	Hot Swap Controller, Monitor
NumberofChannels	1
InternalSwitch(s)	Yes
Applications	General Purpose
Features	Thermal Limit, UVLO
ProgrammableFeatures	Current Limit, Fault Timeout
Voltage-Supply	2.9V ~ 15V
Current-Output(Max)	5.6A
OperatingTemperature	-40°C ~ 85°C
Current-Supply	1.6 mA
MountingType	Surface Mount
Package/Case	16-WFDFN Exposed Pad

개요

Description

Introduction to LTC4219IDHC-12
- The LTC4219 is a high-side hot-swap controller that drives an external MOSFET to safely connect/disconnect a supply rail (typical in 12V backplanes or cards).
- It providing controlled inrush, current limit, and fault protection to protect both the power source and downstream circuitry.
Key features (typical):
- Programmable current limit and soft-start for inrush control
- Overcurrent protection with latch and status indication
- Overvoltage/undervoltage protection
- Thermal/overtemperature protection
- Optional reverse-current protection and fault logic
Applications:
- Hot-swap or ORing on 12V rails in servers, telecom/datacom gear, storage, and backplane applications
Package/abbreviation:
- LTC4219IDHC-12 denotes the 12-lead package variant and its temperature/leadframe grade as defined by the datasheet (pinout and ratings vary by package). Check the datasheet for exact details.
For exact specs, pinout, and circuit examples, refer to the LTC4219IDHC-12 datasheet.

Features

Key features of LTC4219IDHC-12:
- Hot-swap controller with gate drive for external N-channel MOSFETs
- Adjustable current limit via sense resistor
- Soft-start / controlled inrush current
- Input undervoltage and overvoltage protection (UVLO with hysteresis)
- Overcurrent protection (short-circuit) with latch or hiccup behavior
- Overtemperature protection with latch
- Reverse-battery and reverse-current protection
- Fault and Power-Good/Status signaling outputs
- Wide input voltage range suitable for multi-rail power systems
- Compact package (IDHC) for small-footprint designs
Note: For exact electrical specs and pinout details, please refer to the LTC4219IDHC-12 datasheet.

Package

The LTC4219IDHC-12 uses a 12‑lead DHC package, i.e., a 12‑pin thin small‑outline (TSSOP‑12) style package.

Pinout

- Pin count: 12 pins
- Function: LTC4219IDHC-12 is a hot-swap controller with surge/overcurrent protection for a power rail. It drives an external MOSFET to limit inrush current and protect the supply from faults (includes overcurrent/overvoltage protection and fault/status signaling).

Manufacturer

Analog Devices, Inc. (the former Linear Technology). ADI is a multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing integrated circuits (power management, data converters, amplifiers, etc.).

Application

Application areas of LTC4219IDHC-12:
- Hot‑swap protection and current limiting for 12V rails in servers, telecom, and networking gear
- Redundant/backplane power architectures (OR-ing, load sharing)
- PCI/PCIe/CompactPCI backplanes and blade-server systems
- Industrial/embedded equipment needing safe module insertion and controlled inrush
- General high‑side protection for modular power architectures and power-supply subsystems

Equivalent

Equivalent products (non-pin-for-pin but functionally similar hot-swap controllers with current limit and OV protection):
- TI TPS2430, TPS2431
- Onsemi NCP4306, NCP4311
- Maxim MAX16054
- Analog Devices ADM1272 / ADM1276
Note: exact cross-reference depends on packaging, voltage, current limit, and PG/EN signals; verify with distributor cross-reference.