이미지는 참조용만

M27C1001-10F1

Name: M27C1001-10F1
Rating: 4.7 (12 reviews)

IC EPROM 1MBIT PARALLEL 32CDIP

제조업체
Mfr.부분 #M27C1001-10F1
패키지 FDIP-32W
데이터시트
재고 있음3129

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package	Tube
ProductStatus	Obsolete
MemoryType	Non-Volatile
MemoryFormat	EPROM
Technology	EPROM - UV
MemorySize	1Mb (128K x 8)
MemoryInterface	Parallel
AccessTime	100 ns
Voltage-Supply	4.5V ~ 5.5V
OperatingTemperature	0°C ~ 70°C (TA)
MountingType	Through Hole
Package/Case	32-CDIP (0.600, 15.24mm) Window

개요

Description

The M27C1001-10F1 is a 1 Megabit (128K x 8-bit) CMOS EPROM (Erasable Programmable Read-Only Memory) chip. It offers non-volatile storage, allowing data to be retained without power. The "10" in its name indicates a maximum access time of 100 nanoseconds, making it suitable for high-speed applications.
This EPROM can be erased using ultraviolet light and reprogrammed, providing flexibility for developers. It typically operates from a 5V power supply and features a standard 32-pin DIP (Dual In-line Package) configuration, making it compatible with various circuit designs.
The M27C1001-10F1 is commonly used in applications like firmware storage, programmable logic devices, and system BIOS. Its reliability and performance make it an essential component in many electronic systems.

Features

The M27C1001-10F1 is a high-performance 1 Megabit (128K x 8-bit) EEPROM (Electrically Erasable Programmable Read-Only Memory) chip. Key features include:
- Memory Density: 1 Mbit (128K x 8 bits) capacity.
- Access Time: 10 ns speed, allowing fast data retrieval.
- Packaging: Available in a 32-pin dual in-line package (DIP) for easy integration.
- Voltage Range: Operates typically at 5V with a maximum of 6V for programming.
- Programming Type: Supports parallel programming, making it user-friendly for developers.
- Data Retention: Retains data for over 20 years under proper conditions.
- Erasure: The entire chip can be erased in a single operation using ultraviolet (UV) light.
- Compatibility: Compatible with standard TTL logic levels.
These features make the M27C1001-10F1 suitable for applications in embedded systems, firmware storage, and data backup.

Package

The M27C1001-10F1 is a 1 Mb (128K x 8) EPROM in a 32-pin DIP (Dual In-line Package) form factor. This package type is commonly used for easy insertion into circuit boards.

Pinout

The M27C1001-10F1 is a 1 Megabit (128K x 8) EEPROM (Electrically Erasable Programmable Read-Only Memory) with a DIP (Dual In-line Package) configuration. It has a total of 32 pins.
The pin functions are as follows:
1. A0-A16 (Pins 1-17): Address inputs.
2. Q0-Q7 (Pins 18-25): Data outputs (8 bits).
3. CE (Chip Enable, Pin 26): Activates the chip.
4. OE (Output Enable, Pin 27): Enables data output.
5. WE (Write Enable, Pin 28): Allows programming of the memory.
6. VCC (Pin 29): Power supply (+5V).
7. GND (Pin 30): Ground reference.
8. NC (No Connect, Pins 31, 32): Not connected (reserved for future use).
This device is primarily used for applications requiring non-volatile memory storage that can be electrically erased and reprogrammed.

Manufacturer

The M27C1001-10F1 is manufactured by STMicroelectronics, a global semiconductor company. STMicroelectronics specializes in designing and manufacturing a wide range of semiconductor solutions and integrated circuits for various applications, including automotive, industrial, consumer electronics, and telecommunications. The company is known for its innovative technologies and products, which include microcontrollers, memory devices, sensors, and power management solutions. STMicroelectronics was formed in 1987 through the merger of SGS Microelettronica and Thomson Semiconducteurs and has since become one of the leading players in the semiconductor industry.

Application

The M27C1001-10F1 is a 1 megabit (128KB) EPROM often used in embedded systems for storing firmware, configuration data, and program code in applications like automotive electronics, consumer electronics, telecommunications, and industrial control systems. Its UV erasability allows for easy updates, making it suitable for prototyping and development.

Equivalent

The M27C1001-10F1 is a 1 Mbit (128KB) EPROM. Equivalent products include:
1. 27C1001 (various speed grades)
2. 27C010 (compatible with slight variations in packaging)
3. M27C1001 (different speed options and manufacturers)
4. AT28C010 (from Atmel, EEPROM variant)
Always verify compatibility with your specific application requirements, such as pin configuration and voltage levels.