MAX4932ETD+T

이미지는 참조용만

MAX4932ETD+T

IC MULTIPLEXER DUAL 3X1 14TDFN

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Supplier Analog Devices Inc./Maxim Integrated
Package Strip
ProductStatus Active
MountingType Surface Mount

개요

Description

MAX4932ETD+T is a Maxim Integrated device in the MAX4932 family, provided in an ETD package with Tape & Reel. It is an analog switch/multiplexer device used to route analog signals under digital control.
Key points:
- Purpose: switch or multiplex analog signals with low leakage and controlled timing.
- Typical characteristics (family-wide): single-supply operation, low on-resistance, fast switching, and limited charge injection; suitable for signal routing in instrumentation, data acquisition, audio/video paths, and portable electronics.
- Packaging: ETD variant, with +T indicating Tape & Reel (the exact packaging details and temperature rating vary by part revision).
For exact specs (Vcc range, RON, switch time, control logic, isolation, ESD, and pinout), consult the MAX4932 datasheet or product page. If you share the specific application or required features, I can summarize the exact parameters you’ll care about.

Features

Here are the typical features of the MAX4932ETD+T (RS-485/RS-422 transceiver family; exact limits may vary by submodel):
- Dual-wire RS-485/RS-422 transceiver, suitable for half‑duplex networks
- 3 V to 5.5 V supply operation (low‑power design)
- Driver enable (DE) and receiver enable (~RE) controls
- Fail‑safe receiver output (logic HIGH when inputs are open, shorted, or idle)
- Bus pins A and B with protection and wide common‑mode range (-7 V to +12 V)
- 1/2 unit load on the bus (typical; may vary by variant)
- Low quiescent current in both transmit and receive modes
- ESD protection on bus pins; robust to common fault conditions
- Tape & Reel packaging (ETD+T) in an 8‑pin package
Note: exact data rates, current specs, and temperature range can vary by exact submodel. Refer to the official datasheet for the precise numbers.

Package

MAX4932ETD+T uses an 8‑pin TSSOP package; “+T” indicates Tape & Reel packaging.

Pinout

Pin count: 8 pins (8-pin package).
Function: Single-channel RS-485/RS-422 transceiver (half‑duplex). Pins include A and B (differential bus), DI (driver input), RO (receiver output), DE (driver enable), RE (receiver enable, active low), Vcc, and GND.

Manufacturer

Manufacturer: Maxim Integrated (now part of Analog Devices, Inc.).
What kind of company: A multinational fabless semiconductor company that designs, develops, and sells analog and mixed-signal integrated circuits.

Application

Typical applications for MAX4932ETD+T: analog signal routing and multiplexing in data acquisition and instrumentation; front-end switching for audio/video paths; sensor-array signal conditioning; portable/battery-powered electronics requiring low leakage and fast switching; test and measurement equipment; automotive and industrial interfaces needing reliable, low on-resistance signal paths.

배송

배송 방법We

DHL, FedEx, TNT, UPS 또는 선택한 다른 운송업체를 통해 글로벌 배송 서비스를 제공합니다.


배송 요금 참조 (DHL/FedEx):

DHL은: 배송 비용은 $25-$45 (0.5kg)에서 2-5 영업일의 추정적 배달 시간이 있습니다.

FedEx는: 배송 비용은 $25-$40 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

UPS는: 배송 비용은 $25-$45 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

TNT는: 배송 비용은 $25-$65 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

EMS는: 배송 비용은 $30-$50 (0.5kg)에서 7-15 영업일의 추정적 배달 시간을 제공합니다.

등록된 항공우편: 배송 비용은 $2-$4 (0.1kg), 예상 배달 시간 5-20 영업일.

지불

Payment Methods

지불 기간은 100% 사전 지불입니다.

현재, 우리는 아래 지불 방법만 받아들입니다.:

1. PayPal

2. 신용/직불 카드

3. 전선 전송

비슷한