MAX811REUS+T

이미지는 참조용만

MAX811REUS+T

IC SUPERVISOR 1 CHANNEL SOT143-4

  • 제조업체
  • Mfr.부분 #MAX811REUS+T
  • 패키지 SOT-143-4
  • 데이터시트
  • 재고 있음6708

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package Tape & Reel (TR),Bulk
ProductStatus Obsolete
Type Simple Reset/Power-On Reset
NumberofVoltagesMonitored 1
Voltage-Threshold 2.63V
Output Push-Pull, Totem Pole
Reset Active Low
ResetTimeout 140ms Minimum
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case TO-253-4, TO-253AA

개요

Description

MAX811REUS+T is Maxim’s MAX811 family voltage supervisor with optional watchdog/reset features. It monitors the supply rail and provides a controlled reset signal to a microcontroller or digital logic to avoid bad operation during power-up, brownouts, or fault conditions. Key ideas:
- Generates a clean, active-low RESET# output when Vcc is too low or a watchdog timeout occurs.
- Includes optional inputs for manual reset (MR) and watchdog (WDI) to extend or force a reset as needed.
- Provides a defined power-on reset delay so the MCU starts only after Vcc stabilizes.
- Flexible operation across typical MCU voltages (variants cover roughly 2.7–5.5 V; exact thresholds depend on the specific part).
- REUS+T suffix indicates packaging/ordering options (RoHS-compliant), with +T often denoting Tape & Reel packaging.
Common uses: MCU/systems reset protection, safe startup in embedded systems, battery-powered devices, and any design needing guaranteed reset behavior on power or watchdog events.
If you need exact electrical specs (thresholds, delay times, pinout) for your exact variant, I can pull the datasheet details.

Features

Here are the key features of MAX811REUS+T (Microprocessor supervisory with watchdog):
- POWER-ON RESET and undervoltage monitoring to ensure a safe MCU start
- Independent watchdog timer with external capacitor to set timeout
- WDI input to refresh/kick the watchdog; if not refreshed, reset is generated
- Manual reset input to force an immediate reset
- RESET output (active-low, RESET#) to drive the MCU/reset circuitry
- Wide supply range (approx. 2.7 V to 5.5 V) with low quiescent current
- Small RoHS-compliant package (REUS, tape-and-reel) for surface-mount designs
- Designed for standard industrial temperature range (typical -40°C to +85°C)
Note: The exact voltage-threshold options, timing ranges, and output characteristics depend on the specific MAX811 variant family; consult the datasheet for MAX811REUS+T for precise numbers.

Package

MAX811REUS+T is in an 8-pin surface-mount package (SOIC/SOP-8) with Tape-and-Reel packaging.

Pinout

Pin count: 8 pins (SOIC-8, D8).
Function: MAX811REUS+T is a microprocessor reset supervisor. It monitors Vcc and generates a reset signal to a microcontroller during power-up/power-down to ensure proper reset. It also provides an external manual/reset input to force a reset. No external components are required for typical use. The suffix indicates RoHS-compliant (REUS) packaging and tape-and-reel (T).

Manufacturer

Manufacturer: Maxim Integrated Products (now a subsidiary of Analog Devices, Inc.).
What kind of company: A global semiconductor company that designs and manufactures analog, mixed-signal, and power-management integrated circuits.

Application

Application areas of MAX811REUS+T:
- Microcontroller/microprocessor reset supervision (power-on reset with brown-out protection)
- Deterministic reset release for embedded systems, digital logic, FPGA/CPLD
- Battery-powered/portable devices needing a reliable, low-quiescent-reset solution
- Systems requiring clean reset during power cycles or supply dips (consumer electronics, industrial control, communications equipment)

Equivalent

Equivalent parts (voltage supervisors with reset/POR) to MAX811REUS+T include:
- TI TLV803/TLV803B
- Microchip MCP1314/MCP1315/MCP1316
- Onsemi NCP301/NCP302/NCP303
- Analog Devices ADM803/ADM804
These devices provide similar supervisor/reset functionality; pick by supply threshold and reset delay to match MAX811’s specs.

배송

배송 방법We

DHL, FedEx, TNT, UPS 또는 선택한 다른 운송업체를 통해 글로벌 배송 서비스를 제공합니다.


배송 요금 참조 (DHL/FedEx):

DHL은: 배송 비용은 $25-$45 (0.5kg)에서 2-5 영업일의 추정적 배달 시간이 있습니다.

FedEx는: 배송 비용은 $25-$40 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

UPS는: 배송 비용은 $25-$45 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

TNT는: 배송 비용은 $25-$65 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

EMS는: 배송 비용은 $30-$50 (0.5kg)에서 7-15 영업일의 추정적 배달 시간을 제공합니다.

등록된 항공우편: 배송 비용은 $2-$4 (0.1kg), 예상 배달 시간 5-20 영업일.

지불

Payment Methods

지불 기간은 100% 사전 지불입니다.

현재, 우리는 아래 지불 방법만 받아들입니다.:

1. PayPal

2. 신용/직불 카드

3. 전선 전송