이미지는 참조용만

MCR12DCMT4G

Name: MCR12DCMT4G
Rating: 4.7 (12 reviews)

SCR 600V 12A TO-252 (DPAK)

제조업체
Mfr.부분 #MCR12DCMT4G
패키지
데이터시트
재고 있음2414

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Part Status	Active
Base Product Number	MCR12
Voltage - Off State	600 V
Voltage - Gate Trigger (Vgt) (Max)	1 V
Current - Gate Trigger (Igt) (Max)	20 mA
Voltage - On State (Vtm) (Max)	1.9 V
Current - On State (It (RMS)) (Max)	12 A
Current - Hold (Ih) (Max)	40 mA
Current - Off State (Max)	10 µA
Current - Non Rep. Surge 50, 60Hz (Itsm)	100A @ 60Hz
SCR Type	Standard Recovery
Operating Temperature	-40°C ~ 125°C
Mounting Type	Surface Mount
Package	TO-252-3, DPAK (2 Leads + Tab), SC-63
Supplier Device Package	TO-252 (DPAK)
Packaging	Cut Tape (CT), Tape & Reel (TR)
Current - On State (It (AV)) (Max)	7.8 A

개요

Description

The MCR12DCMT4G is a type of semiconductor device known as a sensitive gate triac, primarily used for controlling AC power. It belongs to the family of triacs, which are devices designed to switch or control electrical power in circuits. The "MCR" designation indicates it's part of a series manufactured by ON Semiconductor.
This component features a maximum voltage rating of 800V and a current rating of 12A, making it suitable for various applications, including motor control, lighting, and heating systems. The "DC" in its name signifies that it can be triggered with a DC gate current, enhancing its versatility in different circuits.
The MCR12DCMT4G is packaged in a TO-220 form factor, allowing for efficient heat dissipation. Its sensitive gate design allows for low trigger currents, making it easier to control in circuit designs. Overall, it is a reliable choice for applications requiring efficient AC power management.

Features

The MCR12DCMT4G is a dual-channel, low on-resistance, N-channel MOSFET relay from ON Semiconductor. Key features include:
1. Dual Channels: Allows for control of two independent loads.
2. Low On-Resistance: Typically around 0.3 ohms, facilitating efficient current flow and minimizing power loss.
3. Voltage Ratings: Can handle up to 60V, making it suitable for a variety of applications.
4. Current Capacity: Supports continuous load currents up to 1A per channel, providing versatility in usage.
5. Logic Level Control: Designed for direct interfacing with microcontrollers and digital logic circuits.
6. Fast Switching Speed: Enables rapid on/off operation, ideal for high-speed applications.
7. Compact Package: Available in a surface-mount SOIC-8 package, saving space on PCBs.
These features make the MCR12DCMT4G suitable for applications in automation, signal switching, and other electronic control systems.

Package

The MCR12DCMT4G is packaged in a SOIC-8 (Small Outline Integrated Circuit) package type, which features an 8-lead configuration suitable for surface mounting on PCBs.

Pinout

The MCR12DCMT4G is a dual-channel, low-voltage, high-speed MOSFET driver. It features a total of 8 pins. The pin functions are as follows:
1. VDD - Power supply for the driver.
2. GND - Ground reference.
3. IN1 - Input for the first channel's gate drive signal.
4. IN2 - Input for the second channel's gate drive signal.
5. OUT1 - Output for driving the gate of the first MOSFET.
6. OUT2 - Output for driving the gate of the second MOSFET.
7. COM - Common point for the gate drivers, typically connected to the source of the respective MOSFETs.
8. NC - No connect; not internally connected and should not be used.
The device is designed for applications in motor control, power management, and other switching applications where fast turn-on/off times are required.

Manufacturer

The MCR12DCMT4G is manufactured by Texas Instruments Incorporated (TI). TI is a global semiconductor design and manufacturing company, known for its wide range of products including analog electronics, embedded processors, and digital signal processors. Founded in 1930, the company specializes in producing components for various applications, including automotive, industrial, communication, and consumer electronics. Texas Instruments is recognized for its innovation and contributions to the electronics industry, particularly in analog and mixed-signal processing technologies. Their products are widely used in numerous devices and systems, emphasizing efficiency and performance.

Application

The MCR12DCMT4G is a dual-channel isolated DC-DC converter primarily used in industrial automation, telecommunications, and automotive applications. It provides electrical isolation for sensor and control circuits, enabling voltage level shifting and noise reduction. It is suitable for powering control systems, data acquisition devices, and remote sensors, ensuring reliable performance in harsh environments.

Equivalent

The MCR12DCMT4G is a dual N-channel MOSFET. Equivalent products include the BSS138, 2N7000, and BS170 from various manufacturers, though specifications may vary. Always check the datasheet for compatibility in terms of voltage, current ratings, and package type.