이미지는 참조용만

MX25L6473EM2I-10G

Name: MX25L6473EM2I-10G
Rating: 4.7 (12 reviews)

IC FLASH 64MBIT SPI 104MHZ 8SOP

제조업체
Mfr.부분 #MX25L6473EM2I-10G
패키지
데이터시트 MX25L6473EM2I-10G DataSheet
재고 있음9908

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Series	MXSMIO™
Part Status	Not For New Designs
Base Product Number	MX25L6473
DigiKey Programmable	Not Verified
Memory Type	Non-Volatile
Memory Format	FLASH
Technology	FLASH - NOR
Memory Size	64Mbit
Memory Organization	8M x 8
Memory Interface	SPI
Clock Frequency	104 MHz
Write Cycle Time - Word, Page	50µs, 3ms
Voltage - Supply	2.7V ~ 3.6V
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Package	8-SOIC (0.209", 5.30mm Width)
Supplier Device Package	8-SOP
Packaging	Tube

개요

Description

MX25L6473EM2I-10G is Macronix’s 64‑Mbit serial flash memory (8 MBytes) in an 8‑pin package. It supports SPI and Quad I/O (QSPI) interfaces for high‑speed reads/writes, suitable for code storage and firmware updates in embedded systems. Operating voltage is typically 2.7–3.6 V. In Quad I/O mode, it can run at up to about 104 MHz for fast throughput. Memory organization includes 256‑byte pages, 4‑KB sectors, and larger blocks (e.g., 64 KB/256 KB) with a chip erase option. Features commonly include fast/dual/quad read commands, page program, block/sector erase, write protection, deep power‑down, and suspend/resume for in‑system programming, plus basic security and ID options. For exact timing, command set, and package options, consult the official datasheet.

Features

Here are the key features of MX25L6473EM2I-10G (Macronix 64 Mbit serial NOR flash):
- Density: 64-Mbit Serial NOR flash memory (8 MB total)
- Interfaces: SPI with Dual/Quad I/O and QPI support for higher throughput
- Voltage: 2.7 V to 3.6 V operation
- Memory organization: 256-byte page size; 4 KB sectors; 64 KB blocks
- Read/Write: Page program; sector/block erases; fast/continuous read modes
- Performance modes: Standard SPI, Dual/Quad SPI, and QPI read options
- Power: Deep power-down mode and low-power standby
- Endurance/Retention: Endurance ≈ 100k erase cycles; data retention typically 20 years
- Temperature: Industrial range (-40°C to +85°C)
- Package: 8-pin M2I package
- Security: Block protection and write-protection features
- Applications: Firmware/code storage, boot memory, microcontroller support
Note: Please verify exact timing, power values, and supported modes in the current datasheet for final design decisions.

Package

It comes in an 8-pin SOP (SOIC-8) package.

Pinout

- Pin count: 8 pins (8-pin package, e.g., SOIC-8/USON-8)
- Function: Serial SPI NOR flash memory (non-volatile storage). Interfaces via CS#, CLK, DI (MOSI), DO (MISO); includes WP# and HOLD# control pins, plus VCC and GND. Typical capacity is 64 Mbit with support for standard/fast read and Quad/SPI modes as applicable.

Manufacturer

- Manufacturer: Macronix International Co., Ltd. (MXIC)
- What kind of company: A Taiwan-based semiconductor company specializing in non-volatile memory products (NOR/NAND flash, ROM) and other memory solutions for embedded systems and electronics.

Application

MX25L6473EM2I-10G is a 64‑Mbit serial NOR flash. Typical applications:
- Boot and firmware storage for MCUs/SoCs (XIP capable)
- Firmware updates and secure boot
- Code storage for embedded systems in consumer electronics, printers, set‑top boxes
- Automotive/industrial ECUs and equipment
- Networking gear (routers, switches)
- IoT devices (parameter storage, data logging) and general-purpose embedded flash

Equivalent

Common drop-in equivalents (64Mbit SPI NOR Flash):
- Winbond: W25Q64JV, W25Q64FV
- GigaDevice: GD25Q64C, GD25Q64E
- STMicroelectronics: M25P64, M25P64-D
- ISSI: IS25LP064A, IS25LP064D
- Puya: P25Q64H
Note: verify exact voltage range, timing, and package compatibility; cross‑references vary by device family and QoS requirements.