이미지는 참조용만

NCP700BSN33T1G

Name: NCP700BSN33T1G
Rating: 4.7 (12 reviews)

IC REG LINEAR 3.3V 200MA 5TSOP

제조업체
Mfr.부분 #NCP700BSN33T1G
패키지 TSOP-5
데이터시트
재고 있음7289

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package	Tape & Reel (TR),Cut Tape (CT)
ProductStatus	Active
OutputConfiguration	Positive
OutputType	Fixed
NumberofRegulators	1
Voltage-Input(Max)	5.5V
Voltage-Output(Min/Fixed)	3.3V
VoltageDropout(Max)	0.185V @ 200mA
Current-Output	200mA
Current-Quiescent(Iq)	110 µA
Current-Supply(Max)	130 µA
PSRR	82dB (1kHz)
ControlFeatures	Enable
ProtectionFeatures	Over Current, Over Temperature
OperatingTemperature	-40°C ~ 125°C
MountingType	Surface Mount
Package/Case	SOT-23-5 Thin, TSOT-23-5

개요

Description

NCP700BSN33T1G is a fixed 3.3 V low-dropout (LDO) regulator from ON Semiconductor (NCP700 family). It provides a stable 3.3 V rail in a tiny 3-pin package (marked T1G) and includes an enable input to turn the regulator on/off for power saving. Typical strengths are low quiescent current, basic protection features (short-circuit and thermal shutdown), and suitability for battery-powered, space-constrained applications. It requires input and output capacitors per the datasheet to ensure stability. Common uses include supplying microcontrollers, sensors, and other low-power electronics from a higher-voltage or battery supply. For exact specs—input voltage range, dropout, quiescent current, current limit, pinout, and recommended capacitor values—consult the ON Semiconductor NCP700 datasheet and packaging guide for T1G.

Features

NCP700BSN33T1G features (concise):
- Fixed 3.3 V low-dropout regulator (LDO) with enable pin
- Ultra-low quiescent current (very small when enabled)
- Wide input voltage range (typically 2.5–5.5 V)
- Low dropout suitable for battery-powered apps
- Output current up to about 150 mA (typical)
- Protections: overcurrent protection and thermal shutdown
- Small package: SN-5/SOT-23-5 family (BSN) with tape-and-reel options
- Extended operating temperature range (typical -40°C to 125°C)
Note: For exact numbers (dropout at load, exact Iq, package details, and recommended operating conditions), please refer to the official datasheet.

Package

SOT-23-3 (SC-70 compatible) package.

Pinout

- Pin count: 3 pins (SOT-23-3 package)
- Function: 3.3 V threshold voltage detector (voltage supervisor) with an active-low RESET output. Pins are VDD, GND, and RESET (Reset#) to hold a microcontroller in reset while VDD is below ~3.3 V and release reset when the supply is stable.

Manufacturer

- Manufacturer: ON Semiconductor (ON Semiconductor Corporation).
- What kind of company: A global American semiconductor company that designs and manufactures analog, power-management, mixed-signal, and sensing ICs for automotive, industrial, communications, and consumer electronics.

Application

NCP700BSN33T1G is a fixed 3.3V LDO regulator. Typical applications include:
- Powering the 3.3V rail in battery-powered/portable devices
- Microcontroller and sensor subsystems
- IoT and wearables
- Embedded systems
- Cameras, displays, memory, and other consumer electronics requiring a stable 3.3V supply (low quiescent current).

Equivalent

Do you want cross‑references for a 3.3 V LDO regulator or a 3.3 V voltage supervisor/reset IC? Please specify the required package and load current to provide direct equivalents (from TI, Microchip, Renesas, etc.).