이미지는 참조용만

OP07CP

Name: OP07CP
Rating: 4.7 (12 reviews)

제조업체
Mfr.부분 #OP07CP
패키지
데이터시트
재고 있음4226

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package	Tube
ProductStatus	Obsolete
AmplifierType	General Purpose
NumberofCircuits	1
SlewRate	0.3V/µs
Current-InputBias	1.8 nA
Voltage-InputOffset	60 µV
Voltage-SupplySpan(Min)	6 V
Voltage-SupplySpan(Max)	36 V
OperatingTemperature	-40°C ~ 85°C
MountingType	Through Hole
Package/Case	8-DIP (0.300, 7.62mm)

개요

Description

OP07CP is a precision op-amp in the OP07 family, typically sold in an 8-pin package (CP variant). It’s designed for high DC accuracy and low drift, making it ideal for instrumentation, precision amplifiers, and servo/active-filter circuits.
Key points
- Very low input offset voltage (typ ~0.25 mV) and low drift; low input bias current.
- Moderate speed: gain-bandwidth around 0.6 MHz; slew rate ~0.3 V/µs.
- Not rail-to-rail; generally powered from dual supplies (commonly ±3 to ±15 V or ±3 to ±18 V). Input common-mode range and output swing don’t reach the rails.
- Best used in low-frequency, precision DC applications; not a modern rail-to-rail, single-supply device.
Packages
- Usually available in DIP-8 (and equivalents); CP suffix denotes a specific packaging variant.
In short: OP07CP is a classic, low-offset, precision op-amp for high-accuracy DC tasks, with limitations on supply rails and bandwidth compared to modern rail-to-rail parts. Always check the specific datasheet for your exact part variant.

Features

OP07CP is a precision, low-offset bipolar operational amplifier. Key features:
- Extremely low input offset voltage with low drift (high DC accuracy)
- Low input bias current
- High open-loop gain
- Moderate bandwidth with low noise suitable for DC precision and servo applications
- Wide supply voltage range (typical ±3 V to ±18 V; 6–36 V total)
- Not rail-to-rail (input common-mode and output swing limited away from rails)
- Good power supply rejection and common-mode rejection
- Available in DIP-8 plastic package (CP variant) for commercial/industrial use
Uses: precision amplifiers, instrumentation, active filters, DC servo loops, and other applications demanding stability and accuracy.

Package

OP07CP comes in an 8-pin plastic DIP package (DIP-8), i.e., through-hole, plastic dual in-line package.

Pinout

8 pins. It is a plastic-DIP, single precision operational amplifier with very low offset voltage (OP07 family).

Manufacturer

- Manufacturer: Analog Devices, Inc. (ADI).
- What kind of company: An American multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing ICs (including precision op-amps like the OP07).

Application

OP07CP is a precision, low-noise op-amp with very low offset and drift. Typical applications: instrumentation and measurement front-ends, precision DC amplification, active filters and integrators, data acquisition and sensor conditioning, servo/feedback control circuits, and high-accuracy audio preamps or other low-frequency signal processing.

Equivalent

OP07CP is a package/variant of the OP07 precision op-amp. Equivalents/cross-refs include:
- OP07, OP07C, OP07D, OP07DP (same family, different packaging)
- Modern replacements with similar specs: OPA277, OPA2277 (Analog Devices)
- LT1012, LT1013 (Linear Technology)
Note: choose based on supply range, offset/drift, and pinout; use vendor cross-reference tools for exact matches.