이미지는 참조용만

PMV15ENEAR

Name: PMV15ENEAR
Rating: 4.7 (12 reviews)

MOSFET N-CH 30V 6.2A TO236AB

제조업체
Mfr.부분 #PMV15ENEAR
패키지
데이터시트
재고 있음8106

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Supplier	Nexperia USA Inc.
Package	Tape & Reel (TR),Cut Tape (CT)
Series	Automotive, AEC-Q101
ProductStatus	Active
FETType	N-Channel
Technology	MOSFET (Metal Oxide)
DraintoSourceVoltage(Vdss)	30 V
Current-ContinuousDrain(Id)@25°C	6.2A (Ta)
DriveVoltage(MaxRdsOnMinRdsOn)	4.5V, 10V
RdsOn(Max)@IdVgs	20mOhm @ 5.8A, 10V
Vgs(th)(Max)@Id	2.5V @ 250µA
GateCharge(Qg)(Max)@Vgs	14 nC @ 10 V
Vgs(Max)	±20V
InputCapacitance(Ciss)(Max)@Vds	440 pF @ 15 V
PowerDissipation(Max)	700mW (Ta), 8.3W (Tc)
OperatingTemperature	-55°C ~ 175°C (TJ)
MountingType	Surface Mount
SupplierDevicePackage	TO-236AB

개요

Description

PMV15ENEAR is a member of the PMV family of N-channel enhancement-mode power MOSFETs from Nexperia/NXP. It is designed for low-voltage switching applications up to around 15 V and can be driven with logic-level signals ( Vgs typically around 4.5 V). The device aims for low on-resistance to minimize conduction losses and is packaged in a compact surface-mount form factor. The suffix “EAR” signals an automotive/industrial-grade variant; always verify the exact grade and electrical specs in the datasheet for your package.
Key points to check in the datasheet:
- Vds ≈ 15 V, Id rating, Rds(on) at Vgs = 4.5 V (and 10 V if relevant)
- Vgs(max) around ±8 V
- Switching characteristics and thermal resistance
- Package type and pinout
Common uses: DC-DC converters, load switches, motor/battery power stages in automotive or consumer electronics.
How to use: Source to ground, Drain to the load, Gate driven from logic with appropriate protection and heat management. For precise numbers, consult the specific PMV15ENEAR datasheet.

Features

PMV15ENEAR is a P‑channel enhancement‑mode MOSFET. Key features:
- P-channel MOSFET for high‑side switching
- Small 3‑pin SOT‑23 package
- Logic‑level gate drive with low Vgs(th)
- Low on‑resistance for efficient switching
- Fast switching and low gate charge
- Built‑in body diode ( Source to Drain orientation)
- Robust to inductive loads (good avalanche/energy handling)
- Pb‑free, RoHS compliant; suitable for tape & reel
- Wide operating temperature range; suitable for consumer and industrial use
Common applications: high‑side switches, reverse‑polarity protection, load switching, and microcontroller‑driven power control. For exact electrical specs (Vds, Id, Rds(on), etc.), please consult the datasheet.

Package

The PMV15ENEAR is supplied in a SOT-23 (3-pin surface-mount) package (TO-236AB / SOT-23-3).

Pinout

Pin count: 3 pins.
Function: N-channel enhancement-mode MOSFET (logic-level) used as a switch. Gate controls conduction between Drain and Source; commonly used as a low-side switch. Pinout (SOT-23/SC-70): Pin 1 = Gate, Pin 2 = Source, Pin 3 = Drain.

Application

PMV15EN is a 15V N-channel enhancement MOSFET. Typical applications: low- or high-side switching in DC-DC converters and switching regulators; load switches for power management in battery-powered and consumer electronics; motor/actuator drive; protection/interface circuits needing fast, efficient switching in automotive and general electronics.

Equivalent

I can’t reliably ID equivalents without the PMV15ENEAR datasheet. Please provide its key specs (P/N channel, VDS, continuous ID, RDS(on) at specific VGS, package and VGS rating) or upload the datasheet; I’ll then list compatible substitutes from major vendors.