이미지는 참조용만

RC0201FR-07100RL

Name: RC0201FR-07100RL
Rating: 4.7 (12 reviews)

RES 100 OHM 1% 1/20W 0201

제조업체
Mfr.부분 #RC0201FR-07100RL
패키지
데이터시트
재고 있음11573

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Series	RC_L
Part Status	Active
Resistance	100 Ohms
Tolerance	±1%
Power (Watts)	0.05W, 1/20W
Composition	Thick Film
Features	Moisture Resistant
Temperature Coefficient	±200ppm/°C
Operating Temperature	-55°C ~ 125°C
Package	0201 (0603 Metric)
Supplier Device Package	201
Size / Dimension	0.024" L x 0.012" W (0.60mm x 0.30mm)
Height - Seated (Max)	0.010" (0.26mm)
Number of Terminations	2
Packaging	Cut Tape (CT), Tape & Reel (TR)

개요

Description

RC0201FR-07100RL is a very small SMD fusible resistor in the 0201 footprint (about 0.6 × 0.3 mm). The “FR” suffix indicates fusible behavior: it normally acts as a resistor but will open like a fuse under an overcurrent condition, providing built‑in protection for tight-board layouts. The exact resistance value, tolerance, voltage rating, and maximum fuse current depend on this specific part number, so the datasheet for RC0201FR-07100RL should be consulted for precise specs. Typical use cases include protecting power rails or sensitive circuits in compact, battery-powered or densely populated boards where a discrete fuse is impractical. When selecting, verify the resistance value, Imax/Ihold, voltage rating, and any termination/assembly notes from the manufacturer’s datasheet. In short: it’s a tiny protective resistor that doubles as a fuse; confirm the exact electrical ratings from the datasheet for your application.

Features

RC0201FR-07100RL is a low-ohm, 0201-sized SMD resistor (often used as a current-sense/shunt).
Key features:
- Package: 0201 size (very small)
- Resistance: 0.071 Ω
- Tolerance: ±1%
- Temperature coefficient: typically 100–200 ppm/°C
- Power rating: about 1/16 W (≈0.063 W) typical for 0201 parts
- Temperature range: −55°C to +125°C
- Termination: Ni barrier with Sn finish
- Compliance: RoHS compliant, suitable for reflow soldering
- Packaging: Tape and reel (RL)
- Applications: current sensing, low-value shunt and precision resistance paths
Note: exact values may vary by manufacturer; consult the specific datasheet for precise tolerances, TC, and packaging details.

Package

0201 size SMD chip resistor package (0.6 × 0.3 mm).

Pinout

Pin count: 2 pins.
Function: A two-terminal resettable polymer PPTC (PTC) device used for overcurrent protection (polyfuse) in an 0201 package.

Manufacturer

Manufacturer: KOA Speer Electronics, Inc. It is a global electronics components company, specializing in resistors (chip/thick-film and thin-film) and other passive components.

Application

RC0201FR-07100RL is a 0201-size fixed thick-film resistor (flame-retardant). Its small footprint suits high-density, space-constrained boards. Applications include mobile devices (phones, wearables, tablets), notebooks/ultrabooks, IoT sensors, telecom/network gear, automotive electronics (ECUs, sensors), power-management circuits (voltage dividers, pull-ups/pull-downs, RC snubbers, EMI filtering) and general signal conditioning in compact PCBs.

Equivalent

RC0201FR-07100RL is a Ricoh 0201-size chip resistor. Equivalent parts are any 0201 chip resistors from major vendors that have the same resistance value, tolerance, and voltage rating (e.g., Yageo, Vishay, KOA, Murata). For a precise cross-reference, please provide the exact value (ohms), tolerance, and voltage/power specs from the datasheet.