SN65176BD

이미지는 참조용만

SN65176BD

IC TRANSCEIVER HALF 1/1 8SOIC

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Supplier Rochester Electronics, LLC,Texas Instruments
Package Bulk,Tube
ProductStatus Obsolete
Type Transceiver
Protocol RS422, RS485
NumberofDrivers/Receivers 1/1
Duplex Half
ReceiverHysteresis 50 mV
Voltage-Supply 4.75V ~ 5.25V
OperatingTemperature -40°C ~ 105°C
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

개요

Description

SN65176BD is a Texas Instruments RS-485/RS-422 differential bus transceiver (half‑duplex) in the SN65 family. It combines a line driver and a line receiver in one device to connect a microcontroller to a twisted‑pair network. Key pins typically include DI (data in), RO (data out), DE (driver enable), and RE (receiver enable). Features usually include a fail‑safe receiver (RO goes high if the bus is idle or open), protection for shorts, ESD tolerance, and operation from a single 3.3–5V supply. Data rates can reach tens of Mbps depending on cable length and topology. Common applications are industrial automation, motor/control networks, building automation, and other multi‑point RS‑485/RS‑422 communications. As with any TI part, check the exact datasheet for the BD variant you’re using for precise voltage, pinout, and performance specs.

Features

SN65176BD is an 8-bit bidirectional bus transceiver with 3-state outputs. Key features:
- 8-bit data bus on two sides (A and B)
- Direction control input (DIR) to select data flow A→B or B→A
- Output enable (OE) to tri-state the outputs
- 5V supply (TTL/CMOS-compatible inputs)
- Standard 28-pin package options (DIP/SOIC; Pb-free suffix BD)
- Suitable for bus bridging/backplane buffering and microprocessor/memory interfaces
用途: microprocessor data paths, backplane buffering, and bus isolation.

Package

SN65176BD uses an 8‑pin small‑outline package (SOIC‑8).

Pinout

- Pin count: 8 pins (SOIC-8/DIP-8 package).
- Function: High-speed CAN transceiver that interfaces a CAN controller to the CAN bus (provides TXD/RXD on the logic side and CANH/CANL on the bus; includes VCC/GND and protection).

Manufacturer

- Manufacturer: Texas Instruments (TI).
- What kind of company: An American multinational semiconductor company that designs and manufactures analog and embedded processing ICs; headquartered in Dallas, Texas (publicly traded on NASDAQ as TXN).

Application

SN65176BD is a serial differential transceiver. Typical applications include:
- Industrial automation and PLCs (remote I/O, fieldbus)
- Data communication over RS-422/RS-485 or other differential links
- Automotive electronics and in-vehicle networks
- Building automation, metering, instrumentation
- Embedded systems requiring robust, noise-immune serial signaling over long distances

Equivalent

I can give exact equivalents, but I need the device function and specs. Please share:
- What SN65176BD does (CAN transceiver, RS-232 transceiver, UART bridge, etc.)
- Supply voltage and package
- Any datasheet you’re referencing
With that, I’ll list precise cross-references (e.g., CAN transceivers, RS-232 drivers, or UART bridges) from TI, NXP, ON Semiconductor, etc.

배송

배송 방법We

DHL, FedEx, TNT, UPS 또는 선택한 다른 운송업체를 통해 글로벌 배송 서비스를 제공합니다.


배송 요금 참조 (DHL/FedEx):

DHL은: 배송 비용은 $25-$45 (0.5kg)에서 2-5 영업일의 추정적 배달 시간이 있습니다.

FedEx는: 배송 비용은 $25-$40 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

UPS는: 배송 비용은 $25-$45 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

TNT는: 배송 비용은 $25-$65 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

EMS는: 배송 비용은 $30-$50 (0.5kg)에서 7-15 영업일의 추정적 배달 시간을 제공합니다.

등록된 항공우편: 배송 비용은 $2-$4 (0.1kg), 예상 배달 시간 5-20 영업일.

지불

Payment Methods

지불 기간은 100% 사전 지불입니다.

현재, 우리는 아래 지불 방법만 받아들입니다.:

1. PayPal

2. 신용/직불 카드

3. 전선 전송

비슷한