이미지는 참조용만

SN65HVD232QDRG4Q1

Name: SN65HVD232QDRG4Q1
Rating: 4.7 (12 reviews)

IC TRANSCEIVER HALF 1/1 8SOIC

제조업체
Mfr.부분 #SN65HVD232QDRG4Q1
패키지
데이터시트
재고 있음9781

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Part Status	Active
Type	Transceiver
Protocol	CANbus
Number of Drivers/Receivers	1/1
Duplex	Half
Receiver Hysteresis	100 mV
Data Rate	1Mbps
Voltage - Supply	3V ~ 3.6V
Operating Temperature	-40°C ~ 125°C
Grade	Automotive
Qualification	AEC-Q100
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package	8-SOIC
Base Product Number	65HVD232

개요

Description

The SN65HVD232QDRG4Q1 is a robust CAN (Controller Area Network) transceiver designed for high-speed communication in automotive and industrial applications. It supports data rates up to 1 Mbps and is capable of operating over a wide temperature range, making it suitable for harsh environments. The device features a low-power standby mode, which helps reduce energy consumption during idle periods.
Key specifications include a wide supply voltage range (4.5V to 5.5V) and compatibility with 3.3V and 5V logic levels, allowing it to interface seamlessly with various microcontrollers. Its integrated protection features, such as fault-tolerant design and built-in thermal protection, enhance reliability. The SN65HVD232QDRG4Q1 is commonly used in automotive networks, industrial automation, and other applications requiring robust communication protocols.

Features

The SN65HVD232QDRG4Q1 is a high-speed CAN transceiver designed for automotive and industrial applications. Key features include:
1. High-Speed Communication: Supports up to 1 Mbps data rates, ensuring efficient bus communication.
2. Low Power Consumption: Operates with a low quiescent current, making it suitable for battery-powered applications.
3. Wide Supply Voltage Range: Operates from 4.75V to 5.25V, accommodating various system power requirements.
4. Integrated Transceiver Functions: Combines the transmitter and receiver in a single package, simplifying design.
5. Fail-Safe Design: Features thermal shutdown and fault protection to enhance reliability.
6. Slew Rate Control: Provides programmable slew rates to minimize EMI.
7. Bus-Driven Wake-Up: Allows for wake-up from low-power modes, improving system responsiveness.
8. ESD Protection: Offers robust ESD protection to ensure reliability in harsh environments.
These features make the SN65HVD232QDRG4Q1 suitable for robust and efficient CAN network implementations.

Package

The SN65HVD232QDRG4Q1 is packaged in a 16-pin HTQFP (Thin Quad Flat Pack) form factor.

Pinout

The SN65HVD232QDRG4Q1 is a CAN transceiver with a pin count of 8. Its key functions include:
1. CAN Bus Communication: It enables differential signaling for CAN communication.
2. Transmit and Receive: Pins for TXD (transmit data) and RXD (receive data) facilitate data transfer between the CAN controller and the transceiver.
3. Dominant and Recessive States: The device supports dominant and recessive states on the CAN bus.
4. Power Management: Includes pins for power supply (VCC) and ground (GND).
5. Fail-Safe Operation: It has features for fault detection and protection against short-circuits.
6. Standby Mode: Supports low-power modes for energy efficiency.
The transceiver is designed for robust communication in automotive and industrial applications, ensuring reliable data transmission and reception over the CAN bus.

Manufacturer

The manufacturer of the SN65HVD232QDRG4Q1 is Texas Instruments (TI). Texas Instruments is a global semiconductor company headquartered in Dallas, Texas, that designs and manufactures a wide range of electronic components, including integrated circuits (ICs), processors, and analog devices. The company specializes in providing solutions for various applications, such as automotive, industrial, communication, and consumer electronics. TI is known for its innovation and extensive product portfolio, making it a key player in the semiconductor industry. The SN65HVD232QDRG4Q1 is a CAN transceiver, commonly used in automotive and industrial applications for communication over Controller Area Network (CAN) buses.

Application

The SN65HVD232QDRG4Q1 is a CAN transceiver used in automotive applications, industrial automation, and medical devices. It facilitates reliable communication over Controller Area Network (CAN) protocols, supporting robust data exchange in environments with electrical noise. Key areas include vehicle networks, industrial control systems, building automation, and equipment monitoring. Its features enhance data integrity and interoperability in various embedded systems.

Equivalent

Equivalent products to the SN65HVD232QDRG4Q1 chip include the TI SN65HVD233, SN65HVD234, and the Analog Devices ADuM1201. These chips serve similar functions in differential signaling for CAN bus applications. Always check specific datasheets for pin compatibility and electrical characteristics to confirm suitability for your application.