이미지는 참조용만

SPD18P06P

Name: SPD18P06P
Rating: 4.7 (12 reviews)

MOSFET P-CH 60V 18.6A TO252-3

제조업체
Mfr.부분 #SPD18P06P
패키지
데이터시트
재고 있음2821

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Supplier	Infineon Technologies,Rochester Electronics, LLC
Package	Tape & Reel (TR),Cut Tape (CT),Bulk
Series	SIPMOS®
ProductStatus	Obsolete
FETType	P-Channel
Technology	MOSFET (Metal Oxide)
DraintoSourceVoltage(Vdss)	60 V
Current-ContinuousDrain(Id)@25°C	18.6A (Tc)
DriveVoltage(MaxRdsOnMinRdsOn)	10V
RdsOn(Max)@IdVgs	130mOhm @ 13.2A, 10V
Vgs(th)(Max)@Id	4V @ 1mA
GateCharge(Qg)(Max)@Vgs	33 nC @ 10 V
Vgs(Max)	±20V
InputCapacitance(Ciss)(Max)@Vds	860 pF @ 25 V
PowerDissipation(Max)	80W (Tc)
OperatingTemperature	-55°C ~ 175°C (TJ)
MountingType	Surface Mount
SupplierDevicePackage	PG-TO252-3

개요

Description

SPD18P06P is a model code, but without the manufacturer or datasheet it’s hard to give a precise intro. If SPD18P06P refers to a Surge Protective Device (SPD), a quick overview:
- Purpose: Protect equipment from transient overvoltages on AC/DC power lines.
- Construction: Often MOVs or TVS elements, with protection modes such as L-N, L-PE, N-PE.
- Ratings (typical): nominal operating voltage, maximum continuous operating voltage (MCOV), surge/current ratings (In, Imax), response time (very fast).
- Standards: Type 1/Type 2 classifications, coordination with electrical codes; mounting on DIN rails is common.
- Features: status indicators, fault/replace indicators, sometimes remote signaling.
The “18P06P” portion likely encodes series, pole count, enclosure size, or specific options, which vary by manufacturer. Share the manufacturer or a link to the datasheet for a precise introduction.

Features

SPD18P06P is a Schottky barrier rectifier (18 A, 60 V). Key features:
- VRRM: 60 V; IF(AV): 18 A
- Very low forward voltage drop (typ ~0.5 V at 18 A) for high efficiency
- Ultra-fast switching with negligible reverse recovery
- High surge/current capability for brief overloads
- Low leakage at rated temps
- Wide operating Temp range: typically -55°C to +150°C
- Pb-free, RoHS compliant
- Robust molded/plastic case suitable for surface-mount or through-hole variants
- Ideal for SMPS/DC-DC rectification, freewheeling, polarity protection, and other high-speed power applications

Package

The package type isn’t fixed for SPD18P06P; it varies by vendor. Check the specific datasheet. Common MOSFET packages include TO‑220, DPAK (TO‑252), and D2PAK (TO‑263). Please provide the manufacturer or datasheet link.

Pinout

SPD18P06P is a 3‑pin P‑channel MOSFET. Pins and functions:
- Gate (G): control terminal; voltage here turns the channel on/off.
- Drain (D): main current terminal where load connects.
- Source (S): supply/reference terminal (more positive for a P‑channel device).
When gate is pulled sufficiently below the source, the P‑channel device conducts from source to drain.

Application

SPD18P06P is a P-channel power MOSFET. Common applications include:
- High-side switching in DC power rails and load switches
- Battery protection and reverse-polarity protection
- Power-management in DC-DC converters (buck/boost, synchronous rectification)
- High-side switches in motor drivers
- Solar inverters, UPS, and other power-path applications
- Portable electronics power management and protection circuits
Note: use according to the device’s voltage/current specs.