STM32G474CET3TR

이미지는 참조용만

STM32G474CET3TR

IC MCU 32BIT 512KB FLASH 48LQFP

  • 제조업체
  • Mfr.부분 #STM32G474CET3TR
  • 패키지
  • 데이터시트
  • 재고 있음27461

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Series STM32G4
Part Status Active
Base Product Number STM32G474
Core Processor ARM® Cortex®-M4
Core Size 32-Bit
Speed 170MHz
Connectivity CANbus, I2C, IrDA, LINbus, QSPI, SAI, SPI, UART/USART, USB
Peripherals Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT
Number of I/O 38
Program Memory Size 512KB (512K x 8)
Program Memory Type FLASH
RAM Size 128K x 8
Voltage - Supply (Vcc/Vdd) 1.71V ~ 3.6V
Data Converters A/D 20x12b SAR; D/A 7x12b
Oscillator Type Internal
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount
Supplier Device Package 48-LQFP (7x7)
Package 48-LQFP
Packaging Tape & Reel (TR)

개요

Description

STM32G474CET3TR is STMicroelectronics’ 32‑bit MCU from the STM32G4 family. It uses an ARM Cortex‑M4F core with a floating‑point unit and DSP instructions, delivering high performance for precise control loops and signal processing while remaining power‑efficient. The G474 devices target mixed‑signal and motor‑control applications, combining robust analog features with a broad peripheral set.
Key points:
- Cortex‑M4F core with FPU and DSP
- Rich analog: ADCs, DACs, comparators, op‑amps, and other analog front‑ends
- Advanced timers, PWM ideal for motor control
- Peripherals: multiple communication interfaces (USB, CAN, SPI, I2C, USART), memory interfaces, crypto accelerators
- LCD and capacitive sensing capabilities in some variants
- CET3TR denotes a specific package/reel option; check the datasheet for exact package, memory, voltage, and temperature specs
For precise clock speeds, memory sizes, and exact peripherals for this exact variant, consult the STM32G474CET3TR datasheet and product selector.

Features

STM32G474CET3TR (G4 family) features (concise):
- CPU: ARM Cortex‑M4F core with DSP and single‑precision FPU; up to about 170 MHz.
- Memory: on‑chip Flash and RAM; EEPROM emulation; multiple configurations per package.
- Peripherals: USB Full‑Speed (OTG), CAN FD, multiple SPI/I2C/UART/USART, and serial interfaces.
- Analog: multiple 12‑bit ADCs and DACs; internal op‑amps and comparators.
- Timers: advanced‑control timer plus general‑purpose timers for PWM and timing.
- DMA: comprehensive DMA controller for efficient data transfer.
- Security: hardware crypto accelerator (AES/DES/CRC) and RNG; memory protection options.
- Power/ clocks: flexible clock system with low‑power modes (Sleep/Stop/Standby with RTC); 1.7–3.6V operation.
- Debug/trace: SWD/JTAG for development and debugging.
- Other: LCD controller/driver options (where applicable on this variant) and standard ST peripherals.
Note: exact Flash/RAM sizes, package options, and some peripherals vary by variant. Refer to the official datasheet for precise figures for CET3TR.

Package

LQFP-100 (100-pin low-profile quad flat package, typically 14×14 mm with 0.5 mm pitch).

Pinout

- Pin count: 100 pins (LQFP-100 package)
- Function: STMicroelectronics STM32G474CET3TR is a 32-bit ARM Cortex-M4F microcontroller (STM32G4 family) intended for embedded control with integrated peripherals (timers, ADC/DAC, USB/CAN, etc.).

Manufacturer

- Manufacturer: STMicroelectronics (STMicroelectronics N.V.)
- What kind of company: A global semiconductor company (multinational corporation) that designs, manufactures, and sells integrated circuits, including microcontrollers and sensors.

Application

STM32G474CET3TR is a high-performance Cortex‑M4 mixed-signal MCU for real-time control and DSP. Typical applications include:
- Motor control (BLDC/PMSM, servo drives)
- Power electronics and inverter control
- Audio DSP and voice processing
- Industrial automation and sensor interfacing (CAN, USB, SPI/I2C, ADC/DAC)
- Automotive body electronics
- IoT/edge devices and smart home appliances
- Robotics and actuators
- Data acquisition and instrumentation

Equivalent

Do you mean pin-compatible drop-ins within ST, or functionally similar parts from other vendors? If pin-compatible: check other STM32G4 CET3 family devices with the identical package and memory. If cross-vendor: look for Cortex‑M4 MCUs with similar peripherals and package, but exact electrical compatibility varies. Please specify package, memory, required peripherals, and operating voltage.

배송

배송 방법We

DHL, FedEx, TNT, UPS 또는 선택한 다른 운송업체를 통해 글로벌 배송 서비스를 제공합니다.


배송 요금 참조 (DHL/FedEx):

DHL은: 배송 비용은 $25-$45 (0.5kg)에서 2-5 영업일의 추정적 배달 시간이 있습니다.

FedEx는: 배송 비용은 $25-$40 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

UPS는: 배송 비용은 $25-$45 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

TNT는: 배송 비용은 $25-$65 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

EMS는: 배송 비용은 $30-$50 (0.5kg)에서 7-15 영업일의 추정적 배달 시간을 제공합니다.

등록된 항공우편: 배송 비용은 $2-$4 (0.1kg), 예상 배달 시간 5-20 영업일.

지불

Payment Methods

지불 기간은 100% 사전 지불입니다.

현재, 우리는 아래 지불 방법만 받아들입니다.:

1. PayPal

2. 신용/직불 카드

3. 전선 전송