이미지는 참조용만

TNY288KG-TL

Name: TNY288KG-TL
Rating: 4.7 (12 reviews)

IC OFFLINE SWITCH FLYBACK 12ESOP

제조업체
Mfr.부분 #TNY288KG-TL
패키지 12-BESOP(0.350",8.89mmWidth),11Leads,ExposedPad
데이터시트 TNY288KG-TL DataSheet
재고 있음3055

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Package	Tape & Reel (TR),Cut Tape (CT)
Series	TinySwitch®-4
ProductStatus	Active
OutputIsolation	Isolated
InternalSwitch(s)	Yes
Voltage-Breakdown	725V
Topology	Flyback
DutyCycle	67%
Frequency-Switching	124kHz ~ 140kHz
Power(Watts)	23 W
FaultProtection	Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit
ControlFeatures	EN
OperatingTemperature	-40°C ~ 150°C (TJ)
Package/Case	12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
SupplierDevicePackage	12-ESOP

개요

Description

TNY288KG-TL is a Power Integrations TinySwitch family off-line switcher IC. It combines a high-voltage MOSFET (about 650–700 V) with a PWM controller to drive flyback converters in a single chip, enabling compact, low-cost AC–DC power supplies.
Key points:
- Designed for low-power flyback supplies (wall adapters, phone chargers, LED drivers).
- Built-in startup, current limit, thermal shutdown, and fault protection.
- Fixed-frequency operation with EMI-friendly features (frequency jitter/valley switching in some variants).
- Wide input range (typical 85–265 VAC) and high efficiency, including no-load/emergency operation benefits.
- Minimal external components required.
Package: 8-pin package; “TL” denotes a specific package/lead form variant. Exact pinout and electrical specs vary by variant.
For precise electrical characteristics, pinout, and application circuits, consult the TNY288KG-TL datasheet and Power Integrations’ application notes.

Features

TNY288KG-TL features (concise):
- Integrated 700V high‑voltage MOSFET
- Primary‑side current‑mode control with valley switching for high efficiency
- Fixed switching frequency with EMI‑reducing jitter
- Soft‑start and robust protection: overcurrent, short‑circuit, thermal shutdown
- Wide input range suitable for off‑line flyback supplies (low standby power)
- Minimal external components required (compact BOM)
- Ideal for small offline SMPS, adapters, and chargers
- Packaging: 8‑pin device; TL indicates Tape & Reel availability
Note: Always verify exact specs from the datasheet for your application.

Package

It’s an 8-pin DIP (DIP-8) TinySwitch-II package, Tape‑and‑Reel (TL) version (RoHS-compliant).

Pinout

- Pin count: 8 pins (DIP-8/SO-8), TL = Tape & Reel package variant.
- Function: TinySwitch-TL device with an integrated high-voltage MOSFET for off-line flyback SMPS. Provides startup, switching control, current limit, protection (overload/thermal), and feedback via the opto-coupler on the secondary side to regulate the output.
- Typical primary-side pins (conceptual): DRAIN (HV input), SOURCE (return), FB (feedback from optocoupler), VCC (IC supply), IS (current sense/limit), GND/return; remaining pins are typically NC or reserved. For exact pin mapping, consult the TNY288KG-TL datasheet.

Manufacturer

- Manufacturer: Power Integrations.
- What kind of company: A semiconductor company that designs and markets high-voltage switching ICs and other power-management ICs for switch-mode power supplies (a fabless company that outsources fabrication).

Application

- Low-power isolated offline flyback power supplies
- Universal-input wall adapters and USB phone/tablet chargers
- Compact battery chargers
- Standby/auxiliary power for consumer electronics
- Small isolated LED driver circuits

Equivalent

TNY288KG-TL is a Power Integrations TinySwitch-II device. Equivalents in the same family with similar specs include TNY277, TNY278, TNY279, and TNY280. For an exact drop‑in replacement, use Power Integrations’ Cross Reference tool to match input range, output power, pinout, and package (–TL = tape-and-reel).