이미지는 참조용만

TPS22961DNYR

Name: TPS22961DNYR
Rating: 4.7 (12 reviews)

IC PWR SWITCH N-CHAN 1:1 8WSON

제조업체
Mfr.부분 #TPS22961DNYR
패키지
데이터시트
재고 있음8261

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Part Status	Active
Switch Type	General Purpose
Number of Outputs	1
Ratio - Input:Output	1:1
Output Configuration	High Side
Output Type	N-Channel
Interface	On/Off
Voltage - Load	3V ~ 5.5V
Voltage - Supply (Vcc/Vdd)	0.8V ~ 5.5V
Current - Output (Max)	6A
Rds On (Typ)	6.5mOhm
Input Type	Non-Inverting
Features	Load Discharge, Slew Rate Controlled
Operating Temperature	-40°C ~ 125°C (TJ)
Mounting Type	Surface Mount
Supplier Device Package	8-WSON (3x3)
Package / Case	8-WDFN Exposed Pad
Base Product Number	TPS22961

개요

Description

The TPS22961DNYR is a single-channel load switch from Texas Instruments designed for power management applications. It features a low on-resistance (RDS(on)) to minimize power losses and enhance efficiency. The device can handle a wide input voltage range, typically from 1.8V to 5.5V, making it suitable for various applications, including battery-powered devices, portable electronics, and power routing in system designs.
Key features include adjustable turn-on time through an external capacitor, integrated thermal protection, and a built-in voltage level drop-out detection to ensure reliable operation. The TPS22961DNYR also incorporates reverse current blocking, which protects the device from unwanted backflow of current when turned off.
With its compact package and high performance, the TPS22961DNYR is ideal for applications requiring precise control of power delivery, such as in smartphones, tablets, and IoT devices.

Features

The TPS22961DNYR is a high-performance load switch designed for power management applications. Key features include:
1. Input Voltage Range: Supports 1.0V to 5.5V, making it versatile for various applications.
2. Low On-Resistance: Offers an RON of approximately 25 mΩ at 5V, minimizing power loss and heat generation.
3. Controlled Rise and Fall Times: Integrated soft-start functionality helps reduce inrush current and manage power sequencing.
4. High Side Switch: Provides efficient control for powering devices.
5. Enable Pin: Active-high control for easy integration into circuits.
6. Reverse Current Protection: Prevents back-feeding of current, enhancing circuit reliability.
7. Thermal Protection: Built-in features to mitigate overheating and ensure safe operation.
8. Compact Package: Available in a small 2.5mm x 2.5mm VQFN package for space-constrained designs.
These features make the TPS22961DNYR suitable for mobile devices, consumer electronics, and portable applications requiring efficient power management.

Package

The TPS22961DNYR is packaged in a 2-mm × 2-mm, 6-pin VQFN (Very Thin Quad Flat No-lead) package.

Pinout

The TPS22961DNYR is a load switch from Texas Instruments with a pin count of 6. Its primary function is to control the power delivery to a load by providing an on/off switch capability for power paths.
The pin functions are as follows:
1. IN (Pin 1): Power input.
2. SW (Pin 2): Switch output connected to the load.
3. GND (Pin 3): Ground reference.
4. ON (Pin 4): Control input to enable or disable the switch; active high.
5. FLT (Pin 5): Fault indicator output; signals over-current or thermal shutdown events.
6. NC (Pin 6): No connect, should not be connected to anything.
The TPS22961 is designed for applications requiring controlled power management, allowing for efficient power distribution with minimal voltage drop and reduced power loss.

Manufacturer

The TPS22961DNYR is manufactured by Texas Instruments (TI), a global semiconductor company. Texas Instruments designs and produces a wide range of analog and embedded processing chips, serving various industries including automotive, industrial, communications, and consumer electronics. Established in 1930, TI is known for its innovation in integrated circuits, power management, and signal processing solutions, making it a key player in the electronics sector. The TPS22961 is a power distribution switch that features low on-resistance and fast switching times, catering to applications where efficient power management is essential.

Application

The TPS22961DNYR is a load switch ideal for applications requiring power management in portable devices, battery-powered systems, and industrial equipment. It is used in smartphones, tablets, laptops, and wearable devices for efficient power distribution, power sequencing, and controlling power to subsystems. Additionally, it can be employed in automotive applications and consumer electronics to manage power rails and reduce inrush current.

Equivalent

Equivalent products for the TPS22961DNYR include the NXP FSUSB30, ON Semiconductor NCP81239, and the Microchip MCP1700-5002E. For similar performance in load switch applications, consider the TI TPS22916, TPS22962, or the Analog Devices ADP2360. Always verify specifications and compatibility for your specific application.