이미지는 참조용만

TSSP77038TR

Name: TSSP77038TR
Rating: 4.7 (12 reviews)

SENSOR REMOTE REC 38.0KHZ 40M

제조업체
Mfr.부분 #TSSP77038TR
패키지
데이터시트
재고 있음3409

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Supplier	Vishay Semiconductor Opto Division
Package	Tape & Reel (TR),Cut Tape (CT)
ProductStatus	Active
SensingDistance	40m
BPFCenterFrequency	38.0kHz
Voltage-Supply	2.5 V ~ 5.5 V
Current-Supply	700 µA
Orientation	Side or Top View
MountingType	Surface Mount

개요

Description

Introduction to TSSP77038TR
- Type: 38 kHz infrared remote-control receiver with integrated demodulator (TSSP family from Vishay).
- Function: Converts modulated IR signals from remote controls into a clean digital data stream for a microcontroller.
- Internals: Built-in preamplifier, automatic gain control, 38 kHz band-pass filter, and demodulator.
- Output: Three-pin device (GND, VCC, OUT); CMOS/TTL-compatible logic output.
- Power: Operates from 2.7–5.5 V; consumption is in the low mA range.
- Packaging: TR indicates Tape-and-Reel packaging (for automated assembly).
- Applications: Common in TVs, set-top boxes, audio/video gear, and other IR remote receivers.
- How to use: Power the device, connect OUT to a microcontroller input (with pull-up if needed), and decode the resulting data stream with a standard IR protocol (NEC, RC5, etc.).

Features

Here are the key features of TSSP77038TR (infrared receiver):
- 38 kHz IR remote receiver with integrated preamplifier, AGC, and 38 kHz band-pass filter
- Demodulated, TTL/CMOS-compatible data output (active low)
- 3-pin package: Vcc, GND, OUT
- High ambient-light and EMI immunity; built-in noise rejection
- Low external components; direct to microcontroller
- Wide operating voltage: typical 2.7–5.5 V
- Low supply current (typical in the 1–2 mA range)
- Suitable for standard IR remote protocols; outputs a clean data stream
- Tape & Reel (TR) packaging for automated assembly
Note: Verify exact electrical specs in the latest datasheet for your application conditions.

Package

TR indicates Tape‑and‑Reel packaging. The TSSP77038TR is a 3‑pin surface‑mount IR receiver in a molded SMD package.

Pinout

- Pin count: 3 pins
- Function: 38 kHz infrared remote control receiver (with built-in preamp, AGC, and demodulator) that outputs a digital data signal. Pins are Vcc, GND, and OUT.

Manufacturer

- Manufacturer: Vishay Intertechnology (Vishay Semiconductors).
- What kind of company: A global, multinational manufacturer of electronic components, including discrete semiconductors and optoelectronic devices (IR receivers, diodes, transistors, capacitors, resistors, etc.).

Application

- 38 kHz IR remote-control receiver modules for consumer electronics and appliances.
- Common uses: TVs, set-top boxes, DVD/Blu-ray players, A/V receivers, projectors, audio gear.
- Home appliances: air conditioners, microwaves, washing machines, etc.
- Embedded IR control in toys and gadgets requiring line-of-sight remote reception.

Equivalent

Equivalents (38 kHz demodulated IR receivers) include:
- TSOP1738, TSOP4838 (Vishay/Avago)
- HX1838
- HS0038B
- HSDL-3200/3202 family (Avago)
- VS1838B IR receiver module
Note: pinouts and voltages vary by part and packaging, so check compatibility or use a suitable adapter/level shifting.