W25Q64JVSSAQ

이미지는 참조용만

W25Q64JVSSAQ

IC FLASH 64MBIT SPI/QUAD 8SOIC

  • 제조업체
  • Mfr.부분 #W25Q64JVSSAQ
  • 패키지
  • 데이터시트
  • 재고 있음4865

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Series SpiFlash®
Part Status Active
Base Product Number W25Q64
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 64Mbit
Memory Organization 8M x 8
Memory Interface SPI - Quad I/O
Clock Frequency 133 MHz
Write Cycle Time - Word, Page 3ms
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 105°C (TA)
Mounting Type Surface Mount
Package 8-SOIC (0.209", 5.30mm Width)
Supplier Device Package 8-SOIC
Packaging Tube
Access Time 6 ns

개요

Description

The W25Q64JVSSAQ is a 64M-bit serial flash memory device, manufactured by Winbond Electronics Corporation. This memory chip is part of the SpiFlash® family and is designed for use in a variety of electronic products, providing reliable storage for embedded systems.
Key features of the W25Q64JVSSAQ include:
1. Storage Capacity: It offers 64 megabits (8 megabytes) of storage capacity, which is organized as 8,192 programmable pages of 256 bytes each.

2. Interface: The device communicates via a Serial Peripheral Interface (SPI), supporting standard, dual, and quad SPI modes for flexible data transfer rates.
3. Performance: It provides fast read speeds and efficient write capabilities, supporting a frequency of up to 133MHz in fast read mode.
4. Low Power Consumption: Designed for low power operation, it has deep power-down modes and low standby current.
5. Endurance and Reliability: The chip offers high endurance with 100,000 program/erase cycles and data retention of up to 20 years.
6. Package Options: Available in various package forms to accommodate different design requirements, including SOIC, WSON, and others.
The W25Q64JVSSAQ is widely used in consumer electronics, industrial applications, and IoT devices for its balance of storage capacity, performance, and reliability.

Features

The W25Q64JVSSAQ is a 64Mb (megabit) serial flash memory chip from Winbond. It features a 3V supply voltage range and utilizes the Serial Peripheral Interface (SPI) for communication, supporting standard, dual, and quad SPI operations. This chip offers a high-performance memory solution with a 104 MHz clock frequency for fast data transfer rates.
Key features include:
1. Density and Organization: 64Mb capacity, organized as 8M bytes (8,388,608 bytes).
2. Performance: Supports up to 104 MHz clock frequency, enabling fast read and write operations.
3. Interface: SPI, with support for single, dual, and quad I/O modes, increasing flexibility and speed.
4. Security: Provides advanced protection modes, including block protection and OTP (One-Time Programmable) regions to enhance data security.
5. Power Efficiency: Low-power consumption with deep power-down mode to save energy.
6. Endurance and Data Retention: High endurance with up to 100,000 program/erase cycles and data retention of up to 20 years.
7. Package Options: Available in various package types, such as SOP, WSON, and others, to suit different applications.
These features make it suitable for a wide range of applications, including consumer electronics, industrial equipment, and automotive systems.

Package

The W25Q64JVSSAQ is a 64Mb (8MB) Serial NOR Flash memory chip by Winbond. It comes in an 8-pin SOIC (Small Outline Integrated Circuit) package, which is commonly used for various electronic and computing applications due to its compact size and ease of use.

Pinout

The W25Q64JVSSAQ is a 64M-bit (8M-byte) Serial Flash memory device from Winbond. It features a total of 8 pins with the following functions:
1. CS# (Chip Select): This pin enables the device, allowing it to communicate with the SPI bus.
2. DO (Data Out) / SO (Serial Output): Used to output data during read operations.
3. WP# (Write Protect): Provides a hardware method to protect the status register from write operations.
4. GND (Ground): Ground reference for the power supply.
5. DI (Data In) / SI (Serial Input): Receives data from the master device during write operations.
6. CLK (Clock): Provides the timing for data transfer.
7. HOLD#: Pauses the device operations without deselecting it.
8. VCC (Power Supply): Supplies the power to the device.
These pins allow the W25Q64JVSSAQ to interface with microcontrollers using the SPI (Serial Peripheral Interface) protocol, making it suitable for applications that require storage expansion, such as firmware storage and data logging.

Manufacturer

The W25Q64JVSSAQ is manufactured by Winbond Electronics Corporation. Winbond is a Taiwanese company that specializes in the production of semiconductor products, particularly in the areas of memory solutions. They are known for manufacturing a wide range of memory products, including DRAM and Flash memory. The company serves various sectors, such as consumer electronics, computing, communication, and automotive, providing vital components for digital applications.

Application

The W25Q64JVSSAQ is a 64Mb (megabit) serial NOR flash memory chip commonly used for reliable data storage. It is often utilized in applications such as consumer electronics (e.g., digital cameras and GPS devices), industrial equipment, automotive systems, IoT devices, and telecommunications. These applications benefit from its fast read/write speeds, low power consumption, and ability to retain data without power, making it ideal for firmware storage, data logging, and boot code.

Equivalent

The W25Q64JVSSAQ is a 64Mb Serial NOR Flash memory chip by Winbond. Equivalent products include:
1. Micron MT25QL064: A similar 64Mb Serial NOR Flash offering with comparable specifications.
2. Spansion/Cypress S25FL064L: Another 64Mb Serial NOR Flash option with similar features.
3. Macronix MX25L6406E: Offers similar capacity and functionality.
4. Adesto/Dialogs AT25SF641: Provides equivalent storage and performance.
These equivalents can vary slightly in terms of voltage, temperature range, and other specifications, so it's important to check compatibility for your specific application.

배송

배송 방법We

DHL, FedEx, TNT, UPS 또는 선택한 다른 운송업체를 통해 글로벌 배송 서비스를 제공합니다.


배송 요금 참조 (DHL/FedEx):

DHL은: 배송 비용은 $25-$45 (0.5kg)에서 2-5 영업일의 추정적 배달 시간이 있습니다.

FedEx는: 배송 비용은 $25-$40 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

UPS는: 배송 비용은 $25-$45 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

TNT는: 배송 비용은 $25-$65 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

EMS는: 배송 비용은 $30-$50 (0.5kg)에서 7-15 영업일의 추정적 배달 시간을 제공합니다.

등록된 항공우편: 배송 비용은 $2-$4 (0.1kg), 예상 배달 시간 5-20 영업일.

지불

Payment Methods

지불 기간은 100% 사전 지불입니다.

현재, 우리는 아래 지불 방법만 받아들입니다.:

1. PayPal

2. 신용/직불 카드

3. 전선 전송