이미지는 참조용만

W25Q80EWZPIG

Name: W25Q80EWZPIG
Rating: 4.7 (12 reviews)

IC FLASH 8MBIT SPI/QUAD 8WSON

제조업체
Mfr.부분 #W25Q80EWZPIG
패키지
데이터시트
재고 있음5760

+BOM은 RFQ는

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

Series	SpiFlash®
Part Status	Active
Base Product Number	W25Q80
DigiKey Programmable	Not Verified
Memory Type	Non-Volatile
Memory Format	FLASH
Technology	FLASH - NOR
Memory Size	8Mbit
Memory Organization	1M x 8
Memory Interface	SPI - Quad I/O, QPI
Clock Frequency	104 MHz
Write Cycle Time - Word, Page	800µs
Voltage - Supply	1.65V ~ 1.95V
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Package	8-WDFN Exposed Pad
Supplier Device Package	8-WSON (6x5)
Packaging	Tube

개요

Description

W25Q80EWZPIG is Winbond’s 8‑Mbit serial flash memory. It provides non-volatile storage for firmware and data in embedded systems and is accessed over an SPI interface.
Key points:
- Capacity and organization: 1 MB total; 256‑byte page size; 4 KB sectors; 64 KB blocks.
- Interface and speed: SPI serial interface; supports standard SPI read/write commands (and fast read); typical clock up to ~104 MHz (depending on variant).
- Operations: Page Program up to 256 bytes; Sector Erase (4 KB); Block Erase (64 KB); Chip Erase available; Write Enable/Latch (WEL) and status register handling; supports hold and write-protect features.
- Voltage and temp: operating voltage commonly 2.7–3.6 V; temperature range usually -40 to 85 °C.
- Package: 8-pin small-outline package (code ZPIG).
- Applications: firmware storage, boot ROMs, data logging, microcontroller peripherals.
In short: a compact 8‑Mbit SPI serial flash ideal for code and data storage in budget/embedded applications.

Features

Here are the key features of Winbond W25Q80EWZPIG:
- Density: 8 Mbit (1 MB) serial flash memory
- Interface: SPI serial interface (standard SPI; some variants support dual/quad IO read)
- Voltage: 2.7–3.6 V operation
- Memory organization: 256-byte pages; 4 KB sectors; 32 KB/64 KB blocks; chip erase
- Speed: fast read capability up to high MHz range (typical SPI up to 104 MHz)
- Programming: page program (up to 256 bytes per operation)
- Endurance/Retention: ~100,000 program/erase cycles; data retention ~20 years
- Power modes: Deep power-down and low standby current
- Security/Protection: write-protect (WP#), status/lock bits, OTP area
- Temperature range: -40°C to 85°C (industrial)
- Package: 8-pin package (ZPIG/DIP-like footprint)
- Applications: boot code storage, firmware updates, embedded systems
Note: exact features can vary by specific sub-variant; verify the datasheet for the W25Q80EWZPIG you’ve got.

Package

8-pin SOP (SOIC) package.

Pinout

- Pin count: 8 pins (SOP-8)
- Function: Serial SPI flash memory (Winbond W25Q80EW): 8 Mbit non-volatile storage with SPI interface (CS, SCK, MOSI/DI, MISO/DO) plus WP and HOLD pins, plus Vcc and GND.

Manufacturer

- Manufacturer: Winbond Electronics Corp.
- What kind of company: A Taiwanese semiconductor company that designs and manufactures memory integrated circuits (e.g., NOR Flash, DRAM, NVRAM) and sells memory ICs worldwide.

Application

W25Q80EWZPIG is a serial SPI flash memory used for firmware and data storage in embedded systems. Common applications:
- Firmware storage and boot code for MCUs/SoCs
- Code/data storage for IoT devices, consumer electronics, routers, printers
- Configuration data, logs and lookup tables in industrial, automotive and medical equipment
- Firmware updates and standalone data logging in sensors, meters and wearables
- General low-power, nonvolatile storage for embedded applications

Equivalent

Equivalent SPI flash (8Mbit, 3.0–3.6V, 8-pin):
- Winbond W25Q80EW (same family)
- Macronix MX25L8006E
- GigaDevice GD25Q80B
- ISSI IS25LP080D
- Puya P25Q80
- SST SST25VF080B
Note: verify JEDEC ID, timing, and voltage for pinout compatibility.