W25X20CLUXIG

이미지는 참조용만

W25X20CLUXIG

100% 원래 &새로운

배송 준비 24 시간

365 일 보장

RFQ 및더 많은 할인

사양

EU RoHS Compliant
ECCN (US) EAR99
Part Status Active
HTS COMPONENTS
Automotive No
PPAP No
Cell Type NOR
Chip Density (bit) 2M
Architecture Sectored
Boot Block Yes
Number of Bits/Word (bit) 8
Number of Words 256K
Programmability Yes
Timing Type Synchronous
Maximum Erase Time (S) 2/Chip
Interface Type Serial (SPI, Dual SPI)
Maximum Operating Frequency (MHz) 104
Minimum Operating Supply Voltage (V) 2.3
Typical Operating Supply Voltage (V) 2.5|3|3.3
Maximum Operating Supply Voltage (V) 3.6
Operating Current (mA) 14
Minimum Operating Temperature (°C) -40
Maximum Operating Temperature (°C) 85
Command Compatible Yes
ECC Support No
Support of Page Mode No
Mounting Surface Mount
Package Height 0.53
Package Width 3
Package Length 2
PCB changed 8
Standard Package Name SON
Supplier Package USON
Pin Count 8
Block Organization Symmetrical
Address Bus Width (bit) 24
Sector Size 4Kbyte x 64
Page Size 256byte
Max. Access Time (ns) 8
Maximum Programming Time (ms) 0.8/Page
Programming Voltage (V) 2.3 to 3.6
Program Current (mA) 15
Supplier Temperature Grade Industrial
Minimum Endurance (Cycles) 100000

개요

Description

The W25X20CLUXIG is a serial NOR flash memory chip manufactured by Winbond. It features a storage capacity of 2 megabits (256 kilobytes) and operates using the SPI (Serial Peripheral Interface) protocol, making it suitable for a variety of embedded applications. The chip supports a range of data transfer speeds, typically up to 104 MHz, allowing for efficient read/write operations.
Key features include a high endurance of up to 100,000 program/erase cycles and a data retention period of up to 20 years. It comes in various package types, including SOIC and WSON, catering to different design needs. The W25X20CLUXIG is often used in consumer electronics, automotive applications, and industrial devices for storing firmware, configuration data, and user settings due to its reliability and compact size.
Developers can easily integrate it into systems using the standard SPI commands, making it a popular choice in the market for low-cost, high-performance memory solutions.

Features

The W25X20CLUXIG is a 2 Mbit (256 K × 8) serial NOR Flash memory chip from Winbond. Key features include:
1. Interface: Utilizes a Serial Peripheral Interface (SPI) with support for dual and quad SPI modes, enhancing data transfer speed.
2. Speed: Offers a maximum clock frequency of 104 MHz in quad mode, enabling faster read and programming operations.
3. Voltage: Operates on a supply voltage of 2.7V to 3.6V, making it suitable for low-power applications.
4. Sector Structure: Features a uniform sector architecture with 32 programmable sectors of 64 Kbytes each, allowing flexible memory management.
5. Endurance and Retention: Supports 100,000 program/erase cycles and data retention of up to 20 years.
6. Low Power Consumption: Designed for low-power applications, with a deep power-down mode.
7. Packages: Available in various packages, including 8-pin SOP and 16-pin WSON, for easy integration into different designs.
These features make the W25X20CLUXIG suitable for a wide range of applications, including consumer electronics, IoT devices, and embedded systems.

Package

The W25X20CLUXIG is packaged in an 8-pin SOIC (Small Outline Integrated Circuit) format. This surface-mount package is designed for compact applications, suitable for various electronic devices.

Pinout

The W25X20CLUXIG is a 2 Mbit (256 Kbyte) Serial Flash memory device from Winbond. It typically comes in a 8-pin SOIC or 8-pin WSON package.
Pin Count: 8 pins
Pin Functions:
1. CS (Chip Select): Activates the device for communication.
2. DO (Data Output): Outputs data from the memory to the host.
3. DI (Data Input): Receives data from the host to be stored.
4. WP (Write Protect): Enables write protection for the memory (active low).
5. HOLD: Pauses the operation without resetting the device (active low).
6. SCK (Serial Clock): Clock input for data transmission.
7. VCC: Power supply pin.
8. GND: Ground pin.
This device supports various modes of operation including SPI (Serial Peripheral Interface) and is commonly used in embedded systems for code storage and data logging.

Manufacturer

The W25X20CLUXIG is manufactured by Winbond Electronics Corporation, a Taiwanese company. Winbond specializes in memory solutions, including SRAM, DRAM, and flash memory products. The company is known for its innovations in non-volatile memory technologies, especially in the areas of NOR flash memory and embedded memory solutions. Established in 1987, Winbond serves a wide range of markets, including consumer electronics, automotive, and industrial applications. Their products are widely used in devices like smartphones, tablets, and various embedded systems.

Application

The W25X20CLUXIG is a 2 Mbit serial NOR Flash memory that is commonly used in embedded systems. Its application areas include firmware storage in microcontrollers, data logging, code shadowing, and boot code storage for devices such as consumer electronics, automotive systems, and industrial automation. It is suitable for applications requiring non-volatile memory with high-speed read/write capabilities and low power consumption.

Equivalent

The W25X20CLUXIG chip is a 2 Megabit (256K x 8) Serial Flash memory. Equivalent products include the Winbond W25Q20, Microchip SST25VF020B, and Cypress S25FL020A. These alternatives offer similar specifications, including SPI interface and capacity, although specific features may vary. Always verify compatibility regarding voltage, package type, and timing specifications before substitution.

배송

배송 방법We

DHL, FedEx, TNT, UPS 또는 선택한 다른 운송업체를 통해 글로벌 배송 서비스를 제공합니다.


배송 요금 참조 (DHL/FedEx):

DHL은: 배송 비용은 $25-$45 (0.5kg)에서 2-5 영업일의 추정적 배달 시간이 있습니다.

FedEx는: 배송 비용은 $25-$40 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

UPS는: 배송 비용은 $25-$45 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

TNT는: 배송 비용은 $25-$65 (0.5kg)에서 3-7 영업일의 추정적 배달 시간을 가지고 있습니다.

EMS는: 배송 비용은 $30-$50 (0.5kg)에서 7-15 영업일의 추정적 배달 시간을 제공합니다.

등록된 항공우편: 배송 비용은 $2-$4 (0.1kg), 예상 배달 시간 5-20 영업일.

지불

Payment Methods

지불 기간은 100% 사전 지불입니다.

현재, 우리는 아래 지불 방법만 받아들입니다.:

1. PayPal

2. 신용/직불 카드

3. 전선 전송